HP ProLiant DL160 Quickspecs

Hot Plug SAS/SATA and Non-Hot Plug SATA Models Front View: Rear View: 1. Access panel 1. Power Supply Cable Socket 2. Quad-Core IntelÂ® XeonÂ® 5400 series processors (supports up to two) 2. PS/2 Mouse Port 3. PS/2 Keyboard Port 3. Eight PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800) fully buffered DIMM memory slots 4. Two GbE LAN ports for NIC 1 and NIC 2 (RJ-45) 5. Rear USB ports 4. Power supply (650 Watts) 6. LO100i 10/100 Mbps LAN port for IPMI management (RJ-45) 5. System fans 7. Video Port 6. Optional CD-RW or DVD-ROM drive 8. Serial Port 7. Two USB ports 9. Low-Profile PCI Express x8/PCI-X riser board slot cover 8. Power on/off & system LEDs 10. Standard height/full-height PCI Express x16/PCI-X riser board 9. Optional 3 rd and 4 th 3.5â Non-Hot plug SATA or hot plug SAS/SATA hard drive bays 10. Standard 1 st and 2 nd 3.5â Non-Hot plug SATA or hot plug SAS/SATA hard drive bays 11. Expansion Slots: Non-Hot Plug Models â Two available x16 PCI-Express Gen2 slots Hot Plug Models â One available x16 PCI-Express slot Gen2 slot What's New Support for up 400GB 3G 10K 3.5" DP SAS Enterprise Hard Drive At A Glance The HP ProLiant DL160 G5 server is an affordable 1U, dual processor capable server equipped with essential performance features that provide customers with a platform to design a fully optimized solution. It is ideal for general purpose and high performance computing. Processors : Supports up to two IntelÂ® Quad-Core 5400 or Dual-Core 5200 sequence processors QuickSpecs HP ProLiant DL160 Generation 5 Overview DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 1
Quad-Core IntelÂ® XeonÂ® processors 5400 sequence with 12 MB Level 2 cache Dual-Core IntelÂ® XeonÂ® processors 5200 sequence with 6 MB Level 2 cache IntelÂ® 5400 Chipset Memory : Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC Internal Drive Support : Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or; Support for up to four 3.5" Hot plug Serial Attached SCSI (SAS) or SATA hard drives. NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. Internal storage capacity of up to 1.0TB (4 x 1TB Hot Plug 3.5" SATA), 3.0TB (4 x 750 Non-Hot Plug SATA) or 4.0TB (4 x 1TB Hot Plug 3.5" SAS) Network Controller : Two embedded NC105i PCIe Gigabit Server Adapters Storage Controllers : Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller NOTE: Transfer rate: 1.5 Gb/s SATA Hot Plug SAS/SATA Models: HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1 NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. NOTE: Transfer rate: 1.5 Gb/s SATA, 3Gb/s SAS Expansion Slots : Non-Hot Plug Models: Two available PCI Express 2.0 slots: Slot 1: full-length/full-height PCI-Express 2.0 x16 Slot 2: low-profile/half-height PCI-Express 2.0 x16 Hot Plug Models: One available PCI-Express slot: Slot 1: full-length/full-height PCI-Express 2.0 x16 Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller Management : HP Lights Out 100i Advanced Remote Management with new licensed key activated upgrades for Virtual KVM and virtual media support. LO100i management support for the DL160 G5 includes: IPMI 2.0 & SMASH CLP support ROM Setup Utility Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD-ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements) Enhanced browser interface and embedded KVM over IP provides OS-independent remote graphical console New Licenses that have EULAs with one-time, optional, license activation key to allow for easy, future upgrades which will be chargeable when they become available. USB Ports : Five USB ports (two front, one internal, two rear) Optical Drive : Support for one (optional): DVD-ROM, DVD/CD RW Power Supply : 650W Power Supply (Non-Hot Plug, Autoswitching) Optional high-efficiency model NOTE: Optional high-efficiency model requires the purchase of HP Power Supply Backplane (453652- B21) Additional Features : Support for: NVIDIA Quadro FX3700 512MB PCIe x 16 graphics card NVIDIA Quadro FX1700 512MB PCIe x 16 graphics card Form Factor : Rack (1U) Fixed mounting rails included with all models QuickSpecs HP ProLiant DL160 Generation 5 Overview DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 2
Deployment/Serviceability : Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty : This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty. SAS Midline drives have a one-year warranty. SAS Enterprise drives have a three-year warranty. NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html . QuickSpecs HP ProLiant DL160 Generation 5 Overview DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 3
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-6954ENW.pdf NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core IntelÂ® XeonÂ® processor X5482 (3.20 GHz, 120W, 1600MHz FSB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Quad-Core IntelÂ® XeonÂ® processor X5472 (3.00 GHz, 120W, 1600MHz FSB) Quad-Core IntelÂ® XeonÂ® processor X5470 (3.33 GHz, 120W, 1333MHz FSB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Quad-Core IntelÂ® XeonÂ® processor X5460 (3.16 GHz, 120W, 1333MHz FSB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Quad-Core IntelÂ® XeonÂ® processor L5430 (2.60 GHz, 50W, 1333MHz FSB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Quad-Core IntelÂ® XeonÂ® processor L5420 (2.50 GHz, 50W, 1333MHz FSB) Quad-Core IntelÂ® XeonÂ® processor L5410 (2.33 GHz, 50W, 1333MHz FSB) Quad-Core IntelÂ® XeonÂ® processor E5472 (3.00 GHz, 80W, 1600MHz FSB) Quad-Core IntelÂ® XeonÂ® processor E5462 (2.80 GHz, 80W, 1600MHz FSB) Quad-Core IntelÂ® XeonÂ® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) Quad-Core IntelÂ® XeonÂ® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Dual-Core Processors Dual-Core IntelÂ® XeonÂ® processor X5272 (3.40 GHz, 80W, 1600MHz FSB) Dual-Core IntelÂ® XeonÂ® processor L5240 (3.00 GHz, 40W, TDP, 1333MHz FSB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Upgradeability Upgradeable to two processors Chipset IntelÂ® 5400 Chipset Cache Memory 12 MB (2 x 6 MB) Level 2 cache (5400 sequence) 6 MB (1 x 6 MB) Level 2 cache (5200 sequence) Memory Protection Advanced ECC capabilities Memory Type PC2-5300 (DDR2-667) and PC2-6400 (DDR2-800) Standard 1 GB (2 x 512 MB) Maximum 32 GB 64 GB (8 x 4 GB) PC2-6400 (8 x 8 GB) QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 4
Network Controller Two embedded NC105i PCIe Gigabit Server Adapters Expansion Slots # Technology Bus Width Connector Width * Bus Number * Device No . ** Form Factor Notes 1 PCI-Express 2.0 x16 x16 1 0 Full length, full height 3.3 volts 1 PCI-X *** 64-bit N/A 5 1 Full length, full height 3.3 volts 2 PCI-Express 2.0 x16 x16 6 3 Low Profile 3.3 volts 2 PCI-X *** 64-bit N/A 5 1 Low Profile 3.3 volts NOTE: All slots can accept universal keyed PCI cards * Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number. ** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus). *** PCI-X bus speed will be 133MHz when only one PCI-X card is installed. It will be 100MHz when both slots have PCI-X cards installed. Storage Controller Non-Hot Plug SATA Models HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting SW RAID 0,1 NOTE: Transfer rate: 1.5 Gb/s SATA Hot Plug SATA/SAS Models HP SC40Ge HBA with RAID 0, 1 NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS NOTE: A diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD. Storage Optical Drives: DVD-ROM 8x IDE (ATAPI) DVD-ROM drive, slim (optional) DVD/CD RW 24x IDE (ATAPI) CD-ROM drive (optional) Diskette Drives Via USB only Drive Bays: Non-Hot Plug SATA Up to 4 Non-hot plug SATA 3.5" drives Hot Plug SATA/SAS Up to 4 Hot plug SAS/SATA 3.5" drives Maximum Internal Storage Non-Hot Plug SATA 3.0TB 4 x 750GB Hot Plug SATA 4.0TB 4 x 1TB Hot Plug SAS 4.0TB 4 x 1TB QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 5
Interfaces Parallel None Network RJ-45(Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management) Serial 1 Pointing Device (Mouse) 1 Graphics 1 Keyboard 1 USB 5 (two front, one internal, two rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb- support.html . Graphics 32MB shared supporting 1600x1200x16M resolution Form Factor Rack (1U), (1.75 in/4.45 cm) Server Management Stand Alone Software Product and ProLiant Essentials Lights-Out 100i HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following: LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH LO100i Advanced Pack License are upgrades for essential, secure, remote control, serial console, virtual media, and Virtual KVM (graphical hardware-based, remote console) NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products' QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/ remotemgmt.html . ProLiant Essentials Rapid Deployment Pack Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install using images and scripted profiles. For more information, visit: http://www.hp.com/go/rdp . NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information. QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 6
HP Systems Insight Manager HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms. Core Infrastructure Management Subscriber's Choice Subscriber's Choice Driver and Support Alerts/Notifications is a web- based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at: http://www.hp.com/go/subscriberschoice and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis. ROMPaq, software and latest drivers The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through software and drivers download pages website at: http://www.hp.com/go/support . HP Serviceguard for Linux (SG/LX) HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes. The following is a quick summary of HP Serviceguard for Linux features and support. For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info . Supported Linux Distributions: Red Hat EL 4 Red Hat EL 5 SUSE SLES10 Supported Server Platforms HP Integrity BladeSystem to Superdome HP ProLiant BladeSystem p-Class & c-Class HP ProLiant DL HP ProLiant ML IBM System x Dell PowerEdge Sun x64 Fujitsu Siemens PRIMERGY Supported Virtual Machines SG/LX in HP Integrity Virtual Machines guests SG/LX in VMware ESX guests SG/LX in Red Hat and SUSE Xen hosts (DOM0) Application Integration Toolkits HP Serviceguard for Linux Oracle Database Toolkit HP Serviceguard Extension for SAP on Linux (SGeSAP/LX) Free Application Integration Toolkits: Apache MySQL NFS PostgreSQL Samba Tomcat Sendmail QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 7
Disaster Tolerant Solutions HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites Software updates are distributed by HP Services to customers with support contracts NOTE: For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx or see the HP Serviceguard for Linux QuickSpecs. NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/swsupport . Industry Standard Compliance ACPI V2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support MicrosoftÂ® Logo certifications IPMI 2.0, SMASH CLP compliant Manageability HP Lights-Out 100i Standard provides the following OS-independent remote control capabilities: Virtual power System event log access System health Remote serial console (serial redirection) Browser, Telnet access SMASH-CLP compliant IPMI 2.0 compliant HP Lights-Out 100i Advanced Pack provides license key activated upgrades to the following: Virtual KVM (KVM over IP functionality embedded on the system board) Security Power-on password Setup password QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 8
Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately. If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix . UPS and PDU Power Cord Matrix Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for UPS and PDU units: http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/index.html . Power Supply 650 Watts, auto-switching, PFC (Power Factor Correcting) NOTE: Factory upgradeable to high-efficiency (HE) power supply for lower TCO System Fans 6 system fans ship standard; Non-hot plug, Non-redundant OS Support Microsoft Windows Server 2003 R2 Microsoft Windows Server 2008 Microsoft Windows Small Business Server 2008 Microsoft Windows Essential Server 2008 Red Hat Enterprise Linux SUSE Linux Enterprise Server Sun Solaris for x64/x86-based Systems NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/DL160G5 . Rack Airflow Requirements Rack 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches) CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 9
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl160 . Rack Support The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36". Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. For additional information, please visit: www.racksolutions.com . Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express . HP Enterprise Configurator The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. Service and Support HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs. HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs. HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack. To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime. Recommended Service â Simplify ProLiant solution implementation, maintenance and management. QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 10
Support Service â 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only Deployment Service â Hardware Installation only Enhanced Service â Optimize service level to increase IT performance and availability Support Service â 3 Year 13x5 Same Business Day, 4-Hour response coverage Deployment Service â Installation and Start-up only Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays. For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices http://www.hp.com/go/proliant/carepack QuickSpecs HP ProLiant DL160 Generation 5 Standard Features DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 11
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html HPC Interconnects InfiniBand PCI-X and PCI-Express adapters Gigabit Ethernet Use embedded ports Myrinet XP PCI-X Rev D, Rev E and Rev F adapters QuickSpecs HP ProLiant DL160 Generation 5 HPC Interconnects DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 12
Non-Hot Plug Serial ATA (SATA) Models NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N: 452130-B21) in order to connect a hardware RAID controller. HP DL160 G5 X5472 Non-Hot Plug SATA, 2GB, (1P) 445198-xx1 HP DL160 G5 E5430 Non-Hot Plug SATA, 1GB, (1P) 445197-xx1 HP DL160 G5 E5405 Non-Hot Plug SATA, 1GB, (1P) 445196-xx1 Processor(s) One of the following depending on model (1) Quad-Core IntelÂ® XeonÂ® processor X5472 (3.00 GHz, 120W, 1600 MHz FSB) (1) Quad-Core IntelÂ® XeonÂ® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) (1) Quad-Core IntelÂ® XeonÂ® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Cache Memory 12MB (2 x 6MB) Level 2 cache Memory One of the following depending on model 2GB (2 x 1GB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with Advanced ECC (X5472 models) 1GB (2 x 512MB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with Advanced ECC (E5430, E5405 models) Network Controller Two embedded NC105i PCIe Gigabit Server Adapters Storage Controller HP Embedded SATA RAID Controller Hard Drive 160GB NHP SATA HDD Internal Storage 3.0TB maximum (4 x 750GB Non-Hot plug 3.5" SATA hard drives) Optical Drive Optional CD/DVD-ROM, DVD/CD RW Form Factor Rack (1U) Hot Plug Serial ATA (SATA)/ Serial Attached SCSI (SAS) Models HP DL160 G5 X5472 Hot Plug SAS/SATA, 2GB, (1P) 445204-xx1 HP DL160 G5 E5430 Hot Plug SAS/SATA, 1GB, (1P) 445203-xx1 HP DL160 G5 E5405 Hot Plug SAS/SATA 1GB, (1P) 445202-xx1 Processor(s) One of the following depending on model (1) Quad-Core IntelÂ® XeonÂ® processor X5472 (3.00 GHz, 120W, 1600 MHz FSB) (1) Quad-Core IntelÂ® XeonÂ® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) (1) Quad-Core IntelÂ® XeonÂ® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) Cache Memory 12 MB (2 x 6 MB) Level 2 cache Memory One of the following depending on model 2 GB (2 x 1 GB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with Advanced ECC (X5472 models) 1 GB (2 x 512 MB) PC2-5300 DDR2 fully buffered DIMMs (667MHz) with Advanced ECC (E5430, E5405 models) Network Controller Two embedded NC105i PCIe Gigabit Server Adapters Storage Controller HP SC40Ge SAS HBA with RAID Hard Drive None ship standard (up to 4 Hot Plug SATA or SAS drives supported) Internal Storage 4.0TB max. (4 x 1TB Hot Plug 3.5" SAS/SATA hard drives) Optical Drive Optional CD/DVD-ROM, DVD/CD RW Form Factor Rack (1U) QuickSpecs HP ProLiant DL160 Generation 5 Models DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 13
Country Code Key xx = 00 U.S. xx = 20 Brazil (P/N 445202-201 only) xx = 29 Japan xx = 37 APD xx = 42 Euro xx = AA PRC QuickSpecs HP ProLiant DL160 Generation 5 Models DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 14
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: FIO indicates that this option is a Factory Installable Option. Step 1: Base Configuration (choose one of the following configurable models) Non-Hot Plug SATA Model NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N: 452130-B21) in order to connect a hardware RAID controller. HP ProLiant DL160 G5 Non-Hot Plug SATA Rack CTO Chassis 445192-B21 Factory Integrated Model ships with: Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable) Two available PCI-Express 2 slots: Slot 1: full-length/full-height Slot 2: low-profile/half-height 650 Watt Power Supply One Highline IEC Power Cord 6 Non-Hot Plug Fans Rack (1U), (1.75 in / 4.45 cm) Fixed Rails Hot Plug Model HP ProLiant DL160 G5 Hot Plug SAS/SATA Rack CTO Chassis 445193-B21 Factory Integrated Model ships with: Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable) Two available PCI-Express 2 slots: Slot 1: full-length/full-height Slot 2: low-profile/half-height 650 Watt Power Supply One Highline IEC Power Cord 6 Non-Hot Plug Fans Rack (1U), (1.75 in / 4.45 cm) Fixed Rails Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) Processors Quad-Core Processors Quad-Core IntelÂ® XeonÂ® processor X5482 (3.20 GHz, 120W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 495614-L21 and one 495614- B21. 495614-L21 QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 15
Quad-Core IntelÂ® XeonÂ® processor X5472 (3.00 GHz, 120W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 462465-L21 and one 462465- B21. 462465-L21 Quad-Core IntelÂ® XeonÂ® processor X5470 (3.33 GHz, 120W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 495612-L21 and one 495612- B21. 495612-L21 Quad-Core IntelÂ® XeonÂ® processor X5460 (3.16 GHz, 120W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 446085-L21 and one 446085- B21. 446085-L21 Quad-Core IntelÂ® XeonÂ® processor L5430 (2.60 GHz, 50W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 495616-L21 and one 495616- B21. 495616-L21 Quad-Core IntelÂ® XeonÂ® processor L5420 (2.50 GHz, 50W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 495479-L21 and one 495479- B21. 495479-L21 Quad-Core IntelÂ® XeonÂ® processor L5410 (2.33 GHz, 50W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 448369-L21 and one 448369- B21. 448369-L21 Quad-Core IntelÂ® XeonÂ® processor E5472 (3.00 GHz, 80W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 448365-L21 and one 448365- B21. 448365-L21 Quad-Core IntelÂ® XeonÂ® processor E5462 (2.80 GHz, 80W, 1600MHz FSB), FIO NOTE: If 2 processors are desired, select one 463076-L21 and one 463076- B21. 463076-L21 Quad-Core IntelÂ® XeonÂ® processor E5430 (2.66 GHz, 80 W, 1333 MHz FSB), FIO NOTE: If 2 processors are desired, select one 446079-L21 and one 446079- B21. 446079-L21 Quad-Core IntelÂ® XeonÂ® processor E5405 (2.00 GHz, 80W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 446077-L21 and one 446077- B21. 446077-L21 Dual-Core Processors Dual-Core IntelÂ® XeonÂ® processor X5272 (3.40 GHz, 80W, 1600MHz FSB) NOTE: If 2 processors are desired, select one 448371-L21 and one 448371- B21. 448371-L21 Dual-Core IntelÂ® XeonÂ® processor L5240 (3.00 GHz, 40W, 1333MHz FSB), FIO NOTE: If 2 processors are desired, select one 448373-L21 and one 448373- B21. 448373-L21 QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 16
Memory 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 800MHz 2 x 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit 495604-B21 Low Power 2 GB FBD PC2-5300 2 X 1 GB Low Power Kit 461826-B21 4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 461828-B21 8 GB FBD PC2-5300 2 x 4 GB Low Power Kit 466440-B21 Hard Drive NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. SATA Non-Hot Plug Midline (MDL) Drive NOTE: A minimum of one hard drive is required when purchasing Non-Hot Plug CTO Chassis Model (P/N 445192-B21). NOTE: SATA Non-Hot Plug Hard Drives ONLY required when purchasing Non- Hot Plug CTO Chassis Models (445192-B21) in Step 1. HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21 HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21 HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21 SATA Non-Hot Plug Entry (ETY) Drives HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21 Storage Controllers NOTE: A minimum of one SAS Controller is required when purchasing Hot Plug CTO Chassis Model (P/N 445193-B21). NOTE: The below storage controllers are intended for use with internal drives ONLY in the Hot Plug CTO Chassis Model (P/N 445193-B21). HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. 416096-B21 HP SC40Ge 4 Internal PCIe SAS RAID Half Height HBA, FIO NOTE: Recommended HBA when purchasing Hot Plug CTO Chassis Model (P/N 445193-B21). NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate 1.5 Gb/s SATA, 3 Gb/s SAS. 449363-B21 HP Smart Array E500/256MB Controller with Battery, FIO NOTE: Customers can only order one Smart Array E500/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160 G5 server based on battery space. 462105-B21 HP Smart Array E200/128 BBWC Controller 411508-B21 HP HBA SAS-SATA 4x1LN Cable Kit 452130-B21 QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 17
NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector. Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) Power Supply HP High Efficiency Power Supply Kit, FIO NOTE: Selection of the HE Power Supply Unit will remove the 650 Watt standard power supply and requires the purchase of Power Supply Backplane (p/n 453652-B21). 453650-B21 HP Power Supply Backplane, FIO NOTE: This backplane must be ordered with the High Efficiency Power Supply (P/N 453650-B2). 453652-B21 Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Options" section below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information. QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 18
Server Management Stand Alone Software Product and ProLiant Essentials NOTE: Electronic licensing options are available for Insight Control suites and select ProLiant Essentials software products. Please see the appropriate Insight Control and ProLiant Essentials QuickSpecs for additional information. Control Lights-Out 100i Advanced Pack HP Lights Out 100i Advanced Pack, No Media, 1-Server License NOTE: Supports HP ProLiant DL 160 G5, DL165 G5 and DL185 G5 servers. 455342-B21 NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products' QuickSpecs at this link for more information: http://h18004.www1.hp.com/products/servers/management/remotemgmt.html . DEPLOY Rapid Deployment Pack ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: This license allows 1 server to be deployed and managed via RDP. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. 452151-B21 NOTE: For additional License Kits please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information. Processor Quad-Core Processors Quad-Core IntelÂ® XeonÂ® processor X5482 (3.20 GHz, 120W, 1600MHz FSB) 495614-B21 Quad-Core IntelÂ® XeonÂ® processor X5472 (3.00 GHz, 120W, 1600MHz FSB) 462465-B21 Quad-Core IntelÂ® XeonÂ® processor X5470 (3.33 GHz, 120W, 1333MHz FSB) 495612-B21 Quad-Core IntelÂ® XeonÂ® processor X5460 (3.16 GHz, 120W, 1333MHz FSB) 446085-B21 Quad-Core IntelÂ® XeonÂ® processor L5430 (2.60 GHz, 50W, 1333MHz FSB) 495616-B21 Quad-Core IntelÂ® XeonÂ® processor L5420 (2.50 GHz, 50W, 1333MHz FSB) 495479-B21 Quad-Core IntelÂ® XeonÂ® processor L5410 (2.33 GHz, 50W, 1333MHz FSB) 448369-B21 Quad-Core IntelÂ® XeonÂ® processor E5472 (3.00 GHz, 80W, 1600MHz FSB) 448365-B21 Quad-Core IntelÂ® XeonÂ® processor E5462 (2.80 GHz, 80W, 1600MHz FSB) 463076-B21 Quad-Core IntelÂ® XeonÂ® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) 446079-B21 Quad-Core IntelÂ® XeonÂ® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) 446077-B21 Dual-Core Processors Dual-Core IntelÂ® XeonÂ® processor X5272 (3.40 GHz, 80W, 1600MHz FSB) 448371-B21 Dual-Core IntelÂ® XeonÂ® processor L5240 (3.00 GHz, 40W, 1333MHz FSB) 448373-B21 QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 19
Memory 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit 495604-B21 Low Power 2 GB FBD PC2-5300 2 X 1 GB Low Power Kit 461826-B21 4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 461828-B21 8 GB FBD PC2-5300 2 x 4 GB Low Power Kit 466440-B21 Hard Drives NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. SATA Non-Hot Plug Midline (MDL) Drives (Non-Hot Plug Models Only) HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD 462595-B21 HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21 HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21 SATA Non-Hot Plug Entry (ETY) Drives HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21 NOTE: When purchasing systems with the 500GB Non-Hot Plug SATA drives, please reference the Configuration Information Section of this QuickSpecs to order via Configuration to Order. SATA Hot Plug Midline (MDL) Drives (SAS/SATA Hot Plug Models Only) NOTE: A SAS HBA or Array Controller is required. HP 1TB 3G SATA 7.2K 3.5" MDL HDD 454146-B21 HP 750GB 3G SATA 7.2K 3.5" MDL HDD 458930-B21 HP 500GB 3G SATA 7.2K 3.5" MDL HDD 458928-B21 HP 250GB 3G SATA 7.2K 3.5" MDL HDD 458926-B21 NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller. Please see communication for details: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp? objectID= c01511475 SATA SFF Hot Plug Entry (ETY) Drives HP 160GB 3G SATA 7.2K 3.5" ETY HDD 458945-B21 NOTE: Server BIOS update is required to support 3G SATA drives when configured with embedded SATA controller. Please see communication for details: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp? objectID= c01511475 QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 20
NOTE: SATA hard drives have a 1-year warranty. Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html (Worldwide) http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) SAS Hot Plug 3.5" Midline (MDL) Drives HP 1TB 7.2K 3.5" DP SAS MDL HDD 461137-B21 HP 750GB 7.2K 3.5" DP SAS MDL HDD 461135-B21 SAS Hot Plug 3.5" Enterprise (ENT) Drives HP 400GB 3G 10K 3.5" DP SAS HDD 459508-B21 HP 450GB 3G 15K 3.5" DP SAS ENT HDD 454232-B21 HP 300GB 3G SAS 15K 3.5" SP HDD 431944-B21 HP 300GB 3G SAS 15K 3.5" DP HDD 416127-B21 HP 146GB 3G SAS 15K 3.5" SP HDD 375872-B21 HP 146GB 3G SAS 15K 3.5" DP HDD 384854-B21 HP 72GB 3G SAS 15K 3.5" SP HDD 375870-B21 HP 72GB 3G SAS 15K 3.5" DP HDD 384852-B21 NOTE: The purchase of SAS HBA or array controller is required. NOTE: SAS Enterprise drives have a 3-year warranty Please see the QuickSpecs for Technical Specifications and additional information: hhttp://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html (Worldwide) Hot Plug HDD Backplane Option Hot Plug HDD Backplane 1U 2S Kit 445985-B21 NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. Graphic Cards HP Nvidia Quadro FX1700 512 MB PCI-E 16x Kit 490646-B21 HP Nvidia FX3700 512 MB PCI-E 16x Kit 490062-B21 Optical Drives DVD-ROM Drive (optional) 447889-B21 DVD/CD RW Drive (optional) 447891-B21 Storage Controllers NOTE: The addition of storage controllers for internal hard drive use is intended for use ONLY with the Hot Plug SATA/SAS Model Chassis (P/N 445148-B21). SAS HBA HP 8 Internal Port SAS HBA with RAID NOTE: For use with Hot Plug SAS/SATA models. NOTE: The selection HP 8 Internal Port SAS HBA with RAID requires the purchase of the LowProfile PCI-X Riser Option kit (P/N 452698-B21) NOTE: Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS 347786-B21 QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 21
HP SC44Ge Host Bus Adapter NOTE: PCI-Express SAS HBA. NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. 416096-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.html (8 Internal Port SAS HBA) http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html (SC44Ge HBA) SCSI HBA HP SC11Xe Host Bus Adapter 412911-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.html (SC11Xe HBA) SAS Controllers Smart Array E200 Controller HP Smart Array E200/128 BBWC Controller 411508-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.html (Smart Array E200 Controller) Smart Array E500 Controller HP Smart Array E500/256MB Controller NOTE: Standard RAID 0,1, 1 0. NOTE: Customers can only order one Smart Array E500/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160 G5 server based on battery space. 435129-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html (Smart Array E500 Controller) Smart Array P400 Controller HP Smart Array P400/256 Controller NOTE: Customers can only order one Smart Array P400/256MB Controller and one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160 G5 server based on battery space. 405132-B21 HP Smart Array P400/512 Controller with BBWC NOTE: Customers can only order one Smart Array P400/512MB BBWC Controllers for the HP ProLiant DL160 G5 server based on battery space. 411064-B21 512MB Battery-backed write cache upgrade NOTE: Contains batter and memory module. For Smart Array P400 Controller. 405148-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html (Smart Array P400 Controller) Smart Array P800 Controller HP Smart Array P800/512 BBWC Controller 381513-B21 QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 22
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html (Smart Array P800 Controller) Riser Board Kits HP PCI-X Riser Board Kit NOTE: Replaces the standard Full Height PCI Express slot with a Full Height PCI-X slot. 445986-B21 HP PCI-X L/P Riser Kit NOTE: Replaces the standard Half Height (LP) PCI Express slot with a Half Height (LowProfile) PCI-X slot. 452698-B21 Communications HP NC110T PCI Express Gigabit Server Adapter 434905-B21 HP NC360T PCI Express Dual Port Gigabit Server Adapter 412648-B21 HP NC364T PCI Express Quad Port Gigabit Server Adapter 435508-B21 HP NC373F PCI Express Multifunction Gigabit Server Adapter 394793-B21 HP NC373T PCI Express Multifunction Gigabit Server Adapter 394791-B21 HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter 458492-B21 HP NC510C PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter. 414129-B21 HP NC510F PCIe 10 Gigabit Server Adapter NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510F adapter. 414126-B21 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs HPC Specific Options HP IB 4X DDR PCI-e Dual Port 0 Memory HCA 483513-B21 HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA 483514-B21 HP IB 4X DDR PCI-e Dual Port HCA 409376-B21 HP IB 4X DDR PCI-e DUAL PORT HCA 448397-B21 NOTE: For HPC interconnect adapters please see the HPC Interconnect section of this QuickSpecs. QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 23
Tape Drives NOTE: For the complete listing of Tape Drive offerings, please see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html USB Rack-Mount Tape Drives HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive NOTE: Pre-configured with one DAT 160 USB tape drive. AG703A SAS Rack-Mount Tape Drives NOTE: HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a dedicated SAS HBA for tape. HP StorageWorks 1U SAS Rack-Mount Kit with one LTO-4 Ultrium 1760 NOTE: Pre-configured with one LTO-4 Ultrium 1760 SAS tape drive. EH946A HP StorageWorks 1U SAS Rack-Mount Kit NOTE: Supports up to (2) half-height SAS tape drives. AE459A HP StorageWorks DAT 160 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A) Q1587A HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A) DW085A HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A) EH847A SCSI Rack-Mount Tape Solutions NOTE: SCSI Controller required. HP recommends purchasing the HP SC11Xe HBA (412911-B21) for a dedicated SCSI HBA for tape. HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape Drive (Carbonite) NOTE: Pre-configured with one LTO-2 Ultrium 448 SCSI tape drive. DW028B HP StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920 NOTE: Pre-configured with one LTO-3 Ultrium 920 SCSI tape drive. EH903A HP StorageWorks 3U SCSI Rack-Mount with 1 LTO-4 Ultrium 1840 Tape Drive NOTE: Pre-configured with one LTO-4 Ultrium 1840 SCSI tape drive. EH926A For an up-to-date listing of the latest O/S and software support details for HP Ultrium tape drives, please visit: http://www.hp.com/go/connect Disk-Based Backup RDX Removable Disk Backup HP StorageWorks RDX160 External Removable Disk Backup System NOTE: 160GB of Disk Storage AJ766A HP StorageWorks RDX320 External Removable Disk Backup System NOTE: 320GB of Disk Storage AJ768A HP StorageWorks RDX500 External Removable Disk Backup System NOTE: 500GB of Disk Storage AJ935A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13036_div/13036_div.html D2D Backup HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit NOTE: 2TB of Disk Storage EH924A HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3TB of Disk Storage. EH952A QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 24
HP StorageWorks D2D2503i Backup System NOTE: 3TB of Disk Storage. EH945A HP StorageWorks D2D4004i Backup System EH938A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12651_div/12651_div.html (Worldwide) Tape Autoloaders HP StorageWorks DAT Autoloader HP StorageWorks DAT 72x10 tape autoloader AE313B HP StorageWorks 1/8 G2 Tape Autoloader HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader AK377A HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader AH558A HP StorageWorks 1/8 G2 LTO-2 Ultrium 448 Tape Autoloader AH164A HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount instructions. AH166A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/automation needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs . Tape Libraries HP StorageWorks MSL2024 Tape Library HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library AJ033A HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library AK378A HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library AG115A HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library AH559A HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library AG116A HP StorageWorks MSL4048 Tape Library HP StorageWorks MSL4048 1 Ultrium 920 SAS Drive Library AH560A HP StorageWorks MSL4048 1 Ultrium 960 SCSI Drive Library AG322A HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library AK380A HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library AJ035A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://www.hp.com/go/automation needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs . QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 25
HP StorageWorks 50 Modular Smart Array HP StorageWorks 50 Modular Smart Array 364430-B21 NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies and hot plug fans. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.html (Worldwide) HP StorageWorks 60 Modular Smart Array HP StorageWorks 60 Modular Smart Array 418408-B21 NOTE: Rack-mountable 12-drive (3.5" 3G SAS/1.5G SATA) 2U enclosure with 3Gb/s SAS host connectivity and redundant power supplies. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12627_div/12627_div.html (Worldwide) HP StorageWorks 70 Modular Smart Array HP StorageWorks 70 Modular Smart Array 418800-B21 NOTE: Rack-mountable 25-drive (2.5" 3G SAS/1.5G SATA) 2U enclosure with 3Gb/s SAS host connectivity and redundant power supplies. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12652_div/12652_div.html (Worldwide) High Availability Cluster Options HP Serviceguard for Linux HP Serviceguard Linux for HP ProLiant/x86 Servers Licensed per physical server Includes media and One Year 24x7 Software Support & Updates 463831-B21 HP Serviceguard Linux Oracle Database Toolkit for HP ProLiant/x86 Servers Licensed per cluster Includes media and One Year 24x7 Software Support & Updates 463833-B21 HP Serviceguard Extension for SAP on Linux for HP ProLiant/x86 Servers Licensed per physical server Includes media and One Year 24x7 Software Support & Updates 463834-B21 HP Serviceguard Linux Extended Distance Cluster (XDC) for HP ProLiant/x86 Servers Licensed per physical server Includes media and One Year 24x7 Software Support & Updates 463835-B21 NOTE: The above is not a complete list of all HP Serviceguard for Linux product numbers For a detailed list of supported configuration/certification options for HP Serviceguard for Linux please refer to the HP Serviceguard for Linux Configuration & Ordering Guide available at: http://www.hp.com/go/sglx/info . NOTE: HP Serviceguard for Linux products running on x86 platforms now include one year of 24 x 7 Software Technical Support and Updates. Please see the Support Information section of the HP Serviceguard for Linux QuickSpecs for details. NOTE: For additional information including a complete list of Product Numbers for HP Serviceguard for Linux, please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 26
(Worldwide) StorageWorks Options StorageWorks Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html HP StorageWorks FC2142SR 4Gb PCI-e HBA A8002A HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA A8003A HP StorageWorks FC1142SR 4Gb PCI-e HBA AE311A HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA AE312A HP StorageWorks FC2143 4Gb PCI-X 2.0 - to Fibre Channel HBA AD167A HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA AD168A HP StorageWorks 81E 8Gb SP PCI-e FC HBA AJ762A HP 82E 8Gb Dual-port PCI-e FC HBA AJ763A HP 82Q 8Gb Dual Port PCI-e FC HBA AJ764A StorageWorks SCSI HBA HP U320e SCSI Host Bus Adapter NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape libraries to ProLiant servers AH627A HP StorageWorks FC2243 4Gb PCI-X 2.0 DC HBA AD168A Uninterruptible Power Systems - Rack HP UPS R1500 G2 UPS HP, R1.5k VA UPS, 1U,NA AF419A HP, R1.5kVA UPS, 1U, INTL AF418A HP, R1.5kVA UPS, 1U, JPN/TW AF421A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13130_div/13130_div.html (Worldwide) NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13129_div/13129_div.html (Worlwide) USB Options HP 1GB USB 2.0 Floppy Drive Key 442085-B21 USB 1.44-MB External Diskette Drive DC141B USB Floppy Drive DC361B HP USB-P/S2 Mouse DC369A HP Keyboard (USB) standard 2004 DT528A#xxx HP USB Internal Cable Kit 451363-B21 QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 27
HP Rack 10000 G2 Series (Carbon/Graphite Metallic) 10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet AF034A 10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet AF038A 10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet AF044A 10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet AF045A NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed. NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html (Worldwide) NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower . HP KVM Switch Options 2x1x16 IP Console Switch with Virtual Media AF601A 4x1x16 IP Console Switch with Virtual Media AF602A 2x16 Server Console Switch with Virtual Media AF600A PS/2 Virtual Media Interface Adapter, 1 pack NOTE: Requires PS/2 and one USB port on server. AF604A HP Server Console Switch (KVM), 0 x 1 x 8 port 336044-B21 HP Server Console Switch (KVM), 0 x 2 x 16 port 336045-B21 PS/2 Interface Adapter, 1 pack 262588-B21 PS/2 Interface Adapter, 8 pack 262587-B21 HP 1x4 Console Switch AF611A HP PS2 Server Console Cable, 6 foot, 2-Pack AF612A HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals. AF613A NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm HP Serial Console Server Options HP 16 Port Serial Console Server (worldwide) AF101A HP 48 Port Serial Console Server (worldwide) AF102A Serial Adapter, RJ45-D89 DCE Female, 1-pack AF103A Serial Adapter, RJ45-D89 DCE Female, 8-pack AF110A NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 28
Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service 13-Hour x 5-Day Coverage, 3 Years, Electronic U9509E 24-Hour x 7 Day Coverage, 3 Years, Electronic U9510E Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years, Electronic U9508E Hardware Services 6-Hour Call to Repair On-Site Service Hardware Installation, Electronic U9520E NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack QuickSpecs HP ProLiant DL160 Generation 5 Options DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 29
HP ProLiant DL160 G5 (all models) NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 1GB (2x512MB) or 2GB (2 x 1GB) depending on model, PC2-5300 Fully Buffered DIMM memory, with Advanced ECC. Maximum Memory Up to 32GB memory is available with the optional installation of PC2-5300 Fully Buffered DIMM memory kits. NOTE: Memory should be installed in pairs and matched for optimum performance. NOTE: Chart does not represent all possible memory configurations. Memory Slot 1 2 3 4 5 6 7 8 Standard (1 GB) 512 MB Empty 512 MB Empty Empty Empty Empty Empty Standard (2 GB) 1 GB Empty 1 GB Empty Empty Empty Empty Empty Maximum (64GB) 8 GB 8 GB 8 GB 8 GB 8 GB 8 GB 8 GB 8 GB Following are memory options available from HP: 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit 495604-B21 Low Power 2 GB FBD PC2-5300 2 X 1 GB Low Power Kit 461826-B21 4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 461828-B21 8 GB FBD PC2-5300 2 x 4 GB Low Power Kit 466440-B21 QuickSpecs HP ProLiant DL160 Generation 5 Memory DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 30
1-4 Four Non-hot plug SATA or four 3.5" Hot-plug SAS/SATA hard drive bays A Optional DVD-ROM, or DVD/CD RW Drive Support Removable Media Quantity Supported Position Supported Controller DVD-ROM Up to 1 A Integrated IDE (ATAPI) (optional) DVD/CD RW Up to 1 A Integrated IDE (ATAPI) (optional) Hard Drives NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA or Controller technical specifications for details. SATA Non-Hot Plug Midline (MDL) Drives 3.5" Quantity Supported Position Supported Controller 250GB 1.5G SATA 7.2K 500GB 1.5G SATA 7.2K 750GB 1.5G SATA 7.2K Up to 4 1-4 HP Embedded SATA RAID Controller NOTE: Transfer rate: 1.5 Gb/s SATA SATA Non-Hot Plug Entry (ETY) Drives 3.5" Quantity Supported Position Supported Controller 160GB 1.5G SATA 7.2K Up to 4 1-4 HP Embedded SATA RAID Controller NOTE: Transfer rate: 1.5 Gb/s SATA SATA Hot Plug Midline (MDL) Drives 3.5" NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. Quantity Supported Position Supported Controller 160GB SATA 7.2K 250GB SATA 7.2K 500GB SATA 7.2K 750GB SATA 7.2K 1TB SATA 7.2K Up to 4 1-4 HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1 NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS HP Smart Array P400 Controller HP Smart Array P800 Controller SATA Non-Hot Plug Enterprise (ENT) Drives 3.5" Quantity Supported Position Supported Controller 160GB 1.5G SATA 7.2K Up to 4 1-4 HP Embedded SATA RAID Controller NOTE: Transfer rate: 1.5 Gb/s SATA SAS Hot Plug 3.5"Midline (MDL) Drives NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. QuickSpecs HP ProLiant DL160 Generation 5 Storage DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 31
Quantity Supported Position Supported Controller 1TB 3G 7.2K 750 3G 7.2K Up to 4 1-4 Embedded SATA with integrated SATA RAID 0,1 HP Smart Array E200/128 BBWC Controller HP Smart Array P400 Controller HP Smart Array E500/256MB Controller HP Smart Array P800 Controller SAS Hot Plug 3.5" Enterprise (ENT) Drives NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only. Quantity Supported Position Supported Controller 72GB 3G 15K 146GB 3G 15K 300GB 3G 15K 450GB 3G 15K 400GB 3G 10K Up to 4 1-4 HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1 NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS HP Smart Array P400 Controller HP Smart Array P800 Controller External Storage Quantity Supported Position Supported Controller 20 Modular Smart Array Up to 2 per SA- 6402 Up to 4 per SA- 6404 External Smart Array 6402/128 Controller Smart Array 6404/256 Controller Smart Array 642 Controller 50 Modular Smart Array Up to 2 External Smart Array 6402/128 Controller Smart Array 6404/256 Controller Smart Array 642 Controller 60 HP StorageWorks Modular Smart Array Up to 8 External HP Smart Array P800/512 BBWC Controller 70 HP StorageWorks Modular Smart Array Up to 8 External HP Smart Array P800/512 BBWC Controller QuickSpecs HP ProLiant DL160 Generation 5 Storage DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 32
Tape and Disk-Based Backup NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide) NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10809.html (Worldwide) NOTE: For complete listing of tape drive offerings see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard drive cage would mean drive bay 8 is deactivated. Position Supported Controller Controller/HBA Option Kit Part Number HP StorageWorks SCSI Tape Drives, External LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 1U Rack-Mount Kit 3U Rack-Mount Kit External HP SC11Xe Host Bus Adapter 412911-B21 HP StorageWorks USB Tape Drives, External DAT 40 USB DAT 72 USB DAT 160 USB 1U USB Rack-Mount Kit External USB 2.0 Port N/A HP StorageWorks SAS Tape Drives, External DAT 160 SAS LTO-2 Ultrium 448 SAS LTO-3 Ultrium 920 SAS LTO-4 Ultrium 1760 SAS LTO-4 Ultrium 1840 SAS 1U Rack-Mount Kit 3U Rack-Mount Kit External HP SC44Ge Host Bus Adapter 416096-B21 HP StorageWorks SCSI Tape Automation, External HP SC11Xe Host Bus Adapter 412911-B21 QuickSpecs HP ProLiant DL160 Generation 5 Storage DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 33
External DAT 72x10 Autoloader 1/8 G2 Autoloader MSL2024 MSL4048 HP U320e SCSI Host Bus Adapter NOTE: Recommended for MSL tape libraries. AH627A HP StorageWorks SAS Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 External HP SC44Ge Host Bus Adapter NOTE: Please visit: http://www.hp.com/go/connect for details about minimum SAS controller firmware version and SAS cabling requirements. 416096-B21 HP StorageWorks Fibre Tape Automation, External MSL2024 MSL4048 MSL8096 MSL6000 External Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for detailed connectivity information. N/A HP StorageWorks RDX Removable Disk Backup System, External RDX160 RDX320 RDX500 External USB 2.0 port N/A HP StorageWorks D2D Backup Systems D2D120 D2D130 D2D2503i D2D4004i External Embedded Network Controller N/A QuickSpecs HP ProLiant DL160 Generation 5 Storage DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 34
Operational Input Voltage Range (Vrms) 90Vac to 264Vac full range Frequency Range (Nominal) (Hz) 47 Hz to 63 Hz Nominal Input Voltage (Vrms) 100 115 200 220 230 240 Max Rated Output Wattage Rating 653.10 653.19 653.08 652.96 653.08 652.96 Nominal Input Current (A rms) 8.55 7.31 4.12 3.77 3.6 3.46 Max Rated Input Wattage Rating (Watts) 855 840.72 824.12 827.5 806.3 805.71 Max. Rated VA (Volt-Amp) 990 990 990 990 990 990 Efficiency (%) 76.39 77.69 79.25 78.91 81 81.04 Power Factor 0.998 0.997 0.983 0.976 0.973 0.969 Leakage Current (mA) <3.5mA <3.5mA <3.5mA <3.5mA <3.5mA <3.5mA Maximum Inrush Current (A peak) 60A 60A 60A 60A 60A 60A Maximum Inrush Current Duration (mS) 1mS 1mS 1mS 1mS 1mS 1mS QuickSpecs HP ProLiant DL160 Generation 5 Power Specifications DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 35
Power ProLiant DL160 G5 Fully Configured 115V/60Hz 220V/50Hz Fully Loaded System Input Wattage (W) 651 638 Fully Loaded System Input Current (A rms) 5.7 3.0 Fully Loaded System Thermal (BTU- Hr) 2218 2174 Fully Loaded System VA (Volt-Amp) 657 657 System Leakage with all power supplies loaded (mA) 1.58 3.03 System Inrush Current with all power supplies loaded (A) 19 37 Power cord requirements Nema 5-15P to IEC320-C13 IEC320-C13 to IEC320-C14 NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD- ROM, and (2) PCI cards. Power Cord AF556A Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately. If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix . QuickSpecs HP ProLiant DL160 Generation 5 System Specifications DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 36
System Unit Dimensions (H x W x D) (with bezel) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) Weight (approximate) Maximum (all hard drives, power supplies, and processors installed) 37.00 lb (16.78 kg) Minimum (one hard drive, power supply, and processor installed) 30.00 lb (13.69 kg) Input Requirements (per power supply) Rated Line Voltage 90 to 140 VAC 180 to 264 VAC Rated Input Current 7.31A at 115VAC 3.6A at 230VAC Rated Input Frequency 47 to 63 Hz Rated Input Power 855W (at 100 VAC), 840.72W (at 200 VAC) Power Specifications To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: http://h30099.www3.hp.com/configurator/calc/Power% 20Calculator Catalog.xls - Click on the system of interest. Example: DL160 G5 - Follow the instructions of the next screens. Power Supply Output (per power supply) Rated Steady-State Power 653.10W (at 100 VAC), 653.08W (at 200 VAC) System Inlet Temperature Operating 50Â° to 95Â° F (10Â° to 35Â° C) at sea level with an altitude derating of 1.8Â°F per every 1000 ft (1.0Â°C per every 305 m) above sea level to a maximum of 10,000 ft (3050 m), no direct sustained sunlight. Maximum rate of change is 18Â°F/hr (10Â°C/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 86Â°F (30Â°C). Non-operating 40Â° to 140Â° F (-40Â° to 60Â° C) Maximum rate of change is 36Â°F/hr (20Â°C/hr). Relative Humidity (non-condensing) Operating 10% to 85% relative humidity (Rh), 82.4Â°F (28Â°C) maximum wet bulb temperature, non- condensing. Non-operating 10% to 95% relative humidity (Rh), 101.7Â°F (38.7Â°C) maximum wet bulb temperature, non-condensing. Altitude Operating 10,000 ft (3050 m). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min). QuickSpecs HP ProLiant DL160 Generation 5 Technical Specifications DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 37
Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Acoustic Noise Listed are the declared A-Weighted sound power levels (L WAd ) and declared average bystander position A-Weighted sound pressure levels (L pAm ) when the product is operating in a 23Â°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle L WAd 6.86 L pAm 52.36dBA Operating L WAd 6.89 L pAm 52.60dBA Emissions Classification (EMC) FCC Rating Class A Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. Non-Hot Plug SATA Hard Drives 160-GB 7.2K 458947-B21 Capacity 160,041 MB Height 1.028 in (2.61 cm) Width 4.0 in (10.16 cm) Depth 5.787 in (147.0 mm) Interface SATA ATA Transfer Rate Synchronous (Maximum) 1.5Gb/s Seek Time (typical reads, including settling) Single Track 0.9 ms Average 9.0 ms Full-Stroke 17.8 ms Rotational Speed 7,200 rpm Physical Configuration Bytes/Sector 512 Logical Blocks 312,581,808 Operating Temperature 41Â° to 131Â° F (5Â° to 55Â° C) QuickSpecs HP ProLiant DL160 Generation 5 Technical Specifications DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 38
Embedded NC105i PCIe Gigabit Server Adapter Network Interface Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver. Data Transfer Method Compliant to x1 PCIe Specification Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s 10Base-T (Full-Duplex) 20 Mb/s 100Base-TX (Half- Duplex) 100 Mb/s 100Base-TX (Full- Duplex) 200 Mb/s 1000Base-TX (Half and Full-Duplex) 2000Mb/s Connector RJ-45 connector Cable Support Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard Category 5 UTP Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. Â© Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less. QuickSpecs HP ProLiant DL160 Generation 5 Technical Specifications DA - 12902 Worldwide QuickSpecs â Version 19 â 1/26/2009 Page 39