HP DL120 Specifications
Front View: Rear View: 1. Cover 1. Power supply cable socket 2. Power Supply (400 Watt) 2. Mouse connector 3. Optional Slim 9.5mm DVD ROM 3. NIC 1 connector 4. Slide-out System Insight Display 4. NIC 2 connector 5. Front USB connectors (2) 5. Serial Connector 6. Power Button, UID Button, and Front LED Indicators 6. Expansion slot 2, PCI-e x8, Low-profile, Half-length 7. Support for up to four Non-Hot Plug SATA or SAS Hard Drives 7. Expansion slot 1, PCI-e x16, Full high, Full-length 8. Non Hot Plug Dual Rotor Fans (4) 8. UID button/LED 9. Two PCI express Slots (one x16, one x4 Lanes) 9. Management NIC connector 10. Processor Socket (Intel® Xeon® Quad-Core) 10. Security - Trusted Platform Module Video connector 11. Six PC3-10600E UB ECC DDR3 Memory Slots 11. USB connectors (2) 12. USB connectors (2) 13. Keyboard connector What's New Support for HP NC365T 4-port Ethernet Server Adapter At a Glance The HP ProLiant DL120 G6 Server is an entry-level rack-optimized server providing you with all confidence of a HP ProLiant server. The single processor, 1U server is ideal for single-application IT infrastructure, web and edge-of-network applications. The HP ProLiant DL120 provides two PCI-Express slots with an optional 3rd x4 PCI-Express slot optional upgrades, including HP HBAs and Smart Array Controllers, provide support for SAS hard disk drives. DL120 G6 HP Lights Out 100i Remote Management provides cost-effective remote management from anywhere, anytime. Plus, you get the cost- effective solution of a single-processor platform with the performance advantages of quad-core technology. Processor : Intel® Xeon® processor X3400 series Intel® 3420 Chipset with up to 1333MHz Front Side Bus (FSB) NOTE: Intel® Celeron®, Pentium® and Core⢠dual-core processors does not support Registered (RDIMM) memory Memory : 6 DIMM sockets Supports up to 16GB, using 4GB PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at 2 DIMMs per Channel in 4 slots Supports up to 16GB, using 4GB Quad-Rank PC3-8500R DDR3 Registered (RDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 4 slots Supports up to 12GB, using 2GB PC3-10600R DDR3 Registered (RDIMM) memory, operating at 1333MHz when fully populated at 3 DIMMs per Channel in 6 slots Storage Controller : Entry and Base Model: HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) QuickSpecs HP ProLiant DL120 Generation 6 Overview DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 1
NOTE: Transfer rate: 3Gb/s SATA NOTE: Available upgrade: HP Smart Array Hot Plug Advance Pack for B110i Performance Model: HP Smart Array P212/256MB Controller (RAID 0/1/1 0/5/5 0) NOTE: Available upgrades: Battery Kit upgrade (for BBWC), and Smart Array Advanced Pack (SAAP) Internal Drive Support : Up to 4 LFF SATA/SAS HDD drive bays (1) Optional slim 9.5mm DVD-ROM or DVD RW Network Controller : Embedded HP NC107i PCI Express Gigabit Server Adapter Expansion Slots : Two total slots: (1) Full length PCI Express Gen 2 x16 slot (x16 connector) (1) Half-length, low-profile PCI Express x4 slot (x8 connector) Optional (1) PCI-X 1 x1 (x4 connector) USB 2.0 Ports : Up to 7 Total: (2) front; (1) internal; (4) rear accessible ports Internal USB port (optional) for flexible storage, security, or USB drive key deployment Infrastructure Management : HP ProLiant Lights-Out 100 simplifies server setup, health monitoring, control, and Lights-Out 100 remote administration. Can be upgraded with a Lights-Out 100 Advanced License for Virtual KVM (remote graphical console) and Virtual Media. With G6, ProLiant 100-series server administrators are able to deploy and monitor their servers using methods similar to 300 series servers and above. Agents and the Easy Set-up CD are available that provide a user experiences consistent with 300 series and above. With Easy Set-up CD, customers get SmartStart "like" deployment tools that reduce the time required for server setup and updates. Easy Set-up CDs and their ISO images are provided with each ProLiant G6 100-series server and are used to perform assisted installations for one or two servers. Users performing multi-server installations involving large numbers of servers may require the following deployment tools: SmartStart Scripting Toolkit - Automated scalable deployment utility Smart Components - a self-executable software consisting of driver and firmware With agents and providers, ProLiant 100 series servers get environmental monitoring that is similar and consistent to that of ProLiant 300 series servers and above. This server now offers the HP Insight Management Agents and HP Insight Management WBEM Providers, two well established sets of management and Internet standards technologies that provide capabilities which provide integration to HP Systems Insight Manager (SIM). Form Factor : 1U (1.69" / 4.32 cm) Rack Mount Chassis 27.6" (70.0cm) Deep New fixed mounting rails included with all models Warranty : This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support. (3-1-1 warranty in APJ). Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html QuickSpecs HP ProLiant DL120 Generation 6 Overview DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 2
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core Processors Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3) Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4) Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Xeon® processor HP X3470 (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores are active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed. Dual-Core Processors Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066, HT) Intel® Xeon® processor L3406 (2.28GHz, 30W, 4MB, 1066, HT, Turbo 2/2) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Core⢠processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Core⢠processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Cache Memory Integrated 1x8MB Level3 Intel® Smart Cache Chipset Intel® 3420 Chipset Memory Protection ECC QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 3
Memory One of the following depending on Model Type DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM) Standard (Entry Model) 2GB (1x2GB) UDIMM Standard (Base Models) 2GB (1x2GB) UDIMM Standard (Performance Models) 4GB (2x2GB) RDIMM Maximum Memory Supports up to 16GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB DDR3 800/1066/1333 Registered DIMM. Supports up to 4 UDIMMs or 6 dual rank RDIMMs NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator . Network Controller Embedded NC107i Gigabit Server Adapter Expansion Slots Technology Bus Width *** Connector Width Bus Number * Device No. ** Form Factor Notes 1 (Standard) PCIe G2 X16 x16 0 1 Full length, full height slot 2 (Standard) PCIe G1 X4 x8 0 28 Half height, low profile slot 1 (Optional) PCI-X (133MHz, 3.3Volt) 64-bit N/A 0 1 Full length, full height slot * Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number. ** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus) *** Indicates the number of physical electrical lanes running to a PCI-e connector. Storage Controllers Entry and Base Model HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate: 3Gb/s SATA NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i NOTE: Hot Plug SAS and SATA controllers available via PCI card option. NOTE: Smart Array SAS Controller requires the HP CA ASSY 384SATA to MINI-SAS Kit (P/N 487734-B21) must be ordered. Performance Model HP Smart Array P212/256MB Controller (RAID 0/1/1 0/5/5 0) QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 4
Storage Optical Drive Optional 9.5mm DVD-ROM, or DVD-RW Drive Hard Drives Entry Model Up to 4 non-hot plug SATA/SAS 3.5" drives supported. 1x160GB non hot plug SATA 3.5" drive ships standard NOTE: SAS requires optional HBA or SA card Base Model (Cold Plug) Up to 4 non-hot plug SATA/SAS 3.5" drives supported. None ships standard NOTE: SAS requires optional HBA or SA card. NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i NOTE: Support for additional SAS/SATA hot plug drives requires HP Smart Array Controller. Performance Model (Hot Plug) Up to 4 hot plug SATA/SAS 3.5" drives supported. None ships standard Maximum Internal Storage Type Hot Plug SAS 8.0TB (4 x 2TB) 3.5" SAS Non-Hot Plug SATA 8.0TB (4 x 2TB) 3.5" SATA Interfaces Serial 1 Pointing Device 1 Keyboard 1 Graphics 1 (rear) Network RJ-45 2 USB 2.0 7 (2 front, 1 internal, 4 rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb- support.html Graphics 64MB shared supports all display resolutions up to 1600 x 1200 16bpp @ 75Hz Form Factor Rack (1U), (1.69 in/4.32 cm), 27.56" deep Embedded Manageability HP ProLiant LO100 HP ProLiant Lights-Out 100, simplifies server setup, control, and lights- out remote administration of ProLiant 100 Series servers and functions without additional software. It can be accessed from any location via LAN or Internet and works hand-in-hand with HP Systems Insight Manager (SIM), helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business. Advanced Licenses are required for Virtual KVM and Virtual Media feature activation. Key features of LO100 are: IPMI 2.0 & SMASH CLP support ROM Setup Utility Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD- ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements) Enhanced browser interface and embedded KVM over IP provides QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 5
OS-independent remote graphical console 24x7 Technical Support and Update (TSU) 1 year support and license upgrades included in Advanced license NOTE: For more information, see: http://www.hp.com/go/lo100 HP Insight Control management software Insight Control server deployment HP Insight Control server deployment is a deployment solution for HP ProLiant and Integrity servers hosted on a Windows CMS. It automates the process of deploying and provisioning server software, enabling companies to quickly and easily adapt to changing business demands. Insight Control server deployment includes software optimizations for HP servers, including the HP scripting toolkits, configuration jobs for leading industry-standard operating systems, sample unattended files, and HP server support packs that include software drivers, management agents, and important documentation. Deploying servers can be accomplished either through imaging or through scripting. Insight Control server deployment is hosted on a Windows server and is intended for heterogeneous environments deploying Windows, Linux, VMware ESX and Microsoft Hyper-V systems. Insight Control server deployment includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight . Core Server Management ProLiant 100 Series G6 Core Management Software for ProLiant 100 Series Servers HP provides management solutions that are designed to simplify a server's installation, configuration, and maintenance throughout the entire server lifecycle. This provides the customers with higher levels of operational efficiency and highly reliable systems. While ProLiant 100 series G6 servers do not support the Insight Foundation Suite for ProLiant, they support a key subset of this important suite software tools and utilities which are very suitable for this class of server: SIM, SMH, agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up which greatly simplifies server set- up. Additionally the ProLiant DL100 and SL100 G6 models support the SmartStart Scripting Toolkit (SSSTK), an automated scalable deployment utility. Information on core management supported on ProLiant 100 series G6 servers can be found at these URLS: Core Management: http://www.hp.com/go/coremanagement HP ProLiant 100 series Easy Set-up CDs: www.hp.com/servers/easysetup Core Infrastructure Management HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms. Insight Management Agents HP Insight Management Agents and Insight Management Providers are available for HP Systems Insight Manager (SIM) Integration. ProLiant 100-series G6 servers can use the same SNMP based Insight Management Agents supported by other ProLiant servers. As a result, administrators can use HP Systems Insight Manager (SIM) 5.3 and greater to manage ProLiant 100-series G6 servers. Administrators can also use any other SNMP- based management tool. These agents are obtained as part of the ProLiant 100-series model-specific "Easy Set-up" CDs, or through http://www.hp.com/servers/easysetup The following capabilities are enabled on the 100-series G6 servers by QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 6
the SNMP agents: Health monitoring capabilities, including monitoring for drives, fans, network, power supplies, and temperature Alerting capabilities, including basic alert notification for Smart Array drive pre-failure only Performance monitoring capabilities providing information on processor, memory, disk free space, network utilization For additional information, please see: http://www.hp.com/go/insight Easy Set-up CD Easy Set-up CDs are available on all 100-series G6 servers and are also available as an ISO image web download. HP ProLiant Easy Set- up CDs provide easy, step-by-step, single and multi-server server utilities for the ProLiant 100-series G6 servers to streamline server setup for 100-series G6 servers. The user experience is consistent with SmartStart and offers the following capabilities: Boot environment and GUI Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server. Refer to each server's QuickSpecs for supported versions) HP Insight Diagnostics AutoRun Array Configuration Utility (ACU) has been combined with Array Diagnostics Utility (ADU) to offer both configuration of array controllers and storage devices and testing of array controller hardware SmartStart Scripting Toolkit (SSSTK) and Smart Components for software and drivers for DL100 and SL100 servers NOTE: OS and SW available for Manual Installation are listed on each servers' QuickSpecs. SmartStart Scripting Toolkit (SSSTK) The SmartStart Scripting Toolkit is a server deployment product that delivers an unattended automated installation for high-volume server deployments. The SmartStart Scripting Toolkit includes a set of utilities for configuring and deploying servers in a customized, predictable, and unattended manner. These utilities enable you to duplicate the configuration of a source server on target servers with minimum user interaction. The Toolkit is designed for IT experts with experience in scripting operating system installations and configuring ProLiant server hardware. For additional information, please see: http://h18004.www1.hp.com/products/servers/management/toolkit/ index.html Subscriber's Choice Subscriber's Choice Driver and Support Alerts/Notifications is a web- based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis. ROMPaq, software and latest drivers The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options; downloaded from Software and Drivers download pages website at: http://www.hp.com/go/support and from www.hp.com/servers/easysetup . Contains the following: HP Insight Management Agents for Systems Insight Manager QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 7
(SIM) Integration HP Systems Management Homepage Array Configuration Utility (ACU) Array Diagnostics Utility (ADU) HP Insight Diagnostics Industry Standard Compliance ACPI 3.0a PCI 2.3 Compliant PXE Support WOL Support Microsoft® Logo certifications USB 2.0 IPMI 2.0 DCMI 1.0 Intelligent Manageability HP ProLiant Lights-Out 100 with optional LO100 Advanced Licenses for Virtual KVM and Virtual Media. Embedded IPMI standard reporting Easy Set-up CD and ISO Image Web downloads Array Configuration Utility (ACU) Array Diagnostics Utility (ADU) HP Insight Diagnostics HP Insight Management Agents and Insight Management Providers for Systems Insight Manager (SIM) Integration Security Power-on password Keyboard password USB Port control Removable DVD-ROM Drive Assembly (optional) Dedicated/Shared LO100 management NIC port Administrator's password Security - Trusted Platform Module The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker⢠Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline. NOTE: For more information about TPM, including a white paper, go to www.hp.com/go/TPM NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss. QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 8
Server Power Cords North America One 6' Highline (IEC-IEC) power cord ships standard Japan One 6' Highline (IEC) power cord and one 6' Lowline power cord ship standard ROW One 6' Highline (IEC) power cord ships standard NOTE: HP ProLiant DL120 G6 server ship standard worldwide with a C13 to C14 2M Highline jumper cord. Japanese models also include a 2M Lowline power cord. If customers require a local power cord, they can check the power cord matrix for the appropriate country specific cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix . Power Supply Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant UPS and PDU Power Cord Matrix Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: www.hp.com/products/powercords . System Fans 4 dual rotor fans ship standard. Required Cabling For required cabling information, refer to the Web site at: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-241475- 3579703.html . Operating Systems and Virtualization Software Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/DL120G6 Rack Airflow Requirements Rack 10000 G2 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors : If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side : The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server. QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 9
Rack Kit Quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management. Telco Rack Kit Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to: www.hp.com/go/rackandpower for more information. Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express . HP Enterprise Configurator The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator . Service and Support HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs. HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22-inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack. To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of support solutions provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to help you speedily deploy and maximize system uptime. Recommended Service - simplify ProLiant solution implementation, maintenance, and management. Support - 3-Year 24x7 4 hr Response service support coverage Deployment Service - HW Installation only Enhanced Service - optimize service level to increase IT performance and availability. Support - 3-Year 24x7 24 hr Call to repair service support coverage Support -3-Year 24x7 6 hr Call to repair service support coverage Support Plus -24x7 4 hr Response service support including OS coverage QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 10
Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays. NOTE: For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 11
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Entry Model HP DL120 G6 G6950 NHP SATA 490930-xx1 Processor (1) Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066) Cache Memory 3MB Intel® Smart Cache Memory 2GB (1x2GB) PC3-10600E DDR3 UB ECC Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter Storage Controller HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Hard Drives 1 x 160GB 3.5" Non-hot plug SATA Internal Storage Up to 4 large form factor Non-hot plug SAS/Non-hot plug SATA NOTE: SAS support requires Smart Array Controller and HP CA ASSY 38" 4 SATA to MINI-SAS Kit (P/N 591475-B21). Optical Drive None Ships Standard Power Supply Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant Form Factor 1U Base Model HP DL120 G6 X3430 Pluggable SATA 490931-xx1 Processor (1) Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3) Cache Memory 8MB Intel® Smart Cache Memory 2GB (1x2GB) PC3-10600E DDR3 UB ECC Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter Storage Controller HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Hard Drives None Ships Standard Internal Storage Up to 4 large form factor Hot Plug drives (cold pluggable only) NOTE: Hot Plug support requires HP Smart Array Hot Plug Advance Pack for B110i or Smart Array Controller and HP CA ASSY 38" 4 SATA to MINI-SAS Kit (P/N 591475-B21). Optical Drive None Ships Standard Power Supply Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant Form Factor 1U Performance Model HP DL120 G6 X3450 HP SAS 490932-xx1 Processor (1) Intel® Xeon® processor X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4) Cache Memory 8MB Intel® Smart Cache Memory 4GB (2x2GB) PC3-10600R-9 DDR3 RDIMM Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter Storage Controller HP Smart Array P212/256MB Controller Hard Drives None Ships Standard Internal Storage Up to 4 large form factor Hot Plug drives Optical Drive None Ships Standard Power Supply Autosensing 400-Watt PFC Power Supply, CE Mark Compliant Form Factor 1U Country Code Key xx=00 US xx=29 Japan xx=37 APD (Asia excluding Japan) xx=42 EURO xx=AA PRC QuickSpecs HP ProLiant DL120 Generation 6 Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 12
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: FIO indicates that this option only available as a Factory Installable Option. Step 1: Base Configuration (choose one of the following configurable models) Models HP DL120G6 NHP CTO Chassis 490933-B21 Includes: Embedded NC107i Gigabit Server Adapter 1 full length PCI Express Gen2 x16 slot (x16 connector) and 1 half length low profile PCI Express x4 slot (x8 connector) HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Rack (1U) form factor, (1.7 in/4.32 cm) Fixed, mounting rails HP DL120G6 HP CTO Chassis 583183-B21 Includes: Embedded NC107i Gigabit Server Adapter Hot-Plug drive cage, including cables 1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI Express x4 slot (x8 lane) HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Rack (1U) form factor, (1.7 in/4.32 cm) Fixed, mounting rails Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processor Quad-Core Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3), FIO 581869-L21 Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3), FIO 578471-L21 Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4), FIO 581870-L21 Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5), FIO 578473-L21 Intel® Xeon® processor X3470 processor (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5), FIO 578475-L21 Dual-Core Processors Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066), FIO 599309-L21 Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066), FIO 599308-L21 Intel® Xeon® processor L3406 (2.28GHz, 30W, 4MB, 1066, HT, Turbo 2/2), FIO 611530-L21 Intel® Core⢠processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT), FIO 599310-L21 Intel® Core⢠processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT), FIO 599311-L21 HP Memory Unbuffered with ECC DIMMs (UDIMM) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500668-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21 QuickSpecs HP ProLiant DL120 Generation 6 Configuration Information - Factory Integrated Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 13
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 Registered DIMMs (RDIMM) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit 500660-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator . NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: The below Hard drives can only be selected with the Non-Hot Plug CTO Chassis (P/N 490933-B21) SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 454234-B21 HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417950-B21 HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417855-B21 SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507774-B21 HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507772-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 458941-B21 SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 571232-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 458947-B21 HP Power Supplies HP 400W Power Supply FIO Kit 515739-B21 HP 500W NHP Power Supply Option Kit 583437-B21 Step 3: Choose Additional Options for Factory Integration (only one of the following from each list unless otherwise noted) HP Storage Controllers SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2) HP Smart Array P212/256 MB w/Battery FIO 491191-B21 HP Smart Array P411/256 w/Battery FIO 491193-B21 HP Smart Array P212/256MB Controller 462834-B21 HP Smart Array P212/Zero Memory (ZM) Controller 462828-B21 QuickSpecs HP ProLiant DL120 Generation 6 Configuration Information - Factory Integrated Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 14
Step 4: Choose Additional Factory Integratable Options NOTE: For additional options, please refer to the "Core Options and Additional Options" section below. QuickSpecs HP ProLiant DL120 Generation 6 Configuration Information - Factory Integrated Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 15
NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information. HP Unique Options HP Internal USB Cable G6 Kit NOTE: This option required to connect a USB device internally. 536769-B21 HP Memory Unbuffered with ECC DIMMs (UDIMM) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500668-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21 HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 Registered DIMMs (RDIMM) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit 500660-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator . NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient HP Optical Drives HP 9.5mm SATA DVD-ROM Optical Drive 481045-B21 HP 9.5mm SATA DVD RW Optical Drive 481047-B21 HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516828-B21 HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516816-B21 HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 454232-B21 HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516814-B21 HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 416127-B21 HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 384854-B21 SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 507616-B21 HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 507614-B21 HP 1TB 3G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 461137-B21 QuickSpecs HP ProLiant DL120 Generation 6 Core Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 16
HP 750GB 3G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 461135-B21 SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 516830-B21 HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 516826-B21 HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 454234-B21 HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417950-B21 HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417855-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive 507632-B21 HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive 454146-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive 458928-B21 SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507774-B21 HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507772-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 458941-B21 SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive 571230-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive 458945-B21 SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 571232-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 458947-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html (Worldwide) QuickSpecs HP ProLiant DL120 Generation 6 Core Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 17
HP Networking HP NC112T PCI Express Gigabit Server Adapter 503746-B21 HP NC360T PCI Express Dual Port Gigabit Server Adapter 412648-B21 HP NC364T PCI Express Quad Port Gigabit Server Adapter 435508-B21 HP NC365T 4-port Ethernet Server Adapter 593722-B21 HP NC373F PCI Express Multifunction Gigabit Server Adapter 394793-B21 HP NC373T PCI Express Multifunction Gigabit Server Adapter 394791-B21 HP NC375T PCI Express Quad Port Gigabit Server Adapter 538696-B21 HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs HP I/O Expansion Options HP 1U PCI-X Riser Option Kit NOTE: For PCI-X Card support only. NOTE: The PCI-X Riser option is available to convert the full-length, full-height PCI-Express slot to PCI-X slot for PCI-X cards only. 516230-B21 HP Power Supplies HP 500W NHP Power Supply Option Kit 583437-B21 QuickSpecs HP ProLiant DL120 Generation 6 Core Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 18
Entry-Level Server Management HP LO100i Advanced Pack License, including 1 year of 24x7 Technical Support and Updates, Electronic NOTE: Electronic LTUs are only available through limited points of sales; if not available, order a printed license entitlement certificate (xxxxxx-B2x) instead. TA859AAE HP Insight Software HP Insight Control server deployment HP Insight Control server deployment, Electronic License including 1 year of 24x7 Technical Support and Updates T9082AAE HP Insight Control server deployment , No Media, 1-Server License, including 1 year of 24x7 Technical Support and Updates 452151-B21 NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single activation key. NOTE: Electronic software is available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. NOTE: Licenses ship without media. The Insight Software Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightcontrol (click on Download button). NOTE: For additional license options please see the Insight Control QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html HP Security-TPM HP Trusted Platform Module Option Kit 488069-B21 HP Storage Controllers SAS Controllers Smart Array P212 Controller HP Smart Array P212/Zero Memory Controller 462828-B21 HP Smart Array P212/256 MB Controller 462834-B21 Smart Array P411 Controller HP Smart Array P411/256 MB Controller 462830-B21 HP Smart Array P411/512 MB Battery Backed Write Cache 462832-B21 Optional Upgrades 1G Flash Backed Write Cache 534562-B21 512MB Flash Backed Write Cache 534916-B21 HP Smart Array P411/1G Flash Backed Write Cache 572531-B21 HP Smart Array P411/512MB Flash Backed Write Cache 578229-B21 256 MB Cache Module NOTE: Supported on HP Smart Array P212 Controller only. 462968-B21 512MB BBWC NOTE: Supported on HP Smart Array P411 Controller only. 462967-B21 Battery Kit upgrade NOTE: To enable BBWC on the 256MB cache. NOTE: Supported on HP Smart Array P212 Controller, and HP Smart Array P411only. 462969-B21 HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7 Technical Support NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). 516471-B21 QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 19
Include one year of 24x7 HP Software Technical Support Services. HP CA ASSY 38" 4 SATA to MINI-SAS Kit 591475-B21 SCSI HBA HP SC11Xe Host Bus Adapter 412911-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html (Smart Array P411 Controller) http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html (Smart Array Advanced Pack) http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA) HP Backup & Recovery Software Data Protector Express HP Data Protector Express 4.0 SP1 Backup Server BB117BA HP Data Protector Express 4.0 SP1 for Microsoft Small Business Server BB118BA HP Data Protector Express Backup Server 4.0 SP1 Upgrade from Data Protector Express Single Server Edition BB117BT NOTE: Only one of these Data Protector Express base products is required. To see available options: http://www.hp.com/go/dataprotectorexpress HP Tape Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect . HP StorageWorks DAT 160 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. Q1587A HP StorageWorks 1U USB Rack-Mount Kit with one DAT 320 USB Tape Drive AP835A HP StorageWorks DAT 320 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. AJ830A HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. DW085A HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. EH847A HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using the HP SC44Ge SAS Host Bus Adapter (416096- B21) recommended. AH558A HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. AH559A QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 20
HP Disk Backup NOTE: For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP StorageWorks disk backup products see: http://www.hp.com/go/connect . HP StorageWorks D2D Backup Systems with Backup Data Deduplication HP StorageWorks D2D2502i Backup System NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. EJ001B HP StorageWorks D2D2504i Backup System NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. USB Removable Media RDX Disk Backup Systems EJ002B USB Removable Media RDX Disk Backup Systems HP StorageWorks RDX320 Internal Removable Disk Backup System NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 320GB of disk capacity per data cartridge. AJ767A HP StorageWorks RDX500 Internal Removable Disk Backup System NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 500GB of disk capacity per data cartridge. AJ934A HP StorageWorks RDX750 Internal Removable Disk Backup System NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 750GB of disk capacity per data cartridge. AW577A HP Uninterruptible Power Systems HP Rack-mountable UPS HP UPS R1500 G2 HP, R1.5kVA UPS, 1U, NA AF419A HP, R1.5kVA UPS, 1U, INTL AF418A HP, R1.5kVA UPS, 1U, JPN/TW AF421A NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12507_div/12507_div.html (Worldwide) HP R/T3000 UPS HP R/T3000 UPS, High voltage, NA/JPN AF453A HP R/T3000 UPS, High voltage, detachable inlet cord INTL AF454A NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/10671_div/10671_div.html (Worldwide) HP Rack-Mountable R5500 UPS HP R5500 VA UPS, INTL AF416A HP R5500 VA UPS, NA/JPN AF426A QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 21
NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11871_div/11871_div.html (Worldwide) HP Power Distribution Units HP Monitored Power Distribution Unit: Full Rack Version HP 8.6 kVA S1324 Monitored PDU- single input, 3Ã, 24A (NA/JPN) AF504A HP 8.3 S1140 Monitored PDU- single input, 1Ã, 40A (NA/JPN) AF506A HP 11 kVA S1316 Monitored PDU- single input, 3Ã, 16A (INTL) AF508A HP 7.3 kVA S1132 Monitored PDU- single input, 1Ã, 32A (INTL) AF510A HP Monitored Power Distribution Unit: Half Rack Version HP 4.9 kVA S124 Monitored PDU- single input, 1Ã, 24A (NA/JPN) AF914A HP 7.3 kVA S132 Monitored PDU- single input, 1Ã, 32A (INTL) AF915A Modular Power Distribution Units 1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and 9000 series racks). HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC) (NA, Japan) 252663-D72 HP Modular Power Distribution Units (mPDU), High Voltage 8.3 kVA Modular PDU, 40A, NA/JPN 252663-D73 HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l) 252663-B31 HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW) NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements. 252663-B24 NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs for additional options including shorter jumper cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html (Worldwide) NOTE: For additional information on HP Power Distribution Units including accessories please go to: www.hp.com/go/pdu . HP Rack Series 10642 G2 (42U) Rack Cabinet - Pallet AF001A 10642 G2 (42U) Rack Cabinet - Shock Pallet AF002A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower . QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 22
HP Rack Options HP KVM Switch Options HP 0x2x16 KVM SVR CNSL G2 VM CAC SW AF618A HP 0x2x32 KVM SVR CNSL G2 VM CAC SW AF619A HP 1x1Ex8 KVM IP CNSL G2 VM CAC SW AF620A HP 2x1Ex16 KVM IP CNSL G2 VM CAC SW AF621A HP 4x1Ex32 KVM IP CNSL G2 VM CAC SW AF622A HP Serial Console Server Options Server console switch 0x2x8 AF616A Server console switch 0x2x16 AF617A NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm . NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm . HP Care Pack Services Hardware Services On-site Service 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic UJ252E 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic UJ253E Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic UJ251E Installation Services Hardware Services 6-Hour Call to Repair On-Site Service UJ254E Hardware Installation, Electronic UJ261E NOTE: For more information, customer/resellers can contact: http://www.hp.com/hps/ QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 23
HP ProLiant DL120 G6 Models NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory SATA Models: 4GB of PC3-10600E DDR3 UDIMM running at 1333MHz with ECC capabilities memory installed. SAS Models 4GB of PC3-10600R RDIMM running at 1333MHz Standard Memory Plus Optional Memory Up to 16 GB memory is available with the optional installation of 4 x 4GB PC3-10600E UDIMM ECC DDR3 SDRAM DIMM Memory kits. Up to 12GB memory is available with the optional installation of 6 x 2GB PC3-10600R RDIMM DDR3 SDRAM DIMM Memory kits Up to 16 GB memory is available with the optional installation of 4 x 4GB PC3-8500R RDIMM DDR3 DIMM Memory kits. NOTE: The below chart does not represent all possible memory configurations. NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1 and 3 are interleaving pair. Slots 2 and 4 are interleaving pair). Some DIMM installation guidelines are summarized below: For the HP ProLiant DL120 G6 server with six (6) memory slots There are two (2) channels per server There are three (3) DIMM slots for each memory channel; six (6) total slots Memory channel 1 consists of the three (3) DIMMs that are closest to the processor Memory channel 2 consists of the three (3) DIMMs that are furthest from the processor Different processor (CPU) has different memory support Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs) It is not required, but it is recommended to load the channels similarly if possible Support up to 4 DIMMs (2 DIMMs per channel) max 8GB PC3 10600E (DDR3 1333 MHz) Support up to 4 DIMMs ( 2 DIMMs per channel) max 16GB PC3-8500R (DDR3-1066 MHz) Support up to 6 DIMMs (3 DIMMs per channel) max 12GB PC3-10600R (DDR3-1333 MHz). Support single, double and quad ranks of DIMM Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the CPU No mixing DIMM voltage; all DIMMs must be the same voltage The UDIMM installing sequence: DIMM1E DIMM2C DIMM3A DIMM4F DIMM5D DIMM6B 1 DIMMs Empty Empty DIMM Empty Empty Empty 2 DIMMs Empty Empty DIMM Empty Empty DIMM 4 DIMMs Empty DIMM DIMM Empty DIMM DIMM The RDIMM installing sequence: DIMM1E DIMM2C DIMM3A DIMM4F DIMM5D DIMM6B 1 DIMMs Empty Empty DIMM Empty Empty Empty 2 DIMMs Empty Empty DIMM Empty Empty DIMM 4 DIMMs Empty DIMM DIMM Empty DIMM DIMM 6 DIMMs DIMM DIMM DIMM DIMM DIMM DIMM QuickSpecs HP ProLiant DL120 Generation 6 Memory DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 24
Following are memory options available from HP: HP Memory Unbuffered with ECC DIMMs (UDIMM) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500668-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21 HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 Registered DIMMs (RDIMM) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit 500660-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator . NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant energy efficient features, see: www.hp.com/go/proliant-energy-efficient QuickSpecs HP ProLiant DL120 Generation 6 Memory DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 25
1- 4 Four SATA or SAS drive bays A Optical Drive Bay: Optional DVD-ROM, or DVD-RW drive Drive Support Quantity Supported Position Supported Controller Removable Media 9.5mm IDE DVD-ROM or DVD-RW Drive Up to 1 A HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives Quantity Supported Position Supported Controller 600GB 6G SAS 15K DP 450GB 6G SAS 15K DP 450GB 3G SAS 15K DP 300GB 6G SAS 15K DP 300GB 3G SAS 15K DP 146GB 3G SAS 15K DP Up to 4 1-4 HP Smart Array P212 Controller NOTE: Support for transfer rates up to 3 Gb/s SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 1TB 3G SAS 7.2K DP 750GB 3G SAS 15K DP Up to 4 1-4 HP Smart Array P212 Controller NOTE: Support for transfer rates up to 3 Gb/s SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives Quantity Supported Position Supported Controller 600GB 6G SAS 15K DP 450GB 6G SAS 15K DP 450GB 3G SAS 15K DP 300GB 3G SAS 15K DP 146GB 3G SAS 15K DP Up to 4 1-4 HP Smart Array P212 Controller NOTE: Support for transfer rates up to 3 Gb/s QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 26
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 2TB 3G SATA 7.2K 1TB 3G SATA 7.2K 750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 2TB 3G SATA 7.2K 1TB 3G SATA 7.2K 500GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives Quantity Supported Position Supported Controller 250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives Quantity Supported Position Supported Controller 250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Non-Hot Plug LFF (3.5-inch) Drives Quantity Supported Position Supported Controller 250GB 1.5G SATA 7.2K 160GB 1.5G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA Maximum Storage Capacity - (SAS drives) Internal 8.0TB (4 x 2TB SAS) External 28.0TB (1 x (14 x 2TB SAS)) Total 36.0TB Maximum Storage Capacity - (SATA Drives) Internal 8.0TB (4 x 2TB SATA) External 24.0TB [1 x (12 x 2TGB SATA)] Total 32.0TB NOTE: In order to implement integrated SATA RAID with Easy 'set-up CD' on Windows 2000/2003, the use of a floppy drive is necessary. Tape and Disk Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape . For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP StorageWorks disk and tape backup products see: http://www.hp.com/go/connect . Position Recommended Controller Part Number HP StorageWorks SCSI Tape Drives External HP SC11Xe Host Bus Adapter 412911-B21 QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 27
LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 1U Rack-Mount Kit 3U Rack-Mount Kit Please check the full compatibility information at: http://www.hp.com/go/connect HP StorageWorks USB Tape Drives DAT 40 DAT 72 DAT 160 DAT 320 1U USB Rack-Mount Kit External USB 2.0 Port N/A HP StorageWorks SAS Tape Drives DAT 160 DAT 320 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-4 Ultrium 1760 LTO-4 Ultrium 1840 LTO-5 Ultrium 3000 LTO-5 Ultrium 3280 1U Rack-Mount Kit 3U Rack-Mount Kit External HP Smart Array P212 SAS controller Please check the full compatibility information at: http://www.hp.com/go/connect 462828-B21 HP StorageWorks SCSI Tape Autoloaders DAT 72x10 Autoloader 1/8 G2 Autoloader External HP SC11Xe Host Bus Adapter Please check the full compatibility information at: http://www.hp.com/go/connect 412911-B21 HP StorageWorks SCSI Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 External HP U320e SCSI Dual Channel Controller Please check the full compatibility information at: http://www.hp.com/go/connect AH627A HP StorageWorks SAS Tape Autoloaders and Libraries 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096 External HP Smart Array P212 SAS controller Please check the full compatibility information at: http://www.hp.com/go/connect 462828-B21 QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 28
HP StorageWorks Fibre Channel Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for connectivity information and the supported Fibre Channel HBAs shown in this QuickSpecs. HP StorageWorks USB RDX Removable Disk Backup System RDX160 RDX320 RDX500 RDX750 External USB 2.0 port N/A HP StorageWorks D2D Backup Systems, iSCSI D2D2500i D2D4000i External Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. HP StorageWorks D2D Backup Systems, Fibre Channel D2D4000fc External Direct server attach is not supported, requires connection via SAN fabric. See: http://www.hp.com/go/connect QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 29
System Unit Dimensions (H x W x D) (with bezel) 4.32 x 44.81 x 70.0 mm (1.69" x 17.64" x 27.56") Weight (approximate) Maximum (four hard drives, power supply, and processor installed) 31.49 lb (14.3kg) Minimum (one hard drive, power supply, and processor installed) 28.2lb (12.8kg) Input Requirements (per power supply) Range Line Voltage 90 - 132 VAC, 180 - 264 VAC Rated Input Current 6 A (at 100 VAC), 3 A (at 200 VAC) Rated Input Frequency 47 to 63 Hz Rated Input Power <550W (at 100 VAC) 550W (at 200 VAC) BTU Rating Maximum 1314 BTU/hr (at 100 VAC), 1314 BTU/hr (at 200 VAC) Power Specifications To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant- energy-efficient or www.hp.com/go/hppoweradvisor - Click on the system of interest. Example: DL120 G6 - Follow the instructions of the next screens. Power Supply Output (per power supply) Rated Steady-State Power 400 W (at 100 VAC), 400 W (at 200 VAC) Maximum Peak Power 430 W (at 100 VAC), 430 W (at 200 VAC) System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F). Non-operating -30° to 65°C (-22° to 149°F). Maximum rate of change is 20°C/hr (36°F/hr). Relative Humidity (non-condensing) Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non- condensing. Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. Altitude Operating 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 30
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle LWAd 6.30 B LpAm 44.1 dBA Operating LWAd 6.34 B LpAm 44.4 dBA Emissions Classification (EMC) FCC Rating Class A Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. Power Supply Input voltage specifications Rated input voltage 100 VAC to 240 VAC Input Specifications Rated input line 90 VAC to 264VAC Frequency range 47 to 63 Hz Rated input power @ 115V input, Rated input power = 500W (assume output wattage=400W @ 230V input, Rated input power = 500W (assume output wattage=400W) Rated input current 6 A, 3 A (110 V, 220 V) Steady state power 400W (rated) BTU Rating 1710 BTU/hr Ambient temperature range Operating 41° to 122° F (5° to 50° C) Non-operating -40° to 167° F (-40° to 75° C) Relative humidity (non-condensing) Operating 5% to 95% Non-operating 5% to 95% Dielectric voltage withstand Input to output 2150 VDC minimum, withstand 1 min Input to ground 2150 VDC minimum, withstand 1 min Maximum Wet Bulb Temperature 104° F (40° C) QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 31
Integrated Serial ATA Controller Simultaneous drive transfer channels 4 channels Transfer rate synchronous (maximum theoretical) 150 MB/s per channel; 300 MB/s in RAID 0 pair Data transfer method Intel® 82801IR Integrated Serial ATA Host Controller (non-RAID mode) Intel® 82801IR Integrated Serial ATA Host Controller (RAID Mode) Drive support Serial ATA Data transfer modes Legacy Mode Combined Mode Protocol Serial ATA Feature NCQ (Native Command Queuing); AHCI (Advanced Host Controller Interface) RAID levels supported 0, 1 RAID Features Supports multiple logical volumes Setup through ROM based Array Configuration Utility Installation scripting support NOTE: This controller does not support Hot Plug functions or LED functions. RAID OS Support Microsoft Windows Server 2003 NOTE: In order to implement integrated SATA RAID with Smart Start 7.90 on Windows 2000/2003, the use of a floppy drive is necessary. Linux (Red Hat, SuSE, UnitedLinux) Embedded HP NC107i PCIe Gigabit Server Adapter Network Interface 10Base-T/ 100Base-TX/ 1000Base-TX Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver. Compatibility IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.3u 100Base-TX Data Transfer Method Four lane (x4), 100MHz PCI Express Reference Clock Controller BCM5723 Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s 10Base-T (Full-Duplex) 20 Mb/s 100Base-TX (Half- Duplex) 100 Mb/s 100Base-TX (Full- Duplex) 200 Mb/s 1000Base-TX (Half and Full-Duplex) 2000Mb/s Connector RJ-45 connector Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m) 10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m) QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 32
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 458947-B21 Capacity 160,041MB Height Maximum drive dimension 1.028 in. (26.1 mm) Width 4.00 in (101.6 mm) Depth Maximum drive dimension 5.787 in (147.0 mm) Interface Serial ATA Transfer Rate (Maximum) 3Gb/s Native Command Queuing Supported Seek Time (typical reads, including settling) Single Track 2.0 ms Average <11 ms Full-Stroke 22.0 ms Rotational Speed 7,200 rpm Physical Configuration Bytes/Sector 512 Logical Blocks 312,581,808 Operating Temperature (system inlet air temperature) 50° to 95° F (10° to 35° C) Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. © Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less. QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 33
NOTE: Transfer rate: 3Gb/s SATA NOTE: Available upgrade: HP Smart Array Hot Plug Advance Pack for B110i Performance Model: HP Smart Array P212/256MB Controller (RAID 0/1/1 0/5/5 0) NOTE: Available upgrades: Battery Kit upgrade (for BBWC), and Smart Array Advanced Pack (SAAP) Internal Drive Support : Up to 4 LFF SATA/SAS HDD drive bays (1) Optional slim 9.5mm DVD-ROM or DVD RW Network Controller : Embedded HP NC107i PCI Express Gigabit Server Adapter Expansion Slots : Two total slots: (1) Full length PCI Express Gen 2 x16 slot (x16 connector) (1) Half-length, low-profile PCI Express x4 slot (x8 connector) Optional (1) PCI-X 1 x1 (x4 connector) USB 2.0 Ports : Up to 7 Total: (2) front; (1) internal; (4) rear accessible ports Internal USB port (optional) for flexible storage, security, or USB drive key deployment Infrastructure Management : HP ProLiant Lights-Out 100 simplifies server setup, health monitoring, control, and Lights-Out 100 remote administration. Can be upgraded with a Lights-Out 100 Advanced License for Virtual KVM (remote graphical console) and Virtual Media. With G6, ProLiant 100-series server administrators are able to deploy and monitor their servers using methods similar to 300 series servers and above. Agents and the Easy Set-up CD are available that provide a user experiences consistent with 300 series and above. With Easy Set-up CD, customers get SmartStart "like" deployment tools that reduce the time required for server setup and updates. Easy Set-up CDs and their ISO images are provided with each ProLiant G6 100-series server and are used to perform assisted installations for one or two servers. Users performing multi-server installations involving large numbers of servers may require the following deployment tools: SmartStart Scripting Toolkit - Automated scalable deployment utility Smart Components - a self-executable software consisting of driver and firmware With agents and providers, ProLiant 100 series servers get environmental monitoring that is similar and consistent to that of ProLiant 300 series servers and above. This server now offers the HP Insight Management Agents and HP Insight Management WBEM Providers, two well established sets of management and Internet standards technologies that provide capabilities which provide integration to HP Systems Insight Manager (SIM). Form Factor : 1U (1.69" / 4.32 cm) Rack Mount Chassis 27.6" (70.0cm) Deep New fixed mounting rails included with all models Warranty : This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support. (3-1-1 warranty in APJ). Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html QuickSpecs HP ProLiant DL120 Generation 6 Overview DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 2
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core Processors Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3) Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4) Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Xeon® processor HP X3470 (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores are active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed. Dual-Core Processors Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066, HT) Intel® Xeon® processor L3406 (2.28GHz, 30W, 4MB, 1066, HT, Turbo 2/2) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Core⢠processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Core⢠processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Cache Memory Integrated 1x8MB Level3 Intel® Smart Cache Chipset Intel® 3420 Chipset Memory Protection ECC QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 3
Memory One of the following depending on Model Type DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM) Standard (Entry Model) 2GB (1x2GB) UDIMM Standard (Base Models) 2GB (1x2GB) UDIMM Standard (Performance Models) 4GB (2x2GB) RDIMM Maximum Memory Supports up to 16GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB DDR3 800/1066/1333 Registered DIMM. Supports up to 4 UDIMMs or 6 dual rank RDIMMs NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator . Network Controller Embedded NC107i Gigabit Server Adapter Expansion Slots Technology Bus Width *** Connector Width Bus Number * Device No. ** Form Factor Notes 1 (Standard) PCIe G2 X16 x16 0 1 Full length, full height slot 2 (Standard) PCIe G1 X4 x8 0 28 Half height, low profile slot 1 (Optional) PCI-X (133MHz, 3.3Volt) 64-bit N/A 0 1 Full length, full height slot * Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number. ** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus) *** Indicates the number of physical electrical lanes running to a PCI-e connector. Storage Controllers Entry and Base Model HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate: 3Gb/s SATA NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i NOTE: Hot Plug SAS and SATA controllers available via PCI card option. NOTE: Smart Array SAS Controller requires the HP CA ASSY 384SATA to MINI-SAS Kit (P/N 487734-B21) must be ordered. Performance Model HP Smart Array P212/256MB Controller (RAID 0/1/1 0/5/5 0) QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 4
Storage Optical Drive Optional 9.5mm DVD-ROM, or DVD-RW Drive Hard Drives Entry Model Up to 4 non-hot plug SATA/SAS 3.5" drives supported. 1x160GB non hot plug SATA 3.5" drive ships standard NOTE: SAS requires optional HBA or SA card Base Model (Cold Plug) Up to 4 non-hot plug SATA/SAS 3.5" drives supported. None ships standard NOTE: SAS requires optional HBA or SA card. NOTE: SATA Hot Plug available via Hot Plug Advance Pack for B110i NOTE: Support for additional SAS/SATA hot plug drives requires HP Smart Array Controller. Performance Model (Hot Plug) Up to 4 hot plug SATA/SAS 3.5" drives supported. None ships standard Maximum Internal Storage Type Hot Plug SAS 8.0TB (4 x 2TB) 3.5" SAS Non-Hot Plug SATA 8.0TB (4 x 2TB) 3.5" SATA Interfaces Serial 1 Pointing Device 1 Keyboard 1 Graphics 1 (rear) Network RJ-45 2 USB 2.0 7 (2 front, 1 internal, 4 rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb- support.html Graphics 64MB shared supports all display resolutions up to 1600 x 1200 16bpp @ 75Hz Form Factor Rack (1U), (1.69 in/4.32 cm), 27.56" deep Embedded Manageability HP ProLiant LO100 HP ProLiant Lights-Out 100, simplifies server setup, control, and lights- out remote administration of ProLiant 100 Series servers and functions without additional software. It can be accessed from any location via LAN or Internet and works hand-in-hand with HP Systems Insight Manager (SIM), helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business. Advanced Licenses are required for Virtual KVM and Virtual Media feature activation. Key features of LO100 are: IPMI 2.0 & SMASH CLP support ROM Setup Utility Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD- ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements) Enhanced browser interface and embedded KVM over IP provides QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 5
OS-independent remote graphical console 24x7 Technical Support and Update (TSU) 1 year support and license upgrades included in Advanced license NOTE: For more information, see: http://www.hp.com/go/lo100 HP Insight Control management software Insight Control server deployment HP Insight Control server deployment is a deployment solution for HP ProLiant and Integrity servers hosted on a Windows CMS. It automates the process of deploying and provisioning server software, enabling companies to quickly and easily adapt to changing business demands. Insight Control server deployment includes software optimizations for HP servers, including the HP scripting toolkits, configuration jobs for leading industry-standard operating systems, sample unattended files, and HP server support packs that include software drivers, management agents, and important documentation. Deploying servers can be accomplished either through imaging or through scripting. Insight Control server deployment is hosted on a Windows server and is intended for heterogeneous environments deploying Windows, Linux, VMware ESX and Microsoft Hyper-V systems. Insight Control server deployment includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight . Core Server Management ProLiant 100 Series G6 Core Management Software for ProLiant 100 Series Servers HP provides management solutions that are designed to simplify a server's installation, configuration, and maintenance throughout the entire server lifecycle. This provides the customers with higher levels of operational efficiency and highly reliable systems. While ProLiant 100 series G6 servers do not support the Insight Foundation Suite for ProLiant, they support a key subset of this important suite software tools and utilities which are very suitable for this class of server: SIM, SMH, agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up which greatly simplifies server set- up. Additionally the ProLiant DL100 and SL100 G6 models support the SmartStart Scripting Toolkit (SSSTK), an automated scalable deployment utility. Information on core management supported on ProLiant 100 series G6 servers can be found at these URLS: Core Management: http://www.hp.com/go/coremanagement HP ProLiant 100 series Easy Set-up CDs: www.hp.com/servers/easysetup Core Infrastructure Management HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms. Insight Management Agents HP Insight Management Agents and Insight Management Providers are available for HP Systems Insight Manager (SIM) Integration. ProLiant 100-series G6 servers can use the same SNMP based Insight Management Agents supported by other ProLiant servers. As a result, administrators can use HP Systems Insight Manager (SIM) 5.3 and greater to manage ProLiant 100-series G6 servers. Administrators can also use any other SNMP- based management tool. These agents are obtained as part of the ProLiant 100-series model-specific "Easy Set-up" CDs, or through http://www.hp.com/servers/easysetup The following capabilities are enabled on the 100-series G6 servers by QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 6
the SNMP agents: Health monitoring capabilities, including monitoring for drives, fans, network, power supplies, and temperature Alerting capabilities, including basic alert notification for Smart Array drive pre-failure only Performance monitoring capabilities providing information on processor, memory, disk free space, network utilization For additional information, please see: http://www.hp.com/go/insight Easy Set-up CD Easy Set-up CDs are available on all 100-series G6 servers and are also available as an ISO image web download. HP ProLiant Easy Set- up CDs provide easy, step-by-step, single and multi-server server utilities for the ProLiant 100-series G6 servers to streamline server setup for 100-series G6 servers. The user experience is consistent with SmartStart and offers the following capabilities: Boot environment and GUI Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server. Refer to each server's QuickSpecs for supported versions) HP Insight Diagnostics AutoRun Array Configuration Utility (ACU) has been combined with Array Diagnostics Utility (ADU) to offer both configuration of array controllers and storage devices and testing of array controller hardware SmartStart Scripting Toolkit (SSSTK) and Smart Components for software and drivers for DL100 and SL100 servers NOTE: OS and SW available for Manual Installation are listed on each servers' QuickSpecs. SmartStart Scripting Toolkit (SSSTK) The SmartStart Scripting Toolkit is a server deployment product that delivers an unattended automated installation for high-volume server deployments. The SmartStart Scripting Toolkit includes a set of utilities for configuring and deploying servers in a customized, predictable, and unattended manner. These utilities enable you to duplicate the configuration of a source server on target servers with minimum user interaction. The Toolkit is designed for IT experts with experience in scripting operating system installations and configuring ProLiant server hardware. For additional information, please see: http://h18004.www1.hp.com/products/servers/management/toolkit/ index.html Subscriber's Choice Subscriber's Choice Driver and Support Alerts/Notifications is a web- based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis. ROMPaq, software and latest drivers The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options; downloaded from Software and Drivers download pages website at: http://www.hp.com/go/support and from www.hp.com/servers/easysetup . Contains the following: HP Insight Management Agents for Systems Insight Manager QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 7
(SIM) Integration HP Systems Management Homepage Array Configuration Utility (ACU) Array Diagnostics Utility (ADU) HP Insight Diagnostics Industry Standard Compliance ACPI 3.0a PCI 2.3 Compliant PXE Support WOL Support Microsoft® Logo certifications USB 2.0 IPMI 2.0 DCMI 1.0 Intelligent Manageability HP ProLiant Lights-Out 100 with optional LO100 Advanced Licenses for Virtual KVM and Virtual Media. Embedded IPMI standard reporting Easy Set-up CD and ISO Image Web downloads Array Configuration Utility (ACU) Array Diagnostics Utility (ADU) HP Insight Diagnostics HP Insight Management Agents and Insight Management Providers for Systems Insight Manager (SIM) Integration Security Power-on password Keyboard password USB Port control Removable DVD-ROM Drive Assembly (optional) Dedicated/Shared LO100 management NIC port Administrator's password Security - Trusted Platform Module The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker⢠Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline. NOTE: For more information about TPM, including a white paper, go to www.hp.com/go/TPM NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss. QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 8
Server Power Cords North America One 6' Highline (IEC-IEC) power cord ships standard Japan One 6' Highline (IEC) power cord and one 6' Lowline power cord ship standard ROW One 6' Highline (IEC) power cord ships standard NOTE: HP ProLiant DL120 G6 server ship standard worldwide with a C13 to C14 2M Highline jumper cord. Japanese models also include a 2M Lowline power cord. If customers require a local power cord, they can check the power cord matrix for the appropriate country specific cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix . Power Supply Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant UPS and PDU Power Cord Matrix Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: www.hp.com/products/powercords . System Fans 4 dual rotor fans ship standard. Required Cabling For required cabling information, refer to the Web site at: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-241475- 3579703.html . Operating Systems and Virtualization Software Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/DL120G6 Rack Airflow Requirements Rack 10000 G2 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors : If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side : The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server. QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 9
Rack Kit Quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management. Telco Rack Kit Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to: www.hp.com/go/rackandpower for more information. Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express . HP Enterprise Configurator The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator . Service and Support HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs. HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22-inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack. To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of support solutions provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to help you speedily deploy and maximize system uptime. Recommended Service - simplify ProLiant solution implementation, maintenance, and management. Support - 3-Year 24x7 4 hr Response service support coverage Deployment Service - HW Installation only Enhanced Service - optimize service level to increase IT performance and availability. Support - 3-Year 24x7 24 hr Call to repair service support coverage Support -3-Year 24x7 6 hr Call to repair service support coverage Support Plus -24x7 4 hr Response service support including OS coverage QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 10
Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays. NOTE: For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html QuickSpecs HP ProLiant DL120 Generation 6 Standard Features DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 11
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Entry Model HP DL120 G6 G6950 NHP SATA 490930-xx1 Processor (1) Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066) Cache Memory 3MB Intel® Smart Cache Memory 2GB (1x2GB) PC3-10600E DDR3 UB ECC Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter Storage Controller HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Hard Drives 1 x 160GB 3.5" Non-hot plug SATA Internal Storage Up to 4 large form factor Non-hot plug SAS/Non-hot plug SATA NOTE: SAS support requires Smart Array Controller and HP CA ASSY 38" 4 SATA to MINI-SAS Kit (P/N 591475-B21). Optical Drive None Ships Standard Power Supply Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant Form Factor 1U Base Model HP DL120 G6 X3430 Pluggable SATA 490931-xx1 Processor (1) Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3) Cache Memory 8MB Intel® Smart Cache Memory 2GB (1x2GB) PC3-10600E DDR3 UB ECC Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter Storage Controller HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Hard Drives None Ships Standard Internal Storage Up to 4 large form factor Hot Plug drives (cold pluggable only) NOTE: Hot Plug support requires HP Smart Array Hot Plug Advance Pack for B110i or Smart Array Controller and HP CA ASSY 38" 4 SATA to MINI-SAS Kit (P/N 591475-B21). Optical Drive None Ships Standard Power Supply Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant Form Factor 1U Performance Model HP DL120 G6 X3450 HP SAS 490932-xx1 Processor (1) Intel® Xeon® processor X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4) Cache Memory 8MB Intel® Smart Cache Memory 4GB (2x2GB) PC3-10600R-9 DDR3 RDIMM Network Controller Embedded HP NC107i PCI Express Gigabit Server Adapter Storage Controller HP Smart Array P212/256MB Controller Hard Drives None Ships Standard Internal Storage Up to 4 large form factor Hot Plug drives Optical Drive None Ships Standard Power Supply Autosensing 400-Watt PFC Power Supply, CE Mark Compliant Form Factor 1U Country Code Key xx=00 US xx=29 Japan xx=37 APD (Asia excluding Japan) xx=42 EURO xx=AA PRC QuickSpecs HP ProLiant DL120 Generation 6 Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 12
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: FIO indicates that this option only available as a Factory Installable Option. Step 1: Base Configuration (choose one of the following configurable models) Models HP DL120G6 NHP CTO Chassis 490933-B21 Includes: Embedded NC107i Gigabit Server Adapter 1 full length PCI Express Gen2 x16 slot (x16 connector) and 1 half length low profile PCI Express x4 slot (x8 connector) HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Rack (1U) form factor, (1.7 in/4.32 cm) Fixed, mounting rails HP DL120G6 HP CTO Chassis 583183-B21 Includes: Embedded NC107i Gigabit Server Adapter Hot-Plug drive cage, including cables 1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI Express x4 slot (x8 lane) HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) Rack (1U) form factor, (1.7 in/4.32 cm) Fixed, mounting rails Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processor Quad-Core Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3), FIO 581869-L21 Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3), FIO 578471-L21 Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4), FIO 581870-L21 Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5), FIO 578473-L21 Intel® Xeon® processor X3470 processor (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5), FIO 578475-L21 Dual-Core Processors Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066), FIO 599309-L21 Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066), FIO 599308-L21 Intel® Xeon® processor L3406 (2.28GHz, 30W, 4MB, 1066, HT, Turbo 2/2), FIO 611530-L21 Intel® Core⢠processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT), FIO 599310-L21 Intel® Core⢠processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT), FIO 599311-L21 HP Memory Unbuffered with ECC DIMMs (UDIMM) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500668-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21 QuickSpecs HP ProLiant DL120 Generation 6 Configuration Information - Factory Integrated Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 13
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 Registered DIMMs (RDIMM) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit 500660-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator . NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: The below Hard drives can only be selected with the Non-Hot Plug CTO Chassis (P/N 490933-B21) SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 454234-B21 HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417950-B21 HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417855-B21 SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507774-B21 HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507772-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 458941-B21 SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 571232-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 458947-B21 HP Power Supplies HP 400W Power Supply FIO Kit 515739-B21 HP 500W NHP Power Supply Option Kit 583437-B21 Step 3: Choose Additional Options for Factory Integration (only one of the following from each list unless otherwise noted) HP Storage Controllers SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2) HP Smart Array P212/256 MB w/Battery FIO 491191-B21 HP Smart Array P411/256 w/Battery FIO 491193-B21 HP Smart Array P212/256MB Controller 462834-B21 HP Smart Array P212/Zero Memory (ZM) Controller 462828-B21 QuickSpecs HP ProLiant DL120 Generation 6 Configuration Information - Factory Integrated Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 14
Step 4: Choose Additional Factory Integratable Options NOTE: For additional options, please refer to the "Core Options and Additional Options" section below. QuickSpecs HP ProLiant DL120 Generation 6 Configuration Information - Factory Integrated Models DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 15
NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information. HP Unique Options HP Internal USB Cable G6 Kit NOTE: This option required to connect a USB device internally. 536769-B21 HP Memory Unbuffered with ECC DIMMs (UDIMM) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500668-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21 HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 Registered DIMMs (RDIMM) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit 500660-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator . NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient HP Optical Drives HP 9.5mm SATA DVD-ROM Optical Drive 481045-B21 HP 9.5mm SATA DVD RW Optical Drive 481047-B21 HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516828-B21 HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516816-B21 HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 454232-B21 HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 516814-B21 HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 416127-B21 HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive 384854-B21 SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 507616-B21 HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 507614-B21 HP 1TB 3G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 461137-B21 QuickSpecs HP ProLiant DL120 Generation 6 Core Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 16
HP 750GB 3G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive 461135-B21 SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 516830-B21 HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 516826-B21 HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 454234-B21 HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417950-B21 HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive 417855-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive 507632-B21 HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive 454146-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive 458928-B21 SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507774-B21 HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 507772-B21 HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive 458941-B21 SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive 571230-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive 458945-B21 SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 571232-B21 HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 458947-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html (Worldwide) QuickSpecs HP ProLiant DL120 Generation 6 Core Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 17
HP Networking HP NC112T PCI Express Gigabit Server Adapter 503746-B21 HP NC360T PCI Express Dual Port Gigabit Server Adapter 412648-B21 HP NC364T PCI Express Quad Port Gigabit Server Adapter 435508-B21 HP NC365T 4-port Ethernet Server Adapter 593722-B21 HP NC373F PCI Express Multifunction Gigabit Server Adapter 394793-B21 HP NC373T PCI Express Multifunction Gigabit Server Adapter 394791-B21 HP NC375T PCI Express Quad Port Gigabit Server Adapter 538696-B21 HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs HP I/O Expansion Options HP 1U PCI-X Riser Option Kit NOTE: For PCI-X Card support only. NOTE: The PCI-X Riser option is available to convert the full-length, full-height PCI-Express slot to PCI-X slot for PCI-X cards only. 516230-B21 HP Power Supplies HP 500W NHP Power Supply Option Kit 583437-B21 QuickSpecs HP ProLiant DL120 Generation 6 Core Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 18
Entry-Level Server Management HP LO100i Advanced Pack License, including 1 year of 24x7 Technical Support and Updates, Electronic NOTE: Electronic LTUs are only available through limited points of sales; if not available, order a printed license entitlement certificate (xxxxxx-B2x) instead. TA859AAE HP Insight Software HP Insight Control server deployment HP Insight Control server deployment, Electronic License including 1 year of 24x7 Technical Support and Updates T9082AAE HP Insight Control server deployment , No Media, 1-Server License, including 1 year of 24x7 Technical Support and Updates 452151-B21 NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single activation key. NOTE: Electronic software is available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. NOTE: Licenses ship without media. The Insight Software Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightcontrol (click on Download button). NOTE: For additional license options please see the Insight Control QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html HP Security-TPM HP Trusted Platform Module Option Kit 488069-B21 HP Storage Controllers SAS Controllers Smart Array P212 Controller HP Smart Array P212/Zero Memory Controller 462828-B21 HP Smart Array P212/256 MB Controller 462834-B21 Smart Array P411 Controller HP Smart Array P411/256 MB Controller 462830-B21 HP Smart Array P411/512 MB Battery Backed Write Cache 462832-B21 Optional Upgrades 1G Flash Backed Write Cache 534562-B21 512MB Flash Backed Write Cache 534916-B21 HP Smart Array P411/1G Flash Backed Write Cache 572531-B21 HP Smart Array P411/512MB Flash Backed Write Cache 578229-B21 256 MB Cache Module NOTE: Supported on HP Smart Array P212 Controller only. 462968-B21 512MB BBWC NOTE: Supported on HP Smart Array P411 Controller only. 462967-B21 Battery Kit upgrade NOTE: To enable BBWC on the 256MB cache. NOTE: Supported on HP Smart Array P212 Controller, and HP Smart Array P411only. 462969-B21 HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7 Technical Support NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). 516471-B21 QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 19
Include one year of 24x7 HP Software Technical Support Services. HP CA ASSY 38" 4 SATA to MINI-SAS Kit 591475-B21 SCSI HBA HP SC11Xe Host Bus Adapter 412911-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html (Smart Array P411 Controller) http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html (Smart Array Advanced Pack) http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA) HP Backup & Recovery Software Data Protector Express HP Data Protector Express 4.0 SP1 Backup Server BB117BA HP Data Protector Express 4.0 SP1 for Microsoft Small Business Server BB118BA HP Data Protector Express Backup Server 4.0 SP1 Upgrade from Data Protector Express Single Server Edition BB117BT NOTE: Only one of these Data Protector Express base products is required. To see available options: http://www.hp.com/go/dataprotectorexpress HP Tape Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect . HP StorageWorks DAT 160 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. Q1587A HP StorageWorks 1U USB Rack-Mount Kit with one DAT 320 USB Tape Drive AP835A HP StorageWorks DAT 320 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. AJ830A HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. DW085A HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack- Mount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. EH847A HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using the HP SC44Ge SAS Host Bus Adapter (416096- B21) recommended. AH558A HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended. AH559A QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 20
HP Disk Backup NOTE: For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP StorageWorks disk backup products see: http://www.hp.com/go/connect . HP StorageWorks D2D Backup Systems with Backup Data Deduplication HP StorageWorks D2D2502i Backup System NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. EJ001B HP StorageWorks D2D2504i Backup System NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. USB Removable Media RDX Disk Backup Systems EJ002B USB Removable Media RDX Disk Backup Systems HP StorageWorks RDX320 Internal Removable Disk Backup System NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 320GB of disk capacity per data cartridge. AJ767A HP StorageWorks RDX500 Internal Removable Disk Backup System NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 500GB of disk capacity per data cartridge. AJ934A HP StorageWorks RDX750 Internal Removable Disk Backup System NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 750GB of disk capacity per data cartridge. AW577A HP Uninterruptible Power Systems HP Rack-mountable UPS HP UPS R1500 G2 HP, R1.5kVA UPS, 1U, NA AF419A HP, R1.5kVA UPS, 1U, INTL AF418A HP, R1.5kVA UPS, 1U, JPN/TW AF421A NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12507_div/12507_div.html (Worldwide) HP R/T3000 UPS HP R/T3000 UPS, High voltage, NA/JPN AF453A HP R/T3000 UPS, High voltage, detachable inlet cord INTL AF454A NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/10671_div/10671_div.html (Worldwide) HP Rack-Mountable R5500 UPS HP R5500 VA UPS, INTL AF416A HP R5500 VA UPS, NA/JPN AF426A QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 21
NOTE: Please see QuickSpecs Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11871_div/11871_div.html (Worldwide) HP Power Distribution Units HP Monitored Power Distribution Unit: Full Rack Version HP 8.6 kVA S1324 Monitored PDU- single input, 3Ã, 24A (NA/JPN) AF504A HP 8.3 S1140 Monitored PDU- single input, 1Ã, 40A (NA/JPN) AF506A HP 11 kVA S1316 Monitored PDU- single input, 3Ã, 16A (INTL) AF508A HP 7.3 kVA S1132 Monitored PDU- single input, 1Ã, 32A (INTL) AF510A HP Monitored Power Distribution Unit: Half Rack Version HP 4.9 kVA S124 Monitored PDU- single input, 1Ã, 24A (NA/JPN) AF914A HP 7.3 kVA S132 Monitored PDU- single input, 1Ã, 32A (INTL) AF915A Modular Power Distribution Units 1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and 9000 series racks). HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC) (NA, Japan) 252663-D72 HP Modular Power Distribution Units (mPDU), High Voltage 8.3 kVA Modular PDU, 40A, NA/JPN 252663-D73 HP Modular Power Distribution Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l) 252663-B31 HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW) NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements. 252663-B24 NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs for additional options including shorter jumper cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html (Worldwide) NOTE: For additional information on HP Power Distribution Units including accessories please go to: www.hp.com/go/pdu . HP Rack Series 10642 G2 (42U) Rack Cabinet - Pallet AF001A 10642 G2 (42U) Rack Cabinet - Shock Pallet AF002A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower . QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 22
HP Rack Options HP KVM Switch Options HP 0x2x16 KVM SVR CNSL G2 VM CAC SW AF618A HP 0x2x32 KVM SVR CNSL G2 VM CAC SW AF619A HP 1x1Ex8 KVM IP CNSL G2 VM CAC SW AF620A HP 2x1Ex16 KVM IP CNSL G2 VM CAC SW AF621A HP 4x1Ex32 KVM IP CNSL G2 VM CAC SW AF622A HP Serial Console Server Options Server console switch 0x2x8 AF616A Server console switch 0x2x16 AF617A NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm . NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm . HP Care Pack Services Hardware Services On-site Service 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic UJ252E 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic UJ253E Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic UJ251E Installation Services Hardware Services 6-Hour Call to Repair On-Site Service UJ254E Hardware Installation, Electronic UJ261E NOTE: For more information, customer/resellers can contact: http://www.hp.com/hps/ QuickSpecs HP ProLiant DL120 Generation 6 Additional Options DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 23
HP ProLiant DL120 G6 Models NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory SATA Models: 4GB of PC3-10600E DDR3 UDIMM running at 1333MHz with ECC capabilities memory installed. SAS Models 4GB of PC3-10600R RDIMM running at 1333MHz Standard Memory Plus Optional Memory Up to 16 GB memory is available with the optional installation of 4 x 4GB PC3-10600E UDIMM ECC DDR3 SDRAM DIMM Memory kits. Up to 12GB memory is available with the optional installation of 6 x 2GB PC3-10600R RDIMM DDR3 SDRAM DIMM Memory kits Up to 16 GB memory is available with the optional installation of 4 x 4GB PC3-8500R RDIMM DDR3 DIMM Memory kits. NOTE: The below chart does not represent all possible memory configurations. NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1 and 3 are interleaving pair. Slots 2 and 4 are interleaving pair). Some DIMM installation guidelines are summarized below: For the HP ProLiant DL120 G6 server with six (6) memory slots There are two (2) channels per server There are three (3) DIMM slots for each memory channel; six (6) total slots Memory channel 1 consists of the three (3) DIMMs that are closest to the processor Memory channel 2 consists of the three (3) DIMMs that are furthest from the processor Different processor (CPU) has different memory support Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs) It is not required, but it is recommended to load the channels similarly if possible Support up to 4 DIMMs (2 DIMMs per channel) max 8GB PC3 10600E (DDR3 1333 MHz) Support up to 4 DIMMs ( 2 DIMMs per channel) max 16GB PC3-8500R (DDR3-1066 MHz) Support up to 6 DIMMs (3 DIMMs per channel) max 12GB PC3-10600R (DDR3-1333 MHz). Support single, double and quad ranks of DIMM Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the CPU No mixing DIMM voltage; all DIMMs must be the same voltage The UDIMM installing sequence: DIMM1E DIMM2C DIMM3A DIMM4F DIMM5D DIMM6B 1 DIMMs Empty Empty DIMM Empty Empty Empty 2 DIMMs Empty Empty DIMM Empty Empty DIMM 4 DIMMs Empty DIMM DIMM Empty DIMM DIMM The RDIMM installing sequence: DIMM1E DIMM2C DIMM3A DIMM4F DIMM5D DIMM6B 1 DIMMs Empty Empty DIMM Empty Empty Empty 2 DIMMs Empty Empty DIMM Empty Empty DIMM 4 DIMMs Empty DIMM DIMM Empty DIMM DIMM 6 DIMMs DIMM DIMM DIMM DIMM DIMM DIMM QuickSpecs HP ProLiant DL120 Generation 6 Memory DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 24
Following are memory options available from HP: HP Memory Unbuffered with ECC DIMMs (UDIMM) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500668-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500670-B21 HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 500672-B21 Registered DIMMs (RDIMM) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit 500656-B21 HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit 500660-B21 NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator . NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant energy efficient features, see: www.hp.com/go/proliant-energy-efficient QuickSpecs HP ProLiant DL120 Generation 6 Memory DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 25
1- 4 Four SATA or SAS drive bays A Optical Drive Bay: Optional DVD-ROM, or DVD-RW drive Drive Support Quantity Supported Position Supported Controller Removable Media 9.5mm IDE DVD-ROM or DVD-RW Drive Up to 1 A HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives Quantity Supported Position Supported Controller 600GB 6G SAS 15K DP 450GB 6G SAS 15K DP 450GB 3G SAS 15K DP 300GB 6G SAS 15K DP 300GB 3G SAS 15K DP 146GB 3G SAS 15K DP Up to 4 1-4 HP Smart Array P212 Controller NOTE: Support for transfer rates up to 3 Gb/s SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 1TB 3G SAS 7.2K DP 750GB 3G SAS 15K DP Up to 4 1-4 HP Smart Array P212 Controller NOTE: Support for transfer rates up to 3 Gb/s SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives Quantity Supported Position Supported Controller 600GB 6G SAS 15K DP 450GB 6G SAS 15K DP 450GB 3G SAS 15K DP 300GB 3G SAS 15K DP 146GB 3G SAS 15K DP Up to 4 1-4 HP Smart Array P212 Controller NOTE: Support for transfer rates up to 3 Gb/s QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 26
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 2TB 3G SATA 7.2K 1TB 3G SATA 7.2K 750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Supported Position Supported Controller 2TB 3G SATA 7.2K 1TB 3G SATA 7.2K 500GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives Quantity Supported Position Supported Controller 250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives Quantity Supported Position Supported Controller 250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA SATA Non-Hot Plug LFF (3.5-inch) Drives Quantity Supported Position Supported Controller 250GB 1.5G SATA 7.2K 160GB 1.5G SATA 7.2K Up to 4 1-4 HP Smart Array B110i SATA RAID Controller (RAID 0/1/1 0) NOTE: Transfer rate:3Gb/s SATA Maximum Storage Capacity - (SAS drives) Internal 8.0TB (4 x 2TB SAS) External 28.0TB (1 x (14 x 2TB SAS)) Total 36.0TB Maximum Storage Capacity - (SATA Drives) Internal 8.0TB (4 x 2TB SATA) External 24.0TB [1 x (12 x 2TGB SATA)] Total 32.0TB NOTE: In order to implement integrated SATA RAID with Easy 'set-up CD' on Windows 2000/2003, the use of a floppy drive is necessary. Tape and Disk Backup NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape . For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP StorageWorks disk and tape backup products see: http://www.hp.com/go/connect . Position Recommended Controller Part Number HP StorageWorks SCSI Tape Drives External HP SC11Xe Host Bus Adapter 412911-B21 QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 27
LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 1U Rack-Mount Kit 3U Rack-Mount Kit Please check the full compatibility information at: http://www.hp.com/go/connect HP StorageWorks USB Tape Drives DAT 40 DAT 72 DAT 160 DAT 320 1U USB Rack-Mount Kit External USB 2.0 Port N/A HP StorageWorks SAS Tape Drives DAT 160 DAT 320 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-4 Ultrium 1760 LTO-4 Ultrium 1840 LTO-5 Ultrium 3000 LTO-5 Ultrium 3280 1U Rack-Mount Kit 3U Rack-Mount Kit External HP Smart Array P212 SAS controller Please check the full compatibility information at: http://www.hp.com/go/connect 462828-B21 HP StorageWorks SCSI Tape Autoloaders DAT 72x10 Autoloader 1/8 G2 Autoloader External HP SC11Xe Host Bus Adapter Please check the full compatibility information at: http://www.hp.com/go/connect 412911-B21 HP StorageWorks SCSI Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 External HP U320e SCSI Dual Channel Controller Please check the full compatibility information at: http://www.hp.com/go/connect AH627A HP StorageWorks SAS Tape Autoloaders and Libraries 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096 External HP Smart Array P212 SAS controller Please check the full compatibility information at: http://www.hp.com/go/connect 462828-B21 QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 28
HP StorageWorks Fibre Channel Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for connectivity information and the supported Fibre Channel HBAs shown in this QuickSpecs. HP StorageWorks USB RDX Removable Disk Backup System RDX160 RDX320 RDX500 RDX750 External USB 2.0 port N/A HP StorageWorks D2D Backup Systems, iSCSI D2D2500i D2D4000i External Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. HP StorageWorks D2D Backup Systems, Fibre Channel D2D4000fc External Direct server attach is not supported, requires connection via SAN fabric. See: http://www.hp.com/go/connect QuickSpecs HP ProLiant DL120 Generation 6 Storage DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 29
System Unit Dimensions (H x W x D) (with bezel) 4.32 x 44.81 x 70.0 mm (1.69" x 17.64" x 27.56") Weight (approximate) Maximum (four hard drives, power supply, and processor installed) 31.49 lb (14.3kg) Minimum (one hard drive, power supply, and processor installed) 28.2lb (12.8kg) Input Requirements (per power supply) Range Line Voltage 90 - 132 VAC, 180 - 264 VAC Rated Input Current 6 A (at 100 VAC), 3 A (at 200 VAC) Rated Input Frequency 47 to 63 Hz Rated Input Power <550W (at 100 VAC) 550W (at 200 VAC) BTU Rating Maximum 1314 BTU/hr (at 100 VAC), 1314 BTU/hr (at 200 VAC) Power Specifications To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant- energy-efficient or www.hp.com/go/hppoweradvisor - Click on the system of interest. Example: DL120 G6 - Follow the instructions of the next screens. Power Supply Output (per power supply) Rated Steady-State Power 400 W (at 100 VAC), 400 W (at 200 VAC) Maximum Peak Power 430 W (at 100 VAC), 430 W (at 200 VAC) System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F). Non-operating -30° to 65°C (-22° to 149°F). Maximum rate of change is 20°C/hr (36°F/hr). Relative Humidity (non-condensing) Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non- condensing. Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. Altitude Operating 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 30
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle LWAd 6.30 B LpAm 44.1 dBA Operating LWAd 6.34 B LpAm 44.4 dBA Emissions Classification (EMC) FCC Rating Class A Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. Power Supply Input voltage specifications Rated input voltage 100 VAC to 240 VAC Input Specifications Rated input line 90 VAC to 264VAC Frequency range 47 to 63 Hz Rated input power @ 115V input, Rated input power = 500W (assume output wattage=400W @ 230V input, Rated input power = 500W (assume output wattage=400W) Rated input current 6 A, 3 A (110 V, 220 V) Steady state power 400W (rated) BTU Rating 1710 BTU/hr Ambient temperature range Operating 41° to 122° F (5° to 50° C) Non-operating -40° to 167° F (-40° to 75° C) Relative humidity (non-condensing) Operating 5% to 95% Non-operating 5% to 95% Dielectric voltage withstand Input to output 2150 VDC minimum, withstand 1 min Input to ground 2150 VDC minimum, withstand 1 min Maximum Wet Bulb Temperature 104° F (40° C) QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 31
Integrated Serial ATA Controller Simultaneous drive transfer channels 4 channels Transfer rate synchronous (maximum theoretical) 150 MB/s per channel; 300 MB/s in RAID 0 pair Data transfer method Intel® 82801IR Integrated Serial ATA Host Controller (non-RAID mode) Intel® 82801IR Integrated Serial ATA Host Controller (RAID Mode) Drive support Serial ATA Data transfer modes Legacy Mode Combined Mode Protocol Serial ATA Feature NCQ (Native Command Queuing); AHCI (Advanced Host Controller Interface) RAID levels supported 0, 1 RAID Features Supports multiple logical volumes Setup through ROM based Array Configuration Utility Installation scripting support NOTE: This controller does not support Hot Plug functions or LED functions. RAID OS Support Microsoft Windows Server 2003 NOTE: In order to implement integrated SATA RAID with Smart Start 7.90 on Windows 2000/2003, the use of a floppy drive is necessary. Linux (Red Hat, SuSE, UnitedLinux) Embedded HP NC107i PCIe Gigabit Server Adapter Network Interface 10Base-T/ 100Base-TX/ 1000Base-TX Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver. Compatibility IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.3u 100Base-TX Data Transfer Method Four lane (x4), 100MHz PCI Express Reference Clock Controller BCM5723 Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s 10Base-T (Full-Duplex) 20 Mb/s 100Base-TX (Half- Duplex) 100 Mb/s 100Base-TX (Full- Duplex) 200 Mb/s 1000Base-TX (Half and Full-Duplex) 2000Mb/s Connector RJ-45 connector Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m) 10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m) QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 32
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive 458947-B21 Capacity 160,041MB Height Maximum drive dimension 1.028 in. (26.1 mm) Width 4.00 in (101.6 mm) Depth Maximum drive dimension 5.787 in (147.0 mm) Interface Serial ATA Transfer Rate (Maximum) 3Gb/s Native Command Queuing Supported Seek Time (typical reads, including settling) Single Track 2.0 ms Average <11 ms Full-Stroke 22.0 ms Rotational Speed 7,200 rpm Physical Configuration Bytes/Sector 512 Logical Blocks 312,581,808 Operating Temperature (system inlet air temperature) 50° to 95° F (10° to 35° C) Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. © Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less. QuickSpecs HP ProLiant DL120 Generation 6 Technical Specifications DA - 13504 Worldwide QuickSpecs â Version 8 â 8/20/2010 Page 33