Nokia 6085 User Manual
Nokia 6085 User Guide 9251038 Issue 1 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 1 Wednesday, No vember 29, 2006 2:00 PM
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that t his RM-198 product is in compliance with the essential requi remen ts and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. The crossed-out wheeled bin means th at within the European Union the product must be take n to sepa rate collection at the product end- of-life. This applies to your devi ce but also to any e nhancements marked with this symbol. Do not di spose of these products as unsorted municipal waste. For more informatio n, see product Eco-Declaration or countr y spec ific inf o rmation at www.nokia.com. Copyright é 2006 Nokia. All rights reserved. Nokia, Nokia Connecting People, Pop-Port, PC Suite, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Nokia tune is a sound mark of Nokia Corporation. US Patent No 5818437 and other pendin g patents. T9 text input software Copyright é 1999-2006. T egic Communica tions, Inc. All rig hts reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for per sonal and noncommercial use in connection with inform ation which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <h ttp://www.mpegla.com>. 0434 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 2 Wednesday, No vember 29, 2006 2:00 PM
Nokia operates a policy of continuous devel opment. Nokia reserves the right to make changes and improvements to any of the produ cts described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is ". Except as required by applicable law, no warranties of any kind, either express or imp lied, including, but not limited to, the implied warranties of merchantability and fitness for a part icular purpose, are made in relation to the accuracy, reliability or contents of this documen t. Nokia reserves the right to revise this document or withdraw it at an y time without prior notice. The availability of particular pr oducts may vary by region. Please check with the N okia dealer nearest to you. EXPORT CONTR OLS This device may contain co mm odities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited. 9251038/Issue 1 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 3 Wednesday, No vember 29, 2006 2:00 PM
4 Contents For your safety.......................... 6 General information ................. 9 Access codes ............. ..................... .......... 9 Copyright protection ........................ .. 10 Configuration settings service ........ 10 Download content and applications 11 Nokia support and contact information .................... ..................... .. 11 1. Get started ........................ . 12 SIM card and battery installation .. 12 Charge the battery....... ..................... .. 13 Memory card installation ............... .. 14 Switch the phone on and off ......... .. 15 Open the fold ..... ........................... ....... 15 Normal operating position ............... 16 Wrist strap ..... ........................... ............ 17 2. Your phone ......................... 18 Keys and parts.... ...................... ............ 18 Standby mode .......................... ............ 19 Indicators and icons .................... ....... 21 Keypad lock (keyguard) ......... ............ 22 3. Call functions. .................... 24 Make a call .... ..................... .................. 24 Speed dialing . ..................... .................. 24 Enhanced voice dia ling............... ....... 24 Answer or reject a call ................ ....... 25 Options during a call ........................ .. 26 4. Phone menus........... ........... 27 Menu views ......................... .................. 27 Access a menu funct ion ........ ............ 27 5. Messaging .......................... 28 Text messages ............................... ....... 28 SIM messages ..................... .................. 31 Multimedia messages ................. ....... 31 Nokia Xpress audio messaging ........ 35 Instant messaging .................... ........... 36 E-mail application ......................... ..... 40 Voice messages ......... ........................... 43 Info messages ................. ..................... 44 Service commands ......... ..................... 44 Delete messages ....................... ........... 44 Message settings. ........................... ..... 45 6. Contacts ................... ........... 49 Search ......... ........................... ................ 49 Save names and phone numbers .... 49 Save numbers, items, or an image . 49 Copy a contact..... ........................... ..... 50 Edit contact details . ...................... ..... 50 Delete contacts or de tails................. 50 Business cards ...... ..................... ........... 51 Settings ....... ...................... ..................... 51 Groups ......... ........................... ................ 51 Speed dialing ........ ........................... ..... 51 Service and my numbers ................... 52 7. Call log ..................... ........... 53 Positioning information .................... 53 8. Settings ............................... 55 Profiles ........................ ........................... 55 Themes ........ ........................... ................ 55 Tones............ ...................... ..................... 56 Display .................... ..................... ........... 56 Time and date ........... ...................... ..... 58 My shortcuts ................... ..................... 58 Connectivity .............. ........................... 60 Call .......... ..................... ........................... 65 Phone................ ...................... ................ 66 Enhancements ..... ........................... ..... 67 Configuration .................. ..................... 67 Security .................. ........................... ..... 68 Restore factory setting s ............... ..... 69 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 4 Wednesday, No vember 29, 2006 2:00 PM
5 Phone software updates ......... ........... 70 9. Operator menu ................... 71 10. Gallery .............................. 72 Format memory card .......................... 72 11. Media ............................... 73 Camera ................... ..................... ........... 73 Media player .............................. ........... 74 Music player .................... ...................... 75 Radio . ...................... .......................... ...... 76 Recorder . .......................... ...................... 78 Equalizer................. ..................... ........... 79 Stereo widening ........................ ........... 79 12. Push to talk ..................... 80 Connect and disconnect .................... 80 Make and receive a PTT call ............. 81 Callback requests ........... ...................... 83 Add a one-to-one contact ..... ........... 84 PTT channels ... ........................... ........... 84 PTT settings ..... ...................... ................ 85 13. Organizer.......................... 87 Alarm clock...................... ...................... 87 Calendar ................. .......................... ...... 88 To-do list ................ .......................... ...... 89 Notes ............ ..................... ...................... 89 Calculator ........ ...................... ................ 89 Timer ................. ...................... ................ 90 Stopwatch ....... ........................... ........... 90 14. Applications ..................... 91 Games ............................... ...................... 91 Collection .... ........................... ................ 91 15. Web..................... .............. 93 Technology background ...... ............... 93 Service provider .................... ............... 93 Access service ................... .................... 93 Browse ..................... ...................... ......... 94 Security settings ......... ..................... .... 96 Bookmarks ......... ........................... ......... 96 Download settings ............... ............... 97 Service inbox ......... ........................... .... 97 Cache memory............. ......................... 98 Browser security .............. .................... 98 16. SIM services .................. 101 17. Computer connectivity . 102 USB data storage ........................ ...... 102 Nokia PC Suite.. ........................... ...... 102 EGPRS, GPRS, HSCSD, and CSD .... 102 Data communication applications 103 Bluetooth ................ ........................... . 103 18. Enhancements .............. . 104 19. Battery infor mation ...... 105 Charging and discharging .. ............ 105 Nokia battery auth entication guidelines........... ..................... ............ 106 Care and maintenance ........ 108 Additional safety information ..... ..................... 109 Index .................................... . 113 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 5 Wednesday, No vember 29, 2006 2:00 PM
For your safety 6 For your safety Read these simple guidelines. Not follow ing them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wi reless phone use is pr ohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always kee p your hands free to op erate the vehicle while driving. Your first co nsideration while driving should be road safety. INTERFERENCE All wireless phones may be suscepti ble to interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any restrictions . Switch the phone off near medical equipment. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless de vices can cause interference in aircraft. SWITCH OFF WHEN REFUELING Do not use the phone at a refueling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the phone where blasting is in progress. USE SENSIBLY Use only in the nor mal posi tion as explained in the product documenta tion. Do no t touch the ante nna unneces sarily. QUALIFIED SERVICE Only qualified personnel may in stall or repair this product. ENHANCEMENTS AND BATTERIE S Use only approved enhancements and batterie s. Do not connect incompatible products. RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 6 Wednesday, No vember 29, 2006 2:00 PM
For your safety 7 WATER-RESI STANCE Your phone is not water-resi stant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information st ored in your phone. CONNECTI NG TO OTHER DEVICES When connecting to any other device, read its user gui de for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on an d in service. Press the end key as many times as needed to clear th e display and return to the start screen. Enter the emergency number , then press the call key. Give your location. Do not end the call until given permission to do so. â About your device The wireless device described in this guid e is approved for use on the EGSM 850, 900, 1800, and 1900 networks. Contact your service provider for more information about networks. When using the features in this device , obey all laws and respect privacy and legitimate rights of others, including copyrights. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Warning: To use any features in this de vice, other than the a larm clock, the device must be switched on. Do not switch the device on when wireless device use may caus e interference or danger. â Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explai n what charges will apply. Some networks may have limitations that affect how yo u can use network services. For instance, some networks may not support all langua ge-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, th ey will not appear on your device menu. Your RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 7 Wednesday, No vember 29, 2006 2:00 PM
For your safety 8 device may also hav e been specially configured. This configurat ion may include changes in menu names, m enu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device , such as multimedia messaging s ervice (MMS), browsing, e-mail application, instant messagi ng, remote synchronization, and content dow nloadi ng using the browser or MMS, require network support for these technologies. â Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, i nstant messages, e-mail, cal endar, to-do notes, and Java TM games and applications. Use of one or more of these features may reduce the memory available for the re maining features sharing memory. For example, sa ving many Java applicatio ns may use all of th e available memory. Your devi ce may disp lay a message that th e memory is ful l when you try to use a shared memory feature. In this case, d elete some of the information or entries stored in the shared memory features before continuing. Some of the features , such as text messages may have a certain amount of memory specially allotted to them in ad dition to the memory shared with other featu res. â Enhancements, batt eries, and chargers Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 charger. This device uses BL-5C batteries. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular m odel. The use of any other types may invalidate any approval or wa rranty, and may be dangerous. For availability of approved enhancemen ts, please check with your de aler. A few practical rules about a ccessories and enhancements. ⢠Keep al l access ories a nd enhancements out of the reach of small children. ⢠When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. ⢠Check regularly that enhancements in stalled in a vehicle are mounted and are operating properly. ⢠Installation of any complex car enhanc ements must be made by quali fied personnel only. RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 8 Wednesday, No vember 29, 2006 2:00 PM
General information 9 General information Congratulations on your purchase of this Nokia mobile phone. Some of its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. â Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see âÂÂSecurity,â p. 68. If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for five minutes, and enter the code again. PIN codes The personal identification numbe r (PIN) code and the universal personal identification number (UPIN) code (four to eight digits) help to protect your SIM card against unauthorized use. See âÂÂSecurity,â p. 68. The PIN code is usually supplied with the SIM card. To set the phone to request the PIN code, see âÂÂSecurity,â p. 68. The PIN2 code (four to eight digits) may be supplied with the SIM card and is required for some functions. The module PIN is required to access the information in the security module. See âÂÂSecurity module,â p. 98. The module PIN is supplied with the SIM card if the SIM card has a security module in it. The signing PIN is required for th e digital signature. See âÂÂDigital signature,â p. 100. The signing PIN is supplied with the SIM card if the SIM card has a security module in it. RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 9 Wednesday, No vember 29, 2006 2:00 PM
General information 10 PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (eight digits) is required to change a blocked PIN code and UPIN code, respec tively. The P UK2 code is requ ired to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your service provider for the codes. Barring password The barring password (four digits) is required when using Call barring service . See âÂÂSecurity,â p. 68. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider for assistance. â Copyright protection Copyright protections may pr event some images, music (including ringing tones), and other content from being copied , modified, transferred or forw arded. â Configuration settings service To use some of the network services , such as mobile Internet services, MMS, or remote Internet server synchronization, your phone needs the correct configuration settings. You ma y be able to receive the settings directly as a configuration message. After receiving the settings, you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability of the settings, co ntact your service provider. When you ha ve received a configuration message, Configuration sett. received is displayed. To save the settings, select Show > Save . If the phone requests Enter settings' PIN: , en ter the PIN code for the settings, and select OK . To receive the PIN code, contact th e service provider who supplies the settings. If no settings are saved yet, these setti ngs are saved a nd set as RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 Wednesday, November 29 , 2006 2:00 PM
General information 11 default configuration settings. Otherwise, the phone asks, Activate saved configuration settings? To discard the receiv ed settings, select Show > Discard . To edit the settings, see âÂÂConfiguration,â p. 67. â Download content and applications You may be able to download content, such as themes, tones, and video clips, to the phone (network service). Select the download function (for example, in the Gallery m e n u ) . T o a c c e s s t h e downlo ad function, see the respective menu descriptions. For av ailability of different services, pricing, and tariffs, contact your service provider. Important: Use only services that you trus t and that offer adequate security and protection against harmful software. â Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest additional information, downloa ds, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contac t customer service, check the list of local Nokia Care contact cente rs at www.nokia.com/customerservice. For maintenance services, ch eck your nearest Nokia Care s ervices location at www.nokia.com/repair. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 Wednesday, November 29 , 2006 2:00 PM
Get started 12 1. Get started â SIM card and battery installation Always switch the device off, and disconnect the charger before removing the batter y. Keep all SIM cards out of the reach of small children. For availability and information on usin g SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. The SIM card and its contacts can ea sily be damaged by scratches or bending, so be careful when handlin g, inserting, or removing the card. To install the SIM card: 1. Press firmly and slide the top of the back cover to release it; then remove the back cover by lifting it from the phone. 2. After you have removed the back cover, insert your fingernail under the battery, and lift it as shown. 3. Place a fingernail in the middle of the metal SIM card holder. Then, unlatch and swing the SIM card holder open. 4. Insert the SIM card into the holder as shown, beveled co rner first, with the gold-colored contacts on the SIM card face up (away from the phone). 5. Swing the SIM card holder closed. The gold-colored contacts on the SIM card meet the gold-colored contac ts on the inside of the phone. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 12 Wednesday, November 29 , 2006 2:00 PM
Get started 13 Gently press the SIM card holder into the phone until it clicks into place. 6. Replace the battery, by positioning it (with the label side facing up), so the gold-colored contacts match up with those on the phone. Slide the battery in until it snaps into place. 7. Slide the back cover until it locks into place. â Charge the batter y 1. Connect the charger to a standard wall outlet. 2. Insert the charger plug into the round jack in the bottom of the phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. 3. Disconnect the charger from the phone when the battery is fully charged. You can use the phone while the charger is connected. The charging time depends on the charger and the battery used. For example, charging a BL-5C battery with the AC -3 charger takes approximately 2 hours and 20 minutes while the phone is in the standby mode. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 13 Wednesday, November 29 , 2006 2:00 PM
Get started 14 â Memory card installation Use only compatible microS D cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and th e device and corrupt data stored on the card.. You can use a memory card to extend the memory of the Gallery . See âÂÂGallery,â p. 72. You can insert or change the memory card without turning the phone off. Important: Do not remove the memory card in the middle of an operation when the card is being a ccessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To insert a memory card, use a fingernail as a lever, place it in the recessed area of the memory card holder and swing the holder open (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted and that the gold-colored contacts on the card are facing upwards. Cl ose the memory card holder (3). You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in the Gallery . To remove the memory card, use a finger nail as a lever. Place it in the recessed area of the memory card holder and swing the holder open. Push gently with a finger nail against the card to loosen it from the holder. Then pull the card out. Close the memory card holder. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 14 Wednesday, November 29 , 2006 2:00 PM
Get started 15 To format the memory card, see âÂÂFormat memory card,â p. 72. â Switch the phone on and off Press and hold the end key until the phone switches on or off. If the phone asks for a PIN, enter the code, and select OK . Plug and play service When you turn on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network servic e). Confirm or reject the query. See Connect to service provider support in âÂÂConfiguration,â p. 67 and âÂÂConfiguration settings service,â p. 10. â Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 15 Wednesday, November 29 , 2006 2:00 PM
Get started 16 â Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna . Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the devi ce is s witched on. Contact with the antenna affects call quality and ma y cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating t h e device optimizes the antenna performance and the battery life. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 16 Wednesday, November 29 , 2006 2:00 PM
Get started 17 â Wrist strap Remove the back cover from the phone and thread a strap as shown in the picture. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 17 Wednesday, November 29 , 2006 2:00 PM
Your phon e 18 2. Y our phone â Keys and parts ⢠Earpiece (1) ⢠Main display (2) ⢠Left, middle, and right selection keys (3) ⢠Four-way navigation key (4) ⢠Call key (5) ⢠End key ends calls (short keypress) and turns phone on and off (long keypress) (6) â¢K e y p a d ( 7 ) ⢠Camera lens (8) ⢠Mini display (9) ⢠Memory card holder (10) ⢠Loudspeaker (11) ⢠Microphone (12) ⢠Pop-Port connector TM (13) ⢠Charger connector (14) ⢠Camera release key (15) ⢠Volume is activated by volume down/up key (short keypress ), voice dialing is activated by RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 18 Wednesday, November 29 , 2006 2:00 PM
Your phone 19 volume down key (long keypress) and Push to talk (PTT) is activated by volume up key (long keypress) (16) â Standby mode When you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone. ⢠Network signal strength (1) ⢠Battery strength indicator (2) ⢠Clock (3) â if the time is set to appear on the display. See âÂÂTime and date,â in âÂÂSettings,â p. 58. ⢠The name of the service provider or the operator logo (4) ⢠Calendar (5) â the date is displaye d if it is set to appear on the display and the active standby is not set. See âÂÂAct ive standby mode,â p. 20 and âÂÂTime and date,â p. 58. ⢠Active standby (6). See âÂÂActive standby mode,â on p. 20. ⢠The left selection key (7) is Go to or a shortcut to another function. See âÂÂLeft selection key,â p. 58. ⢠The middle selection key (8) mode is Menu . ⢠The right selection key (9) may be Names to access the list of contacts in the Contacts menu, an operator spec ific name to access an operator specific Web site, or a shortcut to a function that you selected. See âÂÂRight selection key,â p. 59. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 19 Wednesday, November 29 , 2006 2:00 PM
Your phon e 20 Active standby mode In the active standby mode, the phone can display separate content item windows, such as general indicators and operator logo (1), shortcuts (2), audio functions (3), and the calendar (4). To select whether the active standby is shown, see Active standby in âÂÂStandby mode settings,â p. 56. The active standby is in passive mode when the middle selection key (5) is Menu ; you can only view content. To activate the navigation mode and scroll through the content, use the navigation key. To change the ke y for accessing the navigation mode, see Active standby key in âÂÂStandby mode settings,â p. 56. When the arrow indicators are shown, you ca n scroll the item left and right. To personalize and organize the active standby conte nt, select Options and select a corresponding option. See âÂÂStandby mode settings,â p. 56. To exit the navigation mode, select Exit . If no keys are pressed afte r a certain period of time, the phone au tomatically returns to the passive mode. Content items in navigation mode Shortcut bar â To select a shortcut, scroll to the function you want and select it. To change or organize th e shortcuts when in the navigation mode, select Options > Personalise . Radio and Music â To turn on the radio or the music player, scroll to and select it. To change a track in th e music player, scroll down or up. To start the radio channel search, scroll and hold left or right. Calendar â To view todayâÂÂs notes, select the one you want. To view the notes for the previous or next days, scroll left or right. My note â To enter a note, select the content window , write your note, and save it. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 20 Wednesday, November 29 , 2006 2:00 PM
Your phone 21 Countdown timer â To start the coun tdown timer, select the content item. T he rem ainin g time wi th a no te is s hown. Gener al indi cat ors â To show standby indicators, such as date, cell info display, info messages, PTT default group name, and closed user group index. The date is shown if the calendar is not selected as active st andby content. Standby mode shortc uts To access the list of dialed numbers, press the call key once. See âÂÂMake a call,â p. 24. To call your voice mailbox (network se rvice) when you have saved your voice mailbox number in th e phone, press and hold 1 . To connect to a browser service, press and hold 0 . To set shortcut functions for the navigation key, see Navigation key in âÂÂMy shortcuts,â p. 58. To make a call by pressing a nu mber key with an assigned phone number, see âÂÂSpeed dialing,â p. 24. To toggle between the General profile and the Silent profile, press and hold # . â Indicators and icons Your phone has two types of ide ntifiers: indicators and icons. Indicators See âÂÂStandby mode,â p. 19 for information on indicators. Icons Icons are graphical representations of a specific item or situation. The following list describes each icon. You have unread messages in the Inbox folder. You have unsent, canceled, or failed messages in the Outbox folder. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 21 Wednesday, November 29 , 2006 2:00 PM
Your phon e 22 The phone registere d a missed call. You have received one or several instant messages, and you are connected to the instant messaging service. The keypad is locked. The alarm clock is set to On . The phone does not ring for an incoming call or text message. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to the GPRS or EGPRS network. / A GPRS or EGPRS connection is established. / The GPRS or EGPRS connection is suspended (on hold), for example, if there is an incoming or outgoing call during an EGPRS or GPRS dial-up connection. A Bluetooth connection is active. If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number. The loudspeaker is activated, or the music stand is connected to the phone. Calls are limited to a closed user group. The timed profile is selected. â Keyp ad lock (keyguard) The keyguard disables your keypad to prevent accidental keypresses. ⢠To lock th e keypad, se lect Menu , and press * within 3.5 seconds. ⢠To unlock the keypad, select Unlock , and press * within 1.5 seconds. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 22 Wednesday, November 29 , 2006 2:00 PM
Your phone 23 ⢠To enable automatic keyguard, select Menu > Settings > Phone > Automatic keyguard > On . Set the delay in minutes and seconds in which the keypad locks. If the Security keyguard is set to On , enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked. When the keyguard is on, calls still may be possible to the official emergency number programmed into yo ur device. Enter the e mergency number and press the call key. For information about Security keyguard , see âÂÂPhone,â p. 66. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 23 Wednesday, November 29 , 2006 2:00 PM
Call functions 24 3. Call functions â Make a call 1. Enter the phone number, including the area code. To delete an incorrect character, select Clear . For international calls, press * twice for the international prefix (the character replaces the international access code); and then enter the country code, the area code with out the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key, or select Options > End call . â Speed dialing Assign a phone number to one of the speed dialing keys, 2 to 9. Call the number by one of the following ways: ⢠Press a speed dialing key, and then press the call key. â¢I f Speed dialling is set to On , press and hold a speed dialing key until the call is started. See Speed dialling in âÂÂCall,â p. 65. â Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. A voice c ommand is added automatically to all entries in the contact list of the phone. Make a voice dialing call If an application is sending or re ceiving data using a packet data connection, end the application before you use voice dialing. Voice commands are language-dependent. To set the language, see V oice recognition language in âÂÂPhone,â p. 66. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 24 Wednesday, November 29 , 2006 2:00 PM
Call functions 25 Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and h old the right selection key. A short tone is played, and Speak now is displayed. If you are using a compatible headse t with the headset key, press and hold the headset key to start the voice dialing. 2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. Th e phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and sele ct to dial the entry. Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in âÂÂMy shortcuts,â p. 58. â Answer or reject a call ⢠Open the fold, or press the call key to answer the call. To mute the ringing tone, select Silence , if the fold is open or if the fold is closed, press the volume up/down key. ⢠To reject an incoming call when the fold is open, press the end key. If Divert if busy is activated in your voic e mailbox, the call is forwarded to your voice mail. If not, the call is rejected. If a compatible headset supplied with the headset key is connected to the phone, press the headset key to answer and end a call. Call waiting Call waiting is a network service. To answer the waiting call during an active call, press the ca ll key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see âÂÂCall,â p. 65. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 25 Wednesday, November 29 , 2006 2:00 PM
Call functions 26 â Options during a call Many of the options that you can us e during a call are network services. For availability, contact your service provider. To increase or decrease the volume du ring a call, press the volume up or down key on the side of the phone. Select Options during a call and the following options may be available. Send DTMF â to send tone strings Swap â to switch between the active call and the call on hold Tran sf er â to connect a call on hold to an active call and disconnect yourself Conference â to make a conference call that allows up to five persons to take part in a conference call Private call â to discuss privately in a conference call Do not hold the device near your ea r when the loudspeaker is in use, because the volume may be extremely loud. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 26 Wednesday, November 29 , 2006 2:00 PM
Phone menus 27 4. Phone menus Phone features are grouped accordin g to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and personalize phone features. Scroll to access these menus and submenus. Some menus may not be available, de pending on your network. For more information, contact your service provider. â Menu views Your phone may have two types of menu views: List and Grid . In the List interface, images introduce every menu. Scroll to navigate through the menus. As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab mov es up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure. In the Grid interface, multiple menu icons appear on a single display. Use the four-way navigation key to scroll through the icons. The name of the menu appears at the top of the display and the icon for the selected menu is outlined. To change the menu view, sele ct Menu > Options > Main menu view > List or Grid . â Access a menu function 1. Select Menu and the menu you want. 2. If the menu contains submenus, select the one that you want. 3. If the selected menu contains further submenus, select the one that you want 4. To return to the previous menu level, select Back . To exit the menu, select Exit . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 27 Wednesday, November 29 , 2006 2:00 PM
Messaging 28 5. Messaging You can use mobile messages to keep in touch with friends, family, and business associ ates by using the short message service (SMS), which is a network service. Not a ll messaging features are available in all wirele ss networks. Contact your service provider for availability and subscription information. When sending messages, your phone may display the words Message sent . This is an indication that the me ssage has been sent by your device to the message center number programme d into your device. This is not an indication that the message has been received at the intended destination. For more details about me ssaging services, check with your service provider. â Text messages Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accord ingly. Characters that use accents or other marks, and characters from some la nguage options like Chinese, take up more space limiting the number of charac ters that can be sent i n a single message. A message length indicator appears at the top of the phone display. This indicator allows you to see how many characters remain in the message as you are entering text. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of two messages. You can use predefined templates to help you write text messages. Before you can send any text or e- mail messages, you need to configure the message settings. See âÂÂMessage settings,â p. 45. To check SMS e-mail servic e availability and to subscribe to the service, contact your service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 28 Wednesday, November 29 , 2006 2:00 PM
Messaging 29 Text entry To enter text while writing messages, use traditional or predictive text input. When using traditional te xt input, press a number key, 1 to 9 , repeatedly until the character you want is displayed. In predictive text input you can enter a letter with a single keypress. When you write text, appears at the top left of the display, indicating predictive text input, and is displayed, indicating traditional text input. , , or is displayed next to the text input indicator, indicating the charac ter case. To change the character case, press # . indicates number mode. To change from the letter to number mode, press and hold # , and select Number mode . Settings To set the writing language to a la nguage other than that selected, select Options > Writing language . Predictive text input is only available for the languages on the list. To set the predictive text input option, select Options > Prediction on , or to set traditional text input option, select Options > Prediction off . To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options . Predictive text input Predictive text input allows you to write text quickly by using the phone keypad and a built-in dictionary. 1. Start writing a word, using the keys, 2 to 9 , and press each key only once for one letter. The word changes after each keystroke. 2. When you finish writing the word and it is correct, press 0 . 3. If a displayed word is not correct, press * repeatedly, or select Options > Matches . When the word that you want is displayed, select Use . 4. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell . The phone displays the entered letters. Enter the word (traditional text input is used), and select Save . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 29 Wednesday, November 29 , 2006 2:00 PM
Messaging 30 Traditional text input Press a number key, 1 to 9 , repeatedly until the ch aracter you want is displayed. Not all characters available under a number key are printed on the key. The characte rs available depend on the selected writing language. See âÂÂSettings,â p. 29. If the next letter you want is located on the same key as the present one, wait until the cursor is displayed, or scroll in any direction, and enter the letter. To access the most common punctuat ion marks and special characters, press 1 . To insert a space, pr ess 0 . If you want more characters, press * . Write and send 1. Select Menu > Messaging > Create message > Text message and enter the recipientâÂÂs phone number in the To: field. 2. To retrieve a phone number from Contacts , select Add > Contact . To send the message to multiple recipie nts, add the contacts you want one by one. 3. To send the message to pe rsons in a group, select Contact group and the group you want. To retrieve th e contacts to which you recently sent messages, sel ect Add > Recently used . 4. Scroll down and enter a mess age. See âÂÂTex t entry,â p. 29. 5. To insert a template to the text message, select Options > Use template and the template you want to insert. 6. To see how the message will look to the recipient, select Options > Preview . 7. To send the message, sele ct Send . Read and reply When you receive mess ages, either 1 message received or N messages received is displayed, where N is the number of new messages. 1. To view a new message, select Show . To view it later, select Exit . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 30 Wednesday, November 29 , 2006 2:00 PM
Messaging 31 To read the message later, select Menu > Messaging > Inbox . If more than one message has been receiv ed, select the message that y ou want to read. indicates an unread message in Inbox . 2. While reading a message, select Options , and delete or forward the message, edit the message as a te xt message or an SMS e-mail or move it to another folder, or view or extract message details. You can also copy text from the beginning of the message to your phone calendar as a reminder note. 3. To reply to a message, select Reply > Text message , Multimedia , Flash message , or Audio message . T o s e n d a t e x t m e s s a g e t o a n e-mail address, enter the e-mail address in the To: field. 4. Scroll down and enter a message in the Message: field. See âÂÂText entry,â p. 29. If you want to change the message type for your reply message, select Options > Change msg. type . 5. To send the message, select Send . â SIM messages SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages ar e saved to the phone memory. To read SIM messages, select Menu > Messaging > Options > SIM messages . â Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The a ppearance of a message may vary depending on the receiving device. A multimedia message can contain text , sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it . Some networks allow text messages that include an Internet address wher e you can view the multimedia message. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 31 Wednesday, November 29 , 2006 2:00 PM
Messaging 32 You cannot receive multimedia messages during a call or an active browsing session over GSM data . Because delivery of multimedia messages can fail for var ious reasons, do not rely solely upon them for essential communications. Write and send a multimedia message The wireless network may limit the size of mult imedia messages. If the inserted picture exceeds this li mit, the device may make it smaller so that it can be sent by MMS. To set the settings for multimedia messaging, see âÂÂM ultimedia,â p. 46. To check availability and to subscribe to the multimedia messaging service, contact your service provider. 1. Select Menu > Messaging > Create message > Multimedia . 2. Enter a message. Se e âÂÂText entry,â p. 29. Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. 3. To in sert a sl ide in t he messa ge, sel ect New ; or select Options > Insert > Slide . 4. To view the message before sending it, select Options > Preview . 5. Scroll down and select Send . See âÂÂMessage sending,â p. 33. 6. Enter the recipientâÂÂs phone number in the To: field. To retrieve a phone number from Contacts , select Add > Contact . To send the message to multiple recipients, add the contacts you want one by one. To send the message to pe rsons in a group, select Cont act group and the group you want. To retrieve the contacts to which you recently sent messages, select Add > Recently used . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 32 Wednesday, November 29 , 2006 2:00 PM
Messaging 33 Message sending When you finish writing your messag e, to send the message, select Send , or press the call key. The ph one saves the message in the Outbox folder, and sending starts. If you select Save sent messages > Ye s , the sent message is saved in the Sent items folder. See âÂÂGeneral settings,â p. 45. When the phone is sending the me ssage, the animated is shown. Actual receipt of a me ssage depends on a numbe r of factors. For more details about messaging services, check with your service provider. It takes more time to send a multime dia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occu rs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending . Read and reply Important: Exercise caution when ope ning messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. When you receive multime dia messages, either Multimedia message received or N messages received is displayed, where N is the number of new messages. 1. To read the message, select Sh ow . To view it la ter, se lect Exi t . To read the message later, select Menu > Messaging > Inbox . In the list of messages, indicates an unread message. Select the message that you want to view. 2. To view the whole message if the received message contains a presentation, select Play . To view the files in the presentation or the attachments, select Options > Obje cts or Attachments . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 33 Wednesday, November 29 , 2006 2:00 PM
Messaging 34 3. To reply to the message, select Options > Reply > Text message , Multimedia , Flash message , or Audio message . Write the reply message. If you want to change the messag e type for your reply message, select Options > Change msg. type . The new message ty pe may not support all the content that you have added. 4. To send the message, sele ct Send . See âÂÂMessage sending,â p. 33. Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive msgs. is shown. To delete old messages, select OK > Yes and the folder. Scroll to the message you want, and select Delete . If you want to delete more than one message at the same time, scroll to one of the messages you wa nt to delete and select Options > Mark . Scroll to each additional message you want to delete and select Mark or if you want to delete all the messages, select Options > Mark all . When you have finished marking the mess ages you want to delete, select Options > Delete marked . Folders The phone saves received text an d multimedia messages in the Inbox folder. To set the phone to save the sent messages in the Sent items folder, see Save sent messages in âÂÂGeneral settings,â p. 45. To see any message you want to send later and have save d as a draft in the Drafts folder, select Menu > Messaging > Drafts . You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items > Saved messages or a folder you added. To add a new folder for your messages, select Option s > Add folder . To delete or rename a folder, scroll to the folder you want, and select Options > Delete folder or Rename folder . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 34 Wednesday, November 29 , 2006 2:00 PM
Messaging 35 Your phone has templates. To create a new template, save or copy a message as a template. To access the template l ist, select Menu > Messaging > Saved items > Templates . Flash messages Flash messages are text me ssages that are instantly displayed upon reception. Flash me ssages are not automatically saved. Write a flash message Select Menu > Messaging > Create message > Flash message . Enter the recipientâÂÂs phone number in the To : field. Write your message in the Message: field. The maximum length of a flas h message is 70 characters. To send the message, select Send . Receive a flash message A received flash message is indicated with Message: , followed by a few words from the beginning of the message. To read the message, select Read . To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail . â Nokia Xpress audio messaging You can use the multimedia message se rvice to create and send voice messages conveniently. Multimedia messaging service must be activated before you can use audio messages. Create an audio message 1. Select Menu > Messaging > Create message > Audio message , a nd to start recording. 2. To stop recording, select an d a message screen is displ ayed. 3. To view the available options, select Options . 4. Enter the recipientâÂÂs phone number in the To: field. To retrieve a phone number from Contacts , select Add > Contact . To send the message to multiple recipients, add the contacts you want one at a time. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 35 Wednesday, November 29 , 2006 2:00 PM
Messaging 36 To send the message to pe rsons in a group, select Cont act group and the group you want. To retrieve the contacts to which you recently sent messages, select Add > Recently used . 5. To send the message, sele ct Send . Receive an audio message When your phone receives audio messages, either 1 audio message received , or N messages received is displayed, where N is the number of new messages. To open the mess age, select Play ; or if more than one message is received, select Show > Play . To listen to the message later, select Exit . Select Options to see the available options. â Instant messaging You can take text messaging to the next level by experiencing instant messaging (IM) (network service) in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the In ternet) they are using, as long as you all use the same instant messaging service. Before you can start using instant me ssaging, you must first subscribe to your wireless service providerâÂÂs text messaging service and register with the instant messaging service you want to use. You must also obtain a user name and password be fore you can use instant messaging. See âÂÂRegister with an instant me ssaging service,â p. 37 for more information. Depending on both your IM service provider and your wireless service provider, you may not have access to a ll of the features described in this guide. To set the required settings for th e insta nt mess aging s ervic e, see Connect. settings in âÂÂAccess,â p. 37. The ic ons and texts on the display may vary, depending on the instant messaging service. While you are connected to the inst ant messaging service, you can use the other functions of the phone, and the instant messaging conversation remains active in the background. Depending on the RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 36 Wednesday, November 29 , 2006 2:00 PM
Messaging 37 network, the active instant messa ging conversation may consume the phone battery faster, and you may need to connect the phone to a charger. Register with an instant messaging service You can do this by registering over the Internet with the IM service provider you have selected to use. Du ring the registration process, you will have the opportunity to create th e user name and password of your choice. For more information about signing up for instant messaging services, contact your wi reless service pr ovider. Access To access the Instant messages menu while still offline, select Menu > Messaging > Instant messages ( Instant messages may be replaced by another term depending on the servic e provider). If more than one set of connection settings for instant messa ging service is available, select the one you want. If there is only one set defined, it is selected automatically. The following options are shown: Login â to connect to the instant messa ging service. To set the phone to automatically connect to the instant messaging service when you switch on the phone; in the login session, scroll to Automatic login: and select Change > On , or select Menu > Messaging > Instant messages , connect to the instant mess aging service, and select Options > Settings > Automatic login > On or Off . Saved convers. â to view, erase, or rename the convers ations that you saved during an in stant messaging session Connect. settings â to edit the settings needed for messaging connection Connect To connect to the instant messaging service, access the Instant messages menu, select the instant mess aging service, if needed, and RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 37 Wednesday, November 29 , 2006 2:00 PM
Messaging 38 select Login . When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Options > Logout . Sessions When connected to the instant messagin g service your status as seen by others is shown in a status line: Status: Online , My status: Busy or Status: App. off. â to change own status, select Change . Below the status line ther e are thre e fol ders containing your contacts and showing their status: Convers. , Onli ne and Offline . To expand the folder highlight it and select Expand (or press scroll right), to collapse the folder select Collapse (or press scroll left). Conversations â shows the list of new and read instant messages or invitations to instant messaging du ring the active instant messaging session. indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation. The icons and texts on the display may vary, depending on the instant messaging service you have selected. Online â shows the number of contacts that are online. Offline â shows the number of contacts that are offline. To start a conversation, expand th e Online or the Offline folder and scroll to the contact with whom you would like to chat and select Chat . To answer an invitation or to reply to a message expand the Conversations folder and scroll to the contact to whom you would like to chat and select Open . To add contacts, see âÂÂAdd IM contacts,â p. 40. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 38 Wednesday, November 29 , 2006 2:00 PM
Messaging 39 Options > Search IM users â to search for other instan t messaging users on the network by mobile phone number, alias, e-mail address, fir st name or last name. Options > Chat â to start the conversation when you have found the user that you want. Accept or reject an invitation In the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Re ad . If more than one invitation is received, scroll to the invit ation you want, an d select Open . To join the private group conversation, select Accept , and enter the s creen name you want to use as your nickname. To reject or delete the invitation, select Options > Reject or Delete . Read an instant message In the standby mode, when you are connected to the instant messaging service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed.To read it, select Read . If you receive more than one message, N new instant messages appears in the display, where N is the number of new messages. Select Read , scroll to a message, and select Open . New messages received during an active conversation are held in Instant messages > Conversations . If you receive a message from someone who is not in IM contacts , the sender ID is displayed. To save a new contact that is not in the phone memory, select Opt ions > Save contact . Participate in a conversation To participate in a conversation, write your message; and select Send , or press the call key. Select Options to view the available options. If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 39 Wednesday, November 29 , 2006 2:00 PM
Messaging 40 Write your message; and select Send , or press the call key. Your message is displayed, and the reply message is displayed below your message. Add IM contacts When connected to the IM service, in the IM main menu select Options > Add contact . Select By mobile number , Enter ID manually , Search from serv . , or Copy from server (depending on service provider). When the contact is successfully added, the phone confirms it. Scroll to a contact. To start a conversation, select Chat . Block or unblock messages When you are in a conv ersation an d want to block messages, select Options > Block contact . A confirmation query is shown, select OK to block messages from this contact. To block messages from a specific contac t in your contacts list, scroll to the contact in Conversations , Online or Offline and select Options > Block contact > OK . To unblock a contact, in the IM main menu select Options > Blocked list . Scroll to the contact you want to unblock and select Unblock > OK . Groups You can create your own private groups for an IM conversation. The private groups exist only during an IM conversation. Connect to the IM service, and from the main menu select Options > Create group . Enter the name for the grou p and the screen name that you want to use as your nickname. Mark the private group members in the contacts list, and write an invitation. â E-mail application The e-mail application uses a packet data connection (network service) to allow you to access your e-mail account from your phone when you are not in the office or at home. This e-mail applicat ion is different from RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 40 Wednesday, November 29 , 2006 2:00 PM
Messaging 41 the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system. You can write, send, and read e-mail wi th your phone. You can also save and delete the e-mail on a compatible PC. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mail messages, you must do the following: ⢠Obtain a new e-mail account or us e your current account. To check the availability of your e-mail a ccount, contact your e-mail service provider. ⢠Check your e-mail settings with your network operator or e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See âÂÂConfiguration settings service,â p. 10. You can also enter the setting s man ually. See âÂÂC onfiguration,â p. 67. To edit the e-mail settings, select Menu > Messaging > E-mail > Options > Manage accounts . This application does not support keypad tones. Settings Wizard The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New . The Manage accounts options all ow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct pr eferred access point for your operator. See âÂÂConfiguration,â p. 67. The e-mail application requires an Internet access point without a proxy. WAP access points normally in clude a proxy and do not work with the e-mail application. Write and send an e-mail You can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 41 Wednesday, November 29 , 2006 2:00 PM
Messaging 42 1. Select Menu > Messaging > E-mail > Write new e-mail . 2. If more than one e-mail account is defined, select the account from which you want to send the e-mail. 3. Enter the recipientâÂÂs e-mail address. 4. Write a subject for the e-mail. 5. Enter the e-mail messa ge. See âÂÂText entry,â p. 29. To attach a file to the e-mail, select Options > Attach file and a file from Gallery . 6. To send the e-mail message immediately, select Send > Send now . To save the e-mail in the Outbox folder to be sent later, select Send > Send later . To edit or continue writing your e-mail later, select Options > Save as draft . The e-mail is saved in Outboxes > Drafts . To send the saved e-mail from the outbox, select Menu > Messaging > E-mail > Options > Send e-mail or Send/check e-mail . Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail . If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only down loads e-mail headers at first. 2. Select Back . 3. Select Inboxes , the account name, the new message, an d Retrieve to download the complete e-mail message. To download new e-mail messages an d to send e-mail that has been saved in the Outbox folder, select Options > Send/check e-mail . Read and reply to e-mail Important: Exercise cauti on when opening messages . E-mail messages may contain malicious software or ot herwise be harmful to your device or PC. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 42 Wednesday, November 29 , 2006 2:00 PM
Messaging 43 1. Select Menu > Messaging > E-mail > Inboxes , the account name, and the desired message. 2. While reading the message, select Options to view the available options. 3. To reply to an e-mail, select Reply > Original text or Empty message . To reply to many, select Options > Reply to all . Confirm or edit the e-mail address and subject, then write your reply. 4. To send the message, select Send > Send now . E-mail folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: âÂÂAccount nameâ for incoming e-mail, Archive for archiving e-mail, Custom 1 â Custom 3 for sorting e-mail, and Junk where all spam e-mail is stored. The Outboxes folder contains the following folders: Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options to view the available options of each folder. Spam filter The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list messages are filtered to the Junk folder. Unknown and White list messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender . â V oice messages If you subscribe to voice mail (netwo rk service), your service provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 43 Wednesday, November 29 , 2006 2:00 PM
Messaging 44 both. If you receive more than on e message, your phone shows the number of messages received. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages . To enter, search for, or edit your voice mailbox number, select V oice mailbox number . If supported by the network, indi cates new voice messages. Select Listen to call your voice mailbox number. â Info messages With the Info messages network service, you can receive short text messages from your service provider. To check availability, topics, and the relevant topic numbers, co ntact your service provider. â Service comma nds Use the Service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about specific service commands. Select Menu > Messaging > Service commands . â Delete messages To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the message yo u want to delete, and select Delete . If you want to delete more than one message at the same time, scroll to one of the messages you wa nt to delete, and select Options > Mark . Scroll to each additional message you want to delete, and select Mark or if you want to delete all the messages, select Options > Mark all . When you have finished marking th e messages you want to delete, select Options > Delete marked . To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the fold er from which you want to delete the messages. Depending on the folder, the phone asks if you want to delete the messages. To delete, select Ye s . Other wise, if the folder contains unread messages or messages which are waiting to be sent, the phone RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 44 Wednesday, November 29 , 2006 2:00 PM
Messaging 45 asks whether you want to keep the m. To keep these messages, select Ye s . To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Ye s . â Message settings General settings General settings are common for text and multimedia messages. Select Menu > Messaging > Message settings > General settings and one of the following options: Save sent messages > Ye s â to set the phone to save the sent messages in the Sent items folder Overwriting in Sent items â to select if overwr iting takes place when messages are sent and th e message memory is full Font size â t o s e l e c t t h e f o n t s i z e u s e d i n m e s s a g e s Graphical smileys > Ye s â to set the phone to replace character-based smileys with graphical ones Text messages The text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages. Select Menu > Messaging > Message settings > Text messages and one of the following options: Delivery reports â to select whether the ne twork sends delivery reports about your messages (network service) Message centres > Add centre â to set the phone number and name of the message center that is requir ed for sending text messages. You receive this number from your se rvice provider. If you select SIM msg. centre , you can view the SIM me ssage center information. Message centre in use â to select the message center in use RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 45 Wednesday, November 29 , 2006 2:00 PM
Messaging 46 E-mail message centres > Add centre â to set the phone numbers and name of the e-mail center for sen ding SMS e-mails. If you select SIM e-mail cntr . , you can view the SIM e-mai l center information. E-mail centre in use â to select the SMS e-mail message center in use Message validity â to select the length of time for which the network attempts to deliver your message Messages sent via > Tex t > P agi ng , or Fax â to select the format of the messages to be sent (network service). Use packet data > Ye s â to set GPRS as the pr eferred SMS bearer Character support > Full â to select all characters in the messages to be sent as viewed. If you select Reduced , characters with accents and other marks may be converted to other ch aracters. When writing a message, you can check how the message will look to the recipient by previewing the message. See âÂÂWrite and send,â p. 30. Reply via same centre > Ye s â to allow the recipient of your message to send you a reply using your me ssage center (netw ork serv ice) Multimedia The multimedia message settings affe ct the sending, receiving, and viewing of multimedia messages and audio messages. You may receive the configuration se ttings for multimedia messaging as a configuration message. See âÂÂConfiguration settings service,â p. 10. You can also enter the settings ma nually. See âÂÂConfiguration,â p. 67. Select Menu > Messaging > Message settings > Multimedia msgs. and one of the following options: Delivery reports > Ye s â to ask the network to send delivery reports about your messages (network service) Image size (multimedia) â to define the default image size used in multimedia messages Default slide timing â to define the default time between slides in multimedia messages Allow multimedia reception > Yes or No â to receive or block the multimedia message. If you select In home network , you cannot receive RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 46 Wednesday, November 29 , 2006 2:00 PM
Messaging 47 multimedia messages when outside your home network. The default setting of the multimedia me ssage service is generally In home network . Incoming multimedia messages â to allow the reception of multimedia messages automatically, manually afte r being prompted, or to reject the reception. This setting is not shown if Allow multimedia reception is set to No . Allow adverts â to receive or reject advert isements. This setting is not shown if Allow multimedia reception is set to No , or Incoming multi- media messages is set to Reject . Configuration settings > Configuration â only the configurations that support multimedia messaging are show n. Select a service provider, Default , or P ersonal config. for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings. E-mail messages The settings affect the sending, rece iving, and viewing of e-mail. You may receive the settings as a configura tion message. See âÂÂConfiguration settings service,â p. 10. You can also enter the settings manually. See âÂÂConfiguration,â p. 67. Select Menu > Messaging > Message settings > E-mail messages and from the following options: Configuration â to select the set that you want to activate Account â to select an account pr ovided by the service provider My name â to enter your name or nickname E-mail address â to enter your e-mail address Incoming server type â to select the incoming e-mail server type Login information â to enter information according to the server type Incoming mail settings â to select the maximum number of mails that shall be retrieved Outgoing mail settings (SMTP) â to enter SMTP (simple mail transfer protocol) information and setting options used when sending e-mail RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 47 Wednesday, November 29 , 2006 2:00 PM
Messaging 48 Display terminal window > Ye s â to per form manual user authentication for intranet connections RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 48 Wednesday, November 29 , 2006 2:00 PM
Contacts 49 6. Contacts In Contacts , you can store and manage contact information, such as names, phone numbers, and addresses. You can save names and numbers in the internal memory of th e phone, the SIM card memory, or in a combination of the two. Names and numbers saved in the SIM card memory, are indicated by . â Search Select Menu > Contacts > Names and scroll through the list of contacts or enter the first letter of the name you are trying to find. â Save names and phone numbers Names and numbers are saved in the used memory. Select Men u > Contacts > Names > Options > Add new contact and enter the last name, first name, and the phone number. â Save numbers, it ems , or an image In the phone memory for contacts, you can save different types of phone numbers and short text items per na me. You can also assign a ringing tone to a contact. The first number you save is automa tically set as the default number, and it is indicated with a frame around the number type indicator (for example, ). When you select a na me, the default number is used unless you select another number. 1. Make sure that the memory in use is either Phon e or Phone and SIM . 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail . 3. To add a number, select Number and one of the number types. 4. To add another detail, select a text type, an image from the Gallery , or a new image. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 49 Wednesday, November 29 , 2006 2:00 PM
Contacts 50 5. To change the number type, scroll to the number you want, and select Options > Change type . To set the selected number as the default number, select Set as default . 6. Enter the number or text item; to save it, select Save . 7. To return to standby mode, select Back > Exit . â Copy a contact Search for the contact you want to copy, and select Options > Copy contact . You can copy names and phone numbers from the phone contact memory to the SIM card memor y, or vice versa. The SIM card memory can save names with one phone number attached to them. â Edit contact details 1. Search for the contact yo u want to edit, select Details ; and scroll to the name, number, text item, or image you want. 2. To edit a name, number, or text item, or to change image, select Options > Edit . You cannot edit an ID when it is on the IM contacts or the Subscribed names list. â Delete contacts or details To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone mem. or From SIM card . Confirm with the security code. To delete a contact, search for the contact you want, and select Options > Delete contact . To delete a number, text item, or an image attached to the contact, search for the contact, and select Details . Scroll to the desired detail, and select Options > Delete > Delete number , Delete detail , or Delete image . Deleting an image from contac ts does not delete it from the Gallery . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 50 Wednesday, November 29 , 2006 2:00 PM
Contacts 51 â Business cards You can send and receive a personâÂÂs contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia , Via text message , or Via Bluetooth . When you have received a business card, select Sh ow > Save to save the business card in the phone memory. To discard the business card, select Exit > Ye s . â Settings Select Menu > Contacts > Settings and one of the following options: Memory in use â to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and number from both memories. In that case, when you save names and numbers, they are saved in the phone memory. Contacts view â to select how the names and numbers in Contacts are displayed Name display â to select whether the contactâÂÂs first or last name is displayed first Font size â to set the font size for the list of contacts Memory status â to view the free and used memory capacity â Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into calle r groups with a different ringing tone and a group image. â Speed dialing To assign a number to a speed dialing key, select Menu > Contacts > Speed dials , and scroll to the speed dialing number that you want. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 51 Wednesday, November 29 , 2006 2:00 PM
Contacts 52 Select Assign , or if a number has already been assigned to the key, select Options > Change . Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. To make a call using speed dia ling, see âÂÂSpeed dialing,â p. 24. â Service and my numbers Select Menu > Contacts and one of the following options: Service numbers â to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers â to view the phone numbers assigned to your SIM card. This is only shown if the numbers are included on your SIM card. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 52 Wednesday, November 29 , 2006 2:00 PM
Call log 53 7. Call log The phone registers the ph one numbers of identified missed, received, and dialed calls, an d the approximate length of your calls. The phone registers missed and re ceived calls only if the network supports these functions, and the phone is turned on and within the networkâÂÂs service area. To view the information on your calls, select Menu > Log > Missed calls , Received calls , or Dialled numbers . To view your recent missed and received calls and the dialed numbers chronologically, select Call log . To view the contacts to whom you most recently sent messages, select Message recipients . To view the approximate information on your recent communications, select Menu > Log > Call duration , Packet data counter , or P acket data conn. timer . To view how many text and multime dia messages you have sent and received, select Menu > Log > Message log . Note: The actual invoice for calls and services from your service provider may vary, depending on ne twork features, rounding off for billing, taxes, and so forth. Some timers, including the life timer, may be reset during service or software upgrades. â P ositioning information The network may send you a location request. You can ensure that the network will deliver location information of your phone only if you approve it (network service). Contac t your service provider to subscribe and to agree upon the delivery of location information. Some networks allow you to request the position of the phone (network service). To accept or reject the location request, select Accept or Reject . If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your service provider. The RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 53 Wednesday, November 29 , 2006 2:00 PM
Call log 54 phone displays 1 missed position request . To view the missed location request, se lect Show . To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > P osition log > Open folder or Delete all . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 54 Wednesday, November 29 , 2006 2:00 PM
Settings 55 8. Settings Use this menu to set or ch ange your profiles, themes, personal shortcuts, time and date settings, call settings, connectivity settings, phone settings, main dis play settings, mini display settings, tone settings, enhancement settings, configuration settings, security settings, and to restore factory settings. â Profiles Your phone has various setting groups , called profiles, for which you can personalize the phone tones for different events and environments. Select Menu > Settings > Profiles and a profile. ⢠To activate the selected profile, select Activate . ⢠To personalize the profile, select Personalise , and select the setting you want to change: then, make the changes. ⢠To set the profile to be active until a certain time (up to 24 hours), select Timed and set the time you want the profile setting to end. When the time set for the profile expires, the previous profile (that was not timed) becomes active. â Themes You can change the look of your phon e display by activating a theme. A theme can include a wallpaper image, a ringing tone, a screen saver, and a color scheme. Themes are stored in the Gallery . Select Menu > Settings > Themes and one of the following options: Select theme â to set a theme in your phone. A list of folders in the Gallery opens. Open the Themes folder, and select a theme. Theme downloads â to open a list of links to download more themes. See âÂÂDownload settings,â p. 97. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 55 Wednesday, November 29 , 2006 2:00 PM
Settings 56 â To ne s You can change the settings of the selected active profile. Select Menu > Settings > Tone s . a nd edit the available s ettings. You can find the same settings when you personalize a profile in the Profiles menu. See âÂÂProfiles,â p. 55. To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for: . Scroll to the caller group you want or All calls , and select Mark . â Display With display settings, you can pers onalize your display view of the phone. Main display You can select display settings for the start screen (main display). Standby mode settings Select Menu > Settings > Main display and one of the following options: Wallpaper â to display a background picture (wallpaper) on the start screen. Select Wallpapers and from the following: ⢠Image or ⢠Slide set and an image or a slide from the Gallery or ⢠Open Camera. To download more graphics, select Graphic downloads . Select Active standby â to display the active standby. Select one of the following options: ⢠P ersonalise view â to change the content and to reorganize the content on the display Options > Mo ve content . ⢠Active standby key â to change the key for accessing the navigation mode. The same setting is also in the My shortcuts menu. See âÂÂEnabling active standby,â p. 59. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 56 Wednesday, November 29 , 2006 2:00 PM
Settings 57 Standby mode font colour â to select the color for the texts on the display in the standby mode Navigation key icons â to set the scroll key icons that are shown in the standby mode Fold animation â to select whether an animation is shown when you open and close the fold. The fold anima tion is only visible if it is supported by and selected from the active theme set in your phone. See âÂÂThemes,â on p. 55. Operator logo â to set your phone to display or hide the operator logo. Cell info display > On â to receive information from the network operator depending on the networ k cell used (network service). Screen saver To select a screen saver, select Menu > Settings > Main display > Screen saver > Screen savers > Image , Slide set , Open Camera , Video clip , Analogue clock or Digital clock . To download more screen savers, select Graphic downloads . To enter the time afte r which the screen saver is activated, select Time-out . To activate the screen saver, select On . Font size This feature allows you to select the font size for Messaging , Contacts and We b . Select Menu > Settings > Main display > Font size and one of the following: Messaging â to select the font size you want to use for messages. Select either Extra small font , Normal f ont or Large font . Contacts â to select the font size you want to display your contactsâ names. Select either Normal font or Large font . Web â to select the font size you want to display for mobile Internet pages. Select either Extra small font , Small font or Large font . Mini display You can select display settings for the mini display on the front of your phone. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 57 Wednesday, November 29 , 2006 2:00 PM
Settings 58 Screen saver Select Menu > Settings > Mini display > Screen saver > Analogue clock or Digital clock . To enter the time after which the screen sa ver is activated, select Time-out . To activate the screen saver, select On . â Time and date Select Menu > Settings > Time and date and one of the following options: Time â to set the phone to show or hide the clock in the standby mode, adjust the time, and select the time zone and the time format. Date â to set the phone to show or hide the date in the standby mode, set the date, and select the date format and date separato r. Auto-update of date & time (network service) â to set the phone to automatically update the time and date to the appropriate time zone. â My shortcuts You can set your most frequently used functions to be quickly accessed through the My shortcuts feature. Left selection key To select a function from the list fo r the left selection key, select Menu > Settings > My shortcuts > Left selection key . See also âÂÂStandby mode,â p. 19. To activate a function in the standby mode if the left selection key is Go to , select Go to and the function you want on your personal shortcut list. Select Options and from the following options: Select options â to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark . Organise â to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move . Scroll to where you want to move the function, and select OK . Repeat this RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 58 Wednesday, November 29 , 2006 2:00 PM
Settings 59 process, if you want to move an other function. When you have completed rearranging the f unctions you want, select Done > Ye s . Right selection key To set a specific function (from a pr edefined list) to the right selection key, select Menu > Settings > My shortcuts > Right selection key . This function can be used only if it is supported by your service provider. Navigation key This key allows you to scroll up, down, left, and right. To assign other phone functions (from a predefined lis t) to the navigation key, select Menu > Settings > My shortcuts > Navigation key . Scroll to the key you want, select Change and a function from the list. To remove a shortcut function from the key, select (empty) . To reassign a function for the key, select Assign . Enabling active standby This function allows you to select how the active standby mode is activated. Select Menu > Settings > My shortcuts > Ac ti ve st a nd by key > Navigation key up , Navigat. key down , or Nav . key up/down . Voice commands You can call contacts and carry out phone functions by saying voice commands. Voice commands are la nguage-dependent. To set the language, see V oi ce recognition language in âÂÂPhone,â p. 66. To select the phone functions to ac tivate with a voice command, select Menu > Settings > My shortcuts > V oice commands and a folder. Scroll to a function you want. indicates that the voice tag is activated. To deactivate the voice command, select Options > Remove . To activate the voice tag, select Add . To play the activated voice command, select Playback . To use voice commands, see âÂÂEnhanced voice dialing,â p. 24. To manage the voice commands, scro ll to a phone function, and select from the following options: RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 59 Wednesday, November 29 , 2006 2:00 PM
Settings 60 Edit or Remove â to change or deactivate the voice command of the selected function Remove all â to deactivate voice commands to all functions in the voice commands list. â Connectivity You can connect the phone to compa tible devices, using Bluetooth wireless technology or USB data cable (CA-53) connection. You can also define the settings for EGPRS or GPRS dial-up connections. Bluetooth wireless technology This device is compliant w ith Blue tooth Specification 2.0 supporting the following profiles: hands-free, headset, network access, object push profile, file transfer profile, dial-up networking profile , SIM access profile, serial port profile, service discovery application profile, pe rsonal area network profile, advanced audio distribution profile and audio vi deo remote control profile. To ensure interoperability between o ther devices supporting Bluetoo th technology, use Nokia approved enhancements for this mo del. Check wi th the manufacturers of other devices to determine t heir compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local author ities or service provide r. Features that use Blueto oth technology, or allow s uch features to run in the background while using other features, in crease the demand on battery power and reduce the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (33 feet). Since devices using Bluetooth technology communicate us ing radio waves, your phone and the other devices do not need to be in direct line of sight, although the connection can be subject to interf erence from obstructions, such as walls or from other electronic devices. To set up a Bluetooth connection, do the following: 1. Select Menu > Settings > Connectivity > Bluetooth . 2. To activate or deactivate the Bluetooth function, select Bluetooth > On or Off . indicates an active Bluetooth connec tion. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 60 Wednesday, November 29 , 2006 2:00 PM
Settings 61 3. To search for compatible Bl uetooth audio devices, select Search for audio enhancements and the dev ice that you want to c onnect to the phone. To search for any Bluetooth device in r ange, select P aired devices . Select New to list any Bluetooth device in range. Scroll to a device, and select Pa i r . 4. Enter the Bluetooth passcode of th e device to associate (pair) the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer. Settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name . Operating the phone in hidden mode is a safer way to avoid malicious software. Do not accept Bluetooth connectivity from sourc es you do not tru st. Turn off the Bluetooth functionality as an other alternative. This will not affect other functions of the phone. Connection Select Menu > Settings > Connectivi ty > Bluetooth . To check which Bluetooth connection is currently active, select A ctive devices . To view a list of Bluetooth devices that are curre ntly paired with the phone, select P aired devices . Select Options to access available options, depending on the status of the device and the Bluetooth connection. Packet data General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP) based network. GPRS is a data bearer that enables wireless access to data networks such as the Internet. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 61 Wednesday, November 29 , 2006 2:00 PM
Settings 62 Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability of EGPRS or GPRS and data transfer speed, contact your network operator or service provider. The applications that may use EGPRS or GPRS are MMS, video streaming, browsing sessions, e-ma il, remote SyncML, Java application downloading, and the PC dial-up. When you ha ve selecte d GPRS as a data bearer, the phone uses EGPRS instead of GPRS, if this is available in the network. You cannot select between EGPRS and GPRS, but for some applicat ions you may be able to select GPRS or GSM data (circuit switched data, CSD). To define how to use the service, select Menu > Settings > Connectivity > P acket data > P acket data connection and one of the following options: When needed â to set the packet data registration and connection to established when an application using packet data needs it and closed when you end the application. Always online â to set the phone to automatically register to an packet data network when you switch the phone on. or indicates that the GPRS or EGPRS service is available. If you receive a call or a text message, or make a call during a GPRS or EGPRS connection, or indicates that the GPRS or EGPRS connection is suspended (on hold). Packet data settings You can connect the phone using Blue tooth wireless technology or USB data cable connection to a compati ble PC and use the phone as a modem to enable EGPRS or GPRS connectivity from the PC. To define the settings for EGPRS or GPRS connections from your PC, select Menu > Settings > Connectivity > Packet data > P acket data settings > A ctive access point , and activate the access point you want to use. Select Edit active access point > Alias for access point , enter a name to change the access poin t settings, and select OK . Select Packet data access point , enter the access point na me (APN) to establish a connection to an EGPRS or GPRS network, and select OK . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 62 Wednesday, November 29 , 2006 2:00 PM
Settings 63 You can also set the EGPRS or GPRS dial-up service settings (access point name) on your PC, by using th e One Touch Access software. See âÂÂNokia PC Suite,â p. 102. If you have set the settings both on your PC and on your phone, the PC settings are used. Data transfer and synch ronization Synchronize your data from calendar, notes, and contacts with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service). Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. To synchronize with a remote Internet server is not possible without a SIM card. To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another c ompatible device, the partner is automatically added to the list, us ing the contact data from the other device. Server sync and PC sync settings are the or iginal items in the list. To add a new partner to the list , such as a new device, select Menu > Settings > Connectivity > Data transfer > Options > Add contact > Phone sync or Phone copy , and enter the settings according to the transfer type. To edit the copy and synchronize settings, select a contact from the partner list, and select Options > Edit . To delete a selected partner, select Options > Delete > OK . You cannot delete Server sync and Phone sync . Data transfer with a compatible device For synchronization, Bluetooth wirele ss technology is used. The other device is in the standby mode. To start a data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the list other than Server sync and PC sync . Based on the settings, the selected data is copied or synchronized. The other device also must be activated to receive data. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 63 Wednesday, November 29 , 2006 2:00 PM
Settings 64 Synchronize from a com patible PC To synchronize data from calendar, notes, and contacts from a compatible PC, use Bluetooth wireless technology or a USB data cable (CA-53). You also need the correct ve rsion of Nokia PC Suite software for your phone installed on the PC . See âÂÂComputer connectivity,â p. 102 for information about Nokia PC Suite. Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC by starting the synchronization from the PC. Synchronize from a server To use a remote Internet server, you have to su bscribe to a synchronization service. For more in formation and the settings required for this service, contact your service provider. You may receive the settings as a configuration messag e. See âÂÂConfiguration settings service,â p. 10 and âÂÂConfiguration,â p. 67. If you have saved data on the remote Internet server, you can synchronize your phone by starting the synchronization from your phone. Select Menu > Settings > Connectivity > Data transfer > Server sync . Depending on the settings, select Initialising sync or Initialising copy . If the contacts or calendar are fu ll, synchronizing may take up to 30 minutes to complete, when synchronizing for the first time, or after an interrupted synchronization. USB data cable You can use the USB data cable to transfer data between the memory card inserted in the phone and a c ompatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the memory card for da ta transfer or picture printing, connect the data cable; when the phone displays USB data cable connected. Select mode. , select OK and one of the following options: Nokia mode â to use the cable for Nokia PC Suite RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 64 Wednesday, November 29 , 2006 2:00 PM
Settings 65 Printing & media â to print pictures directly from the phone by using a compatible printer. Data storage â to activate the memory card for data transfer To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode , Printing , or Data storage . â Call Select Menu > Settings > Call and one of following options: Call divert â to forward your incoming calls (network service). Call divert and call barring cannot be active at the same time. See Call barring service in âÂÂSecurity,â p. 68. Anykey answer > On â to answer an incoming call by briefly pressing any key, except the left and right sele ction keys, volume key, camera key, or the end key. Answer when fold is opened > On â to set your phone to answer a call when you open the fold. If the setting is off, you must press the call key after you open the fold. Automatic redial > On â to set your phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. Speed dialling > On and the names and phone numbers assigned to the speed dialing keys, 2 to 9. To dial, press and hold the corresponding number key. Call waiting > Activate â to set the network to notify you of an incoming call while you have a call in progress (network service). See âÂÂCall waiting,â p. 25. Summary after call > On â to briefly display th e approximate duration of the call after each call. Send my caller ID > Ye s â to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 65 Wednesday, November 29 , 2006 2:00 PM
Settings 66 â Phone Select Menu > Settings > Phone and one of the f ollowing options: Language settings > Phone language â to set the display language of your phone. If you select Automatic , the phone selects the language according to the information on the SIM card. ⢠To select the USIM card language, select SIM language . ⢠To set a language for th e voice playback, select V oice recognition lang uage . See âÂÂMake a voice dialing call,â p. 24 and V oice commands in âÂÂMy shortcuts,â p. 58. Memory status â to view the free memory and the used memory for each function in the list Security keyguard â to set the phone to ask for the security code when you unlock the keyguard. Enter th e security code, and select On . When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Automatic keyguard â to set the keypad to lock automatically. Choose On and the time-out to activate the keyguard, or Off to set the automatic keyguard off. Flight query â to set the phone to ask if Flight mode should be used each time the phone is turned on. In Flight mode , all radio connections are turned off. Flight mode should be used in areas sensitive to radio emissions. Welcome note â to create the welcome note you would like to be shown briefly when the phone is turned on Phone updates â to view the current phone software version, to download new phone software and, to install downloaded phone software. See âÂÂPhone so ftware updates,â p. 70. Operator selection > Automatic â to set the phone automatically to select one of the cellular networks available in your area. With Manual , you can select a network that has a roaming agreement with your service provider. Confirm SIM service actions . This option is shown only if supported by your SIM card. See âÂÂS IM services,â p. 101. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 66 Wednesday, November 29 , 2006 2:00 PM
Settings 67 Help text activation â to select whether the phone shows help texts Start-up tone â to select whether the phone plays a start-up tone when the phone is turned on Switch off tone â to select whether the phone plays a switch off tone when the phone is turned off. This menu is only visible if the tone exists in Themes or is part of the powering dow n fu nctionality of your service provider. Fold close handling â to select whether closing the fold causes the phone to go to stand-by mode or to keep all running applications open. â Enhancements This menu is shown only if the phon e is or has been connected to a compatible mobile enhancement, other than the charger. Select Menu > Settings > Enhancements . You can select an enhancement menu if the corresponding enhancement is or has been connected to the phone. Depending on the enhancement, select from one of the following options: Default profile â to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer â to set the phone to answer an incoming call automatically after five seconds. If Incoming call alert is set to Beep once or Off , automatic answer is of f. Lights â to set the lights permanently On . Select Automatic to set the lights on for 15 seconds after a keypress Ignition detector > On â to automatically switch off the phone approximately 20 seconds after you switch off the car ignition, when the phone is connected to the full car kit Text phone > Use text phone > Ye s â to use text phone settings instea d of headset settings â Configuration You can configure your phone with settings that are required for certain services to function correctly. Th e services are multimedia messaging, RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 67 Wednesday, November 29 , 2006 2:00 PM
Settings 68 instant messaging, synchronization, e-mail application, streaming, push to talk, and browser. Your service provider may also send you these settings as a configuration message. To save the configuration settings re ceived as a configuration message, see âÂÂConfiguration settings service,â p. 10. Select Menu > Settings > Configuration and one of the following options: Default configuration settings â to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider supports. To set the configuration se ttings of the service provider as default settings, select Options > Set as default . To delete configuration settings, select Delete . Activate default in all applications â to activate the default configuration settings for supported applications Preferred access point â to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and pa cket data access point or GSM dial- up number. Connect to service provider su pport â to download the configuration settings from your service provider, if this is supported by your service provider P ersonal configuration settings â to add new personal accounts for various services manually, and to acti vate or delete them. To add a new personal account if you ha ve not added any, select Add new ; otherwise, select Options > A dd new . Select the service type, and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate . â Security When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 68 Wednesday, November 29 , 2006 2:00 PM
Settings 69 Select Menu > Settings > Security and one of the following options: PIN code request â to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. Call barring service â to restrict incoming calls to and outgoing calls from your phone (network service). A password is required. Fixed dialling â to restrict your outgoing calls to selected phone numbers, if this function is supported by your SIM card. Closed user group â to specify a group of people whom you can call and who can call you (network service). Security level > Phone â the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when th e SIM cardâÂÂs memory is selected and you want to change the memory in use. Access codes â to set the PIN code or UPIN code in use, or to change the security code, PIN code, UPIN code, PIN2 code, and call barring password. Code in use â to select whether the PIN code or UPIN code should be active. Authority certificates or User certificates â to view the list of the authority or user certificates downloaded into your phone. See âÂÂCertificates,â p. 99. Security module settings â to view Security module details , activate Module PIN request , or change the module PIN and signing PIN. See also âÂÂAccess codes,â p. 9. â Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett. and enter the security c ode. Data that you have entered or downl oaded is not dele ted. For example, names and numbers in Contacts are not affected. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 69 Wednesday, November 29 , 2006 2:00 PM
Settings 70 â Phone software updates You may initiate phone software updates from the Phone updates menu. Also, your service provider may initiate the updates by sending them over the air directly to your device. This function is known as firmware over the air (FOTA). Warning: If you install a software update, you cannot use the device, even to make eme rge ncy calls, until the update is completed and the device is restar t e d . B e s u r e t o b a c k u p d a t a before accepting a FOT A update. Download Select Menu > Settings > Phone > Phone updates to request available phone software updates from yo ur service provider. Select Current software details to display the current software version. Select Download phone software to download and install a phone software update (if an update is available). Follow the instructions on the display. Install Select Install so ftware update to start the installation, if you cancelled the installation after the download. The software update may take several minutes. Note: If there are problems with the download or installation, contact your service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 70 Wednesday, November 29 , 2006 2:00 PM
Operator menu 71 9. Operator menu Your service provider may have pr ogrammed an operator-specific menu into your phone. If this menu exists in your phone, its functions depend entirely upon the service provider. Contact your service provider for more information. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 71 Wednesday, November 29 , 2006 2:00 PM
Gallery 72 1 0. Gallery In this menu, you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any conten t and activation key before acquiring them, as they may be subject to a fee. The files stored in the Gallery use the memory capacity of the phone. You can use a compatible memory card to extend the memory capacity to store images, themes, graphics, ri nging tones, video clips, and sound clips in the Gallery . To manage the files and folders, do the following: 1. Select Menu > Gallery . A list of fol ders is shown. If a memory card is inserted in the phone, the folder Memory card , (unformat.) , or the name of the memory card is shown. 2. Scroll to the folder you want. To view a list of files in the folder, select Open . For the available options, select Options . 3. Scroll to the file you want to view, and select Open . For the available options, select Options . â Format memory card To format a new memory card, select Menu > Gallery . Scroll to the memory card folder, and select Options > Format mem. card . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 72 Wednesday, November 29 , 2006 2:00 PM
Media 73 11 . M e d i a â Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GPP format. The camera lens is on the front of the phone. The color display works as a viewfinder. Take a photo 1. Select Menu > Media > Camera > Capture , or press the camera key and select Capture . The phone saves the photo in Gallery > Images , unle ss you set the phone to use the memory card to save photos. 2. To take another photo, select Back . 3. To zoom in or out, press the four-way navigation key up or down. 4. To take up to five photos in quick succession, select Options > Img. sequence on > Sequen. To take another photo, select Options > New image . The higher the resolution, the fewer photos you can take sequentially. 5. To send the photo as a multimedia message, select Send . 6. To set a timer to delay capturing a photo for 10 seconds, select Options > Self-timer on > Start . A beep sounds while the self-timer is running, and beeps faster when the camera is about to capture the photo. After the timeout, the camera takes the photo and saves the photo in Gallery > Images . To take a photo when the lighting is dim, the camera automatically adjusts a longer exposure time so the photo quality is better. This Nokia device supports an image capture resolution up to 640 x 480 pixels. The image resolution in th ese materials may appear different. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 73 Wednesday, November 29 , 2006 2:00 PM
Media 74 Record a video clip Select Menu > Media > Camera > Options > Video > Record . To pause recording, select Pa u s e ; to resume recording, select Continue . To stop recording, select Stop . The phone saves the recording in Gallery > Video clips . To view the options, select Options . Camera settings Select Menu > Media > Camera > Options > Settings and edit the available settings. Camera effects Select Menu > Med ia > Camera > O ptions > Effects and one of the available options. â Media player With the media player you can view, play, and download files, such as images, audio, video and animated images. You can also view compatible streaming videos from a ne twork server (network service). Select Menu > Media > Media player > Open gallery , Bookmarks , Go to address , or Media downloads . Set for streaming service You may receive the configuration setti ngs required for the streaming as a configuration message from the netw ork operator or service provider. See âÂÂConfiguration settings servic e,â p. 10. To enter the settings manually, see âÂÂConfiguration,â p. 67. Select Menu > Media > Media player > Streaming sett. and one of the following options: Configuration â Only the configurations that support streaming are displayed. Select a service provider, Default , or Pe rsonal config. Account â Select a streaming service account contained in the active configuration settings. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 74 Wednesday, November 29 , 2006 2:00 PM
Media 75 â Music player Your phone includes a music player for listening to music tracks, recordings, or MP3, MP4, WMA (W indows Media Audio) , AAC, AAC , or eAAC sound files that you have tr ansferred to the phone with the Nokia Music Manager application. Music files are automatically detected and added to the default track list. Play music tracks 1. Select Menu > Media > Music player . The details of the first track on the default track list are shown. 2. To play a track, scroll to the track, and select . 3. To skip to the beginning of the next track, select . To skip to the beginning of the previous track, select twice. 4. To rewind the current track, select and hold . To fast forward the current track, select and hold . Release the key at the position you want. 5. To pause the playing, select . Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Settings In the Music player menu, the following options may be available: Show tracks â to view all the tracks availa ble on the track list. To play a track, scroll to the track you want, and select Play . Music library â to browse your music library according to followi ng criteria: All tracks , Artists , Albums , Genres , Composers or Track lists . To update the contents of your music library, select Update library . Play options > Random > On â to pl ay the tracks in the track list in random order. Select Repeat > Current track or All tracks to play the current track or the en tire track list repeatedly. Media equaliser â to open the list of media equalizer sets. See âÂÂEqualizer,â p. 79. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 75 Wednesday, November 29 , 2006 2:00 PM
Media 76 Add to Favourites â to add the current song to the Favo u ri te s track list. Play via Bluetooth â to connect and play music through a bluetooth enabled audio accessory using bluetooth connection. Use tone â to use the current song as a ring tone for example. You are presented a list of possible options for the tone. Send â to send the selected file using MMS or a bluetooth connection Web page â to connect to a browser service related to the curren t track. This function is only available when the address of the service is included in the track. Music downloads â to download music through web. Memory status â to view the free and used memory capacity â Radio The FM radio depends on an antenna other than the wireless device antenna. A compatible head set or enhancement needs to be at tached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous ex posure to high volume may damage your hearing. Select Menu > Media > Radio . To use the graphical keys , , , or on the p hone display, scroll left or right to the key you want and select it. Save channels 1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, press or . 2. To save the channel to a memory lo cation 1 to 9, press and hold the corresponding number key. 3. To save the channel in the me mory location from 10 to 20, press 1 or 2 , and press and hold the number key (0 to 9 ) you want. 4. Enter the name of the channel, and select OK . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 76 Wednesday, November 29 , 2006 2:00 PM
Media 77 Listen 1. Select Menu > Media > Radio . 2. To scroll to the channel you want, select or , or p ress the headset key. 3. To select a radio channel location , briefly press the corresponding number keys. 4. Select Options and one of the following options: Switch off â to turn off the radio. Save station â to save a new channel by entering the channelâÂÂs name Visual Radio â to set whether the Visual Radio application is used (network service). To check the availability and costs, contact your network operator or service provide r. Some radio channels may send text or graphical information that you can view using the Visual Radio application. Loudspeaker or Headset â to listen to the radio using the loudspeaker (limited to FM radio) or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. Mono output or Stereo output â to listen to the radio in monophonic sound or in stereo. Stations â to select the list of saved ch annels. To delete or rename a channel or edit the visual service ID, scroll to the channel you want, and select Options > Delete statio n or Rename or Visual service ID . Search all stations â to start automatic search and save function for all available radio channels. The sear ch picks up only the strongest available radio channels. Set frequency â to enter the frequency of the radio channel you want. Station directory â to activate the station directory (network service) to seek available radio stations and save them for later use. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 77 Wednesday, November 29 , 2006 2:00 PM
Media 78 Enable visual serv . â to set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual serv . > Automatically . You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted. When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio. â Recorder You can record pieces of sp eech, sound, or an active call. This is useful when recording a name and phone number for writing them down later. Record sound 1. Select Menu > Media > Re corder . 2. To start recording, select . To st art recording d uring a call, select Options > Record . While recording a call, all parties to the call hear a faint beeping sound. When recording a call, hold the phone in the normal position near to your ear. 3. To stop recording, select . The recording is saved in Gallery > Recordings . 4. To listen to the latest recording, select Options > Play last recorded . 5. To send the last recording us ing bluetooth or as a multimedia message, select Options > Send last recorded . List of recordings 1. Select Menu > Media > Re corder > Options > Recordings list . The list of folders in the Gallery is shown. 2. Open Recordings to see the list with recordings. 3. Select Options to select options for files in the Gallery . See â Gallery,â p. 72. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 78 Wednesday, November 29 , 2006 2:00 PM
Media 79 Define a storage folder To use a folder other than Recordings as the default folder in the Gallery , select Menu > Media > Recor der > Options > Select memory and a folder from the list. â Equalizer You can control the sound quality when using the music player by amplifying or attenuating frequency bands. 1. Select Menu > Media > Equaliser . 2. To activate a set, scroll to one of the equalizer sets, and select Activate . 3. To view, edit, or rename a selected set, select Options > View , Edit , or Rename . Not all sets can be edited or renamed. â Stereo widening This function can only be used if your Nokia mobile phone is connected to a compatible stereo headset. To enhance the sound that is availa ble in stereo with a wider stereo effect, select Menu > Media > Stereo widening > On . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 79 Wednesday, November 29 , 2006 2:00 PM
Push to talk 80 12. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network se rvice). PTT provides direct voice communication. To connect, press the volume up key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call i s connected, the people you are calling do not have to answer the phone. The participants should confirm the reception of any communication where appropriate, as there is no other confirmation wh ether the recipients have heard the call. To check availability and costs, and to subscribe to the service, contact your service provider. Roaming serv ices may be more limited than for normal calls. Before you can use the PTT service, you must define the required PTT service settings. Se e âÂÂPTT settings,â p. 85. While you are connected to the PTT service, you can use the other functions of the phone. The PTT service is not connected to traditional voice communication; therefore many of the services available for traditional voice calls (for example, voice mailbox) are not available for PTT communication. â Connect and disconnect To connect to the PTT service, select Menu > Push to talk > Switch PTT on . indicates the PTT connection. indicates that the service is temporarily unavailable. The phone aut omatically tries to reconnect to the service until you disconnect from th e PTT service. If you have added channels to the phone, you are automatically joined to the active channels. To disconnect from the PTT service, select Switch PTT off . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 80 Wednesday, November 29 , 2006 2:00 PM
Push to talk 81 â Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, use the phone normally by holding it to your ear. Warning : Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one ca lls. One-to-one calls are calls you make to only one person. Press and hold the volume up key the entire time you are talking, and hold the phone in front of you so that you can see the display. When you are finished, release the volume up key. Talking is allowed on a first come, first served basis. When someon e stops talking, the first person to press the key used for PT T can talk next. To check the login status of your contacts, select Men u > Push to talk > Contacts list . This service depends on your service provider and is only available for subscribed contacts. indicates the contact is available. indicates the contact is not logged into the PTT service. indicates the contact is unknown. indicates the contact does not want to be disturbed. You cannot call the contact, but you can send a callback request. To subscribe a contact, select Options > Subscribe contact ; or if one or more contacts are ma rked, select Subscribe marked . Make a channel or a group call To make a call to the default channel, press the volume up key. A tone sounds, indicating that the access is granted, and the phone displays your nickname and channel na me. See âÂÂPTT cha nnels,â p. 84. To make a call to a nondefault channel, select Channel list in the PTT menu, scroll to the channel you want, and press the volume up key. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 81 Wednesday, November 29 , 2006 2:00 PM
Push to talk 82 To make a group call from Contacts , the recipients must be connected to the PTT service. Select Menu > Contacts > Group s , scroll to the group you want, and press the volume up key. Make a one-to-one call To start a one-to-one call from the lis t of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the volume up key. You can also select the contact from Contacts . To start a one-to-one call from the list of PTT channels, select Channel list , and scroll to the channel you want. Select Members , scroll to t he contact you want, and press the volume up key. To start a one-to-one call from the list of callback requests you have received, select Callback inbox . Scroll to the contact you want, and press the volume up key. Make a PTT call to multiple recipients You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and must accept the call to participate. Select Menu > Push to talk > Contacts list , and mar k the contacts you want. To make the call, press the volume up key. The contacts who accept the call are shown. Receive a PTT call A short tone notifies you of an incoming PTT call. Information such as the channel name or the nickname (n etwork service) of the caller is displayed. If you have set the phone to first noti fy you of one-to-one calls, accept or reject the call. If you press the volume up key to try to respond to a call while another member is talking, you hear a tone, and Queuing is displayed as long as you press the volume up key. Press and hold the volume up key, and wait for the other person to finish; then you can talk. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 82 Wednesday, November 29 , 2006 2:00 PM
Push to talk 83 â Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. Send a callback request You can send a callback request in the following ways: ⢠To send a callback request from the contacts list in the Push to talk menu, select Contacts list . Scroll to a contact , and select Options > Send PTT callback . ⢠To send a callback request from Contacts , search for the contact you want, select Details , scroll to the PTT address, and select Options > Send PTT callback . ⢠To send a callback request from the channel list in the Push to talk menu, select Channel list , and scroll to the channel you want. Select Members , scroll to the contact you want, and select Options > Send PTT callback . ⢠To send a callback request from the callback request list in the Push to talk menu, select Callback inbox . Scroll to a contact, and select Options > Send PTT callback . Respond to a callback request When you receive a callback request, Callback request received is shown in the standby mode. Select View . The list of contacts who have sent you callback requests is shown. ⢠To make a one-to-one call, press the volume up key. ⢠To send a call request back to the s ender, select Options > Send PTT callback . ⢠To delete the request, select Options > Delete callback . ⢠To view the sender's PTT address, select View . ⢠To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 83 Wednesday, November 29 , 2006 2:00 PM
Push to talk 84 â Add a one-to-one cont act You can save the names of persons to whom you often make one-to-one calls in the following ways: ⢠To add a PTT address to a name in Contacts , search for the desired contact, and select Details > Options > Add detail > PTT address . ⢠To add a contact to the P TT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact . ⢠To add a contact from the channel li st, conne ct to the PTT service, select Channel list , and scroll to the channel you want. Select Members , scroll to the member whose co ntact information you want to save, and select Options . To add a new contact, select Save as . To add a PTT address to a name in Contacts , select A dd to contact . â PTT channels When you call a channel, all members joined to the channel hear the call simultaneously. There are three ty pes of PTT channels: Provisioned channel â A permanent channel created by the service provider. Public channel â Every channel member can invite other persons. Private channel â Only persons who receive an invitation from the channel creator can join in. Add a channel To add a public or priv ate channel, select Menu > Push to talk > Add channel , and edit the settings in the form fields: Channel status: â Select Ac t ive or Inactive . Chnl. nickname: â Enter your nickname for the channel. Chnl. security: â Select Public channel or Private channel . To send an invitation to the group, select Ye s when the phone requests it. You can send the invitation using SMS. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 84 Wednesday, November 29 , 2006 2:00 PM
Push to talk 85 To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit add. manually . Enter the channel address provided by your service provider. Receive an invitation When you receive a text message invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View . 2. To add the channel to your phone, select Save . 3. To set the status for the channel, select Acti ve or Inactive . 4. To reject the invitation, select View > Discard > Ye s . â PTT settings There are two kinds of PTT settings: settings for connecting to the service and settings for use. You may receive the settings for connecting to the service from your network operator or service provide r. See âÂÂConfiguration settings service,â p. 10. You can enter the settings manually. See âÂÂConfiguration,â p. 67. To select the settings for connecting to the service, select Menu > Push to talk > Config. settings and one of the followi ng options: Configuration â to select a service provider, Default , or Personal config. for PTT service. Only the configurations that support the PTT service are shown. Account â to select a PTT service account in the active configuration settings. You can also select from other available options. To edit the PTT settings for us e, select Menu > Push to talk > PTT settings , and one of the following options: 1 to 1 calls > On â to set the phone to allow the reception of one-to- one calls. To make but not rece ive one-to-one calls, select Off . The RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 85 Wednesday, November 29 , 2006 2:00 PM
Push to talk 86 service provider may offer some services that override thes e settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify . PTT key default function > Open contact list , Open channel list , Call contact/group , or Call PTT channel Show my login status > Ye s â to enable the sending of the login status PTT status in startup > Ye s or Ask first â to set the phone to automatically connect to the PTT service when you switch on the phone Push to talk when abroad â to switch the PTT service on or off when the phone is used outside of the home network Send my PTT address > No â to hide your PTT address f rom calls RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 86 Wednesday, November 29 , 2006 2:00 PM
Organizer 87 13. Organizer Your Nokia mobile phone has many useful features for organizing your everyday life. Th e following features are found in Organiser : alarm clock, calendar, to-do list, notes, calculator, countdown timer, and stopwatch. â Alarm clock The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is turned off if there is enough power in the battery. To set the alarm, select Menu > Organiser > Alarm clock > Al arm time , and enter the alarm time. To change the alarm time when the alarm time is set, select On . To set the phone to alert you on selected days of the week, select Repeat alarm . To select the alarm tone or set a ra dio channel as the alarm tone, select Menu > Organiser > Alarm clock > Alarm tone . If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last channel you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default alarm tone replaces the radio. To set a snooze time-out, select Snooze time-out , and the time you want. Alert tone and message The phone sounds an alert tone and flashes Alarm! and the current time on the display, even if the phone is switched off. To stop the alarm, select Stop . If you let the phone continue to sound the alarm for a minute or select Snooze , the alarm stops for the selected snooze time-out and then resumes. If the alarm time is reached while the device is switched off, the de vice switches itself on and starts sounding the al arm tone. If you select Stop , the device asks whether you want to activa te the device for calls. Select No to switch off the RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 87 Wednesday, November 29 , 2006 2:00 PM
Organize r 88 device or Ye s to make and receive calls. Do not select Ye s when wireless phone use may cause interference or danger. â Calendar The calendar helps you keep track of reminders, calls that you need to make, meetings, and birthdays. Select Menu > Organiser > Cal endar . The current day is indicated by a fr ame in the month vi ew. If there are any notes set for the day, the day is in bold type. To view the day notes, select View . To view a week, se lect Options > Week vi e w . To delete all notes in the calendar, select the month or week view and Options > Delete all notes . Other options for the calendar day view are make a note; delete, edit, or move a note; copy a note to another day; send a note with Bluetooth wireless technology; or send a note as a text message or multimedia message to the calendar of another compatible phone. In Settin gs , you can set the date and time settings. In the Auto-delete notes option, you can set the phone to delete old note s automatically after a specified time. Make a note Select Men u > Organiser > Calendar , the date you want, and Options > Make a note and one of the following note types: Meeting , Call , Birthday , Memo or Reminder . Note alarm The phone beeps, and displays the note. If a call note appears, to call the displayed number, press the call key. To stop the alarm and to view the note, select View . To stop the alarm for 10 minutes, select Snooze . To stop the alarm without viewing the note, select Exit . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 88 Wednesday, November 29 , 2006 2:00 PM
Organizer 89 â To-do list You can save a note for a task that yo u have to do, select a priority level for the note, and mark it as done when you have completed it. You can sort the notes by priority or by date. To-do notes 1. Select Menu > Orga niser > To-do list . 2. If no note is added, select Add note; otherwise, select Options > Add . 3. Write the note, select the priority, set the deadline and the alarm type for the note, and select Save . 4. To view a note, scroll to it, and select View . â Notes Use Notes to write and send notes to compatible devices by using SMS or MMS. 1. Select Menu > Organi ser > Notes . 2. To make a note if one is not added, select Add note ; otherwise, select Options > Make a note . 3. Write the note, and select Save . 4. To view a note, scroll to it, and select View . â Calculator The calculator in your phone provides basic arithmetic and trigonometric functions, calculates th e square and the square root, the inverse of a number, and converts currency values. Note: This calculator has limite d accura cy and is designed for simple calculations. Select Menu > Org aniser > Calculator . Press # for a decimal point. Scroll to the desired operation or function, or select it from the Options . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 89 Wednesday, November 29 , 2006 2:00 PM
Organize r 90 To save the exchange rate, select Options > Exchange rate . To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign . â Timer 1. Select Menu > Organiser > Timer > Normal timer ; enter the alarm time in hours, minutes, and seconds; and select OK . You can write your own note text, which will display when the time expires. 2. To start the timer, select Start . 3. To change the countdown time, select Change time . 4. To stop the timer, select Stop timer . If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text (if it is set) or Countdown time up . Stop the alarm by pressing any ke y. If no key is pressed, the alarm automatically stops within 60 seconds. To stop the alarm and to delete the note text, select Exit . To restart the countdown timer, select Restart . â Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the ot her functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 90 Wednesday, November 29 , 2006 2:00 PM
Applications 91 14. Applications â Games Your phone software includes some games. Launch Select Menu > Applications > Games , scroll to the game you want, and select Open . For options related to a game, see âÂÂOther application options,â p. 91. Downloads Select Menu > Applications > Options > Downloads > Game downloads . The list of available bookmarks is shown. Important: Only install and use applications and other software from sources that offer adequate securi ty and protection against harmful software. Settings To set sounds, lights, and shakes for the game, select Menu > Applications > Options > App. settings . â Collection Your phone software includes some Java applications, such as a world clock. Launch an application Select Menu > Applications > Collection ; scroll to an application; and select Open , or press the call key. Other application op tions Delete â to delete the application or application set from the phone RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 91 Wednesday, November 29 , 2006 2:00 PM
Applications 92 Details â to give additional information about the application Update version â to check if a new ver sion of the application is available for download from the Web (network service) App. access â to restrict the application from accessing the network. Different categories are shown. Se lect in each category one of the available permissions. Web page â to provide further information or additional data for the application from an Internet page (netwo rk service). It is only shown if an Internet addres s has been provided with the application. Download applications Important: Only install and use applications and other software from sources that offer adequate securi ty and protection against harmful software. Your phone supports J2ME⢠Java ap plications. Make sure that the application is compatible with your phone before downloading it (network service). You can download new Java appl ications in different ways: ⢠Select Menu > Applications > Options > Downloads > App. downloads , and the list of available bookmarks is shown. For the availability of different serv ices, pricing, an d tariffs, contact your service provider. ⢠Use the game download func tion. See âÂÂDownloads,â p. 91. ⢠Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone. Your device may have some bookmarks load ed for site s not affiliated with Nokia. Nokia does not warrant or endorse these si tes. If you choose to access them, you should ta ke the sa me precau tions, fo r securi ty or con tent, a s you woul d with any Internet site. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 92 Wednesday, November 29 , 2006 2:00 PM
Web 93 15. W eb Your phone has a built-in browser you can use to connect to selected services on the mobile Internet. Many wireless mobile Internet access features are netw ork-dependent, and some features may not be available. Contact your service provider for more information. â Techno logy background A technology called wireless applic ation protocol (WAP) is to mobile devices what the world wide web (WWW) is to personal computers. Most WAP sites are made up of te xt and hyperlinks. Some pages even contain low-resolution graphi cs, or require data input. You may not be able to view all the details of the mobile Internet pages, as page appearance may va ry due to screen size. â Service provider Because mobile Internet content is de signed to be viewed from your phone, your service provider is now your mobile Internet service provider as well. It is likely that your service provider has created a home page and set up your WAP browser to go to this page when you log on to the mobile Internet. Once at your serv ice providerâÂÂs home page, you may find links to a number of other sites. â Access service Set up service You may receive the configuration se ttings required for browsing as a configuration message from the network operator or service provider that offers the service that you want to use. See âÂÂConfiguration settings service,â p. 10. You can also ente r all the configuration settings manually. See âÂÂConfiguration,â p. 67. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 93 Wednesday, November 29 , 2006 2:00 PM
Web 94 Activate the settings Ensure that the Web settings of the service you want to use are activated. 1. Select Menu > We b > Settings > Configuration settings > Configuration . Only the configurations that support the browsing service are shown. 2. Select a service provider or P ersonal config. for browsing. 3. Select Account and a browsing service account contained in the active configuration settings. 4. If you want to perform manual user authentication for intranet connections, select Display terminal window > Ye s . Connect to a service There are several ways to conn ect to a service. ⢠To open the serviceâÂÂs home page, select Menu > We b > Home ; or in the standby mode, press and hold 0 . ⢠To select a bookmark, select Menu > Web > Bookmarks . ⢠To select the last viewed we b site, select Me nu > Web > Last web address . ⢠To enter the address of the servic e, select Menu > Web > Go t o address , enter the address of the service, and select OK . â Browse It should not be necessary to manually configure the browser on your phone. Normally this is done by yo ur service provide r once you have subscribed to the feature. Contact your service provider if you have problems using the browser. After you make a connection to the se rvice, yo u can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 94 Wednesday, November 29 , 2006 2:00 PM
Web 95 If EGPRS or GPRS is selected as the data bearer, either or is shown in the top left of the display du ring browsing. If you receive a call or a text message, or make a call during an EGPRS or GPRS connection, or is shown in the top right of the display to indicate that the EGPRS or GPRS connection is susp ended (on hold). After a call, the phone tries to reconnect the EGPRS or GPRS connection. Phone keys ⢠To browse through the page, press the scroll key in any direction. ⢠To select a highlighted item, press the call key. ⢠To enter letters and nu mbers, press the ke ys, 0 to 9 . ⢠To enter special characters, press * . Options Beside the options available on your device, your service provider may offer other options. Direct calling The browser supports functions that you can access while browsing. You can make a phone call or save a na me and a phone number from a page. Appearance settings While browsing, select Options > Other options > App ear . settings ; or in the standby mode, select Menu > Web > Settin gs > Appearance settings and one of the following options: Text wrapping > On â to s et the text to continue on th e next line in the display. If you select Off , the text is abbreviated. Font size â to set the font size for mobile Internet pages. Show images > No â to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures. Alerts > Alert for unsecure connection > Ye s â to set the phone to alert when a encrypted connection changes to an unencrypted one during browsing. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 95 Wednesday, November 29 , 2006 2:00 PM
Web 96 Alerts > Alert for unsecure it ems > Ye s â to set the phone to alert when a encrypted page contains an uns ecure item. These a lerts do not guarantee a secure connection. For more information, see âÂÂBrowser security,â p. 98. Character encoding > Content encoding â to select the encoding for the browser page content Character encoding > Unicode (UTF-8) web addresses > On â to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a web page cr eated in a foreign language. Screen size > Full or Small â to set the screen layout JavaScript > Enable â to enable Java Script⢠â Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See âÂÂCache memory,â p. 98. While browsing, select Options > Other options > Security > Cookie settings ; or in the standby mode, select Menu > We b > Settings > Security settings > Cookies . To allow or prevent the phone receiving cookies, select Allow or Reject . Scripts over secure connection You can select whether to allow th e running of scripts from a secure page. The phone supports WML scripts. While browsing, select Options > Other options > Security > WMLScript sett. ; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection . To allow the scripts, se lect Allow . â Bookmarks You can save page a ddresses as bookmarks in the phone memory. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 96 Wednesday, November 29 , 2006 2:00 PM
Web 97 1. While browsing, select Options > Bookmarks ; or in the standby mode, select Menu > Web > Bookmarks . 2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or move the bookmark to a folder. Your device may have some bookmarks load ed for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precau tions, for security or content, as you would with any Internet site. Receive When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. The rece ived bookmark is saved automatically to Bookmarks . To view it, select Show > Bookmarks . â Download settings To automatically save all downloaded files in the Gallery , select Menu > Web > Settings > Downloading settings > Automatic saving > On . â Service inbox The phone is able to receive service messages (p ushed messages) sent by your service provider (network provider). Servic e mess ages are notifications (for example, news headlines). These messages may contain a text message or an add ress of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show . If you select Exit , the message is moved to the Service inbox . To access the Service inbox later, select Menu > We b > Ser vice inbox . Settings Select Menu > We b > Settings > Service inbox settings . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 97 Wednesday, November 29 , 2006 2:00 PM
Web 98 To set whether you want to re ceive service message, select Se rvice messages > On or Off . To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On . To view the list of the approved content authors, select Trusted channels . To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On . If you select Off , the phone activates the browser only after you select Retrieve when the phone has received a service message. â Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The inform ation or services you have accessed is stored in the cache. To empty the cache, while browsing, select Options > Other options > Clear the cache . To empty the cache, while in the standby mode, select Menu > We b > Clear the cache . â Browser security Security features may be required for some services, such as online banking or shopping. For such connections, you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificat es are saved in the security module by the service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 98 Wednesday, November 29 , 2006 2:00 PM
Web 99 Select Menu > Settings > Security > Security module settings and one of the following options: Security module details â to show the security module title, manufacturer, and serial number Module PIN request â to set the phone to ask for the module PIN when using services provided by the se curity module. Enter the code, and select On . To disable the module PIN request, select Off . Change module PIN â to change the module PIN, if allowed by the security module. Enter the current module PIN code, then the new code twice. Change signing PIN â to change the signing PIN code for the digital signature. Select the signing PIN you want to change. Enter the current PIN code, then the new code twice. See also âÂÂAccess codes,â p. 9. Certificates Important: Even if the use of certificat es makes the risks involved in remote connections and software in stallation considerably smaller, they must be used correctly in orde r to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificat es have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct . Before changing any certificate sett ings, you must make sure that you really trust the owne r of the certific ate and that the certificat e really belongs to the listed owner. There are three kinds of certifi cat es: serve r certificates, au thority certificates, and user certificates. You may receive th ese certificates from your service provider. Authority certificates and user certificates may also be saved in the securi ty module by the service provider. To view the list of the authority or user certificates downlo aded into your phone, select Menu > Settings > Security > Authority certif icates or User certificates . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 99 Wednesday, November 29 , 2006 2:00 PM
Web 100 The security indicator is displaye d during a connection, if the data transmission between the phone and the content server is encrypted. The security icon does not indicate th at the data transmission betw een the gateway and the content server (or place where the requested re source is stored) is secure. The service provider secure s the data transmission between the gateway and the content server. Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, such as the title of the book you want to buy and its price. The text to sign is displayed, which may include the amount and date. Check that the header text is Read and that the digital signature icon is shown. If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign . The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN (see âÂÂAccess codes,â p. 9), and select OK . The digital signature icon disappears, and the servic e may display a confirmation of your purchase. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 0 Wednesd ay, November 29, 2006 2 :00 PM
SIM services 101 16. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates, and informatio n on using SIM services, contact your service provider. To access these services , it may be ne cessary to send me ssages or make a phone call for which you may be charged. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 1 Wednesd ay, November 29, 2006 2 :00 PM
Computer connectivity 102 17. Computer connectivity You can send and receive e-mail, an d access the Inte rnet when y our phone is connected to a compatible PC through Bluetooth or USB data cable (CA-53) connection. You can use your phone with a variety of PC connectivity and data communications applications. â USB data storage You can use the USB data cable to transfer data between the memory card inserted in the phone and a c ompatible PC. See âÂÂUSB data cable,â p. 64. After transferring data, ensure that it is safe to unplug the USB data cable from the PC. â Nokia PC Suite Nokia PC Suite software is available for your phone. Nokia PC Suite is a collection of powerful tools that you can use to manage your phone features and data. Each component is a separate program that includes online helps. Nokia PC Suite softwa re, installation instructions, and other documentation is provided free of charge and can be downloaded from the software downloads of the Nokia web site: www.nokia.com/pcsuite . â EGPRS, GPRS, HSCSD, and CSD You can use the enhanced GPRS (EGP RS), general packet radio service (GPRS), high-speed circuit switched da ta (HSCSD), circuit switched data (CSD), and GSM data services with your phone. For availability and subscription to da ta services, contact your service provider. The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data tr ansfer. See âÂÂPacket data settings,â p. 62. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 2 Wednesd ay, November 29, 2006 2 :00 PM
Computer connectivity 103 â Data communicati on applications For information on using a data c ommunication application, refer to the documentation provided with it. Making or answering phone calls du ring a computer connection is not recommended, as it might disrupt the operation. â Bluetooth Use Bluetooth technology to connect your compatible laptop to the Internet. Your phone must have activated a service provider that supports Internet access and your PC has to support Bluetooth PAN (Personal Area Network). After conne cting to the network access point (NAP) service of the phone and pairing with your PC your phone automatically opens a packet data co nnection to the Internet. PC Suite software installation is not necessary when using the NAP service of the phone. See âÂÂBluetooth wireless technology,â p. 60. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 3 Wednesd ay, November 29, 2006 2 :00 PM
Enhanc ements 104 18. Enhancements If you want to enhance phone functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 4 Wednesd ay, November 29, 2006 2 :00 PM
Battery information 105 19. Battery information â Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or th ree complete charge and discharge cycles. The battery can be charged and di scharged hundreds of times, but it will eventually wear out. When the talk and standby times are not iceably shorter than normal, replace the battery. Us e only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the b attery has not been used for a prolonged period, it ma y be necessary to connect th e charger then disconnect and reconnect it to begin charging the bat tery. Unplug the charger from the electrical plug and the devi ce when not in use. Do not leave a fully charged battery connecte d to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the disp lay or before any calls can be made. Use the battery only for its intended pu rpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accide ntal short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive ( ) and negative (-) terminals of the battery. (The se look like metal strips on the battery.) This might happe n, for examp le, when you carry a spare battery in your pocket or purse. Short-circuiti ng the terminals may damage t he battery or the connecting object. Leaving the battery in hot or cold places , such as in a closed car in summer or winter conditions, will reduce t he capacity and lifetime of the battery. Always try to keep the battery between 15ðC and 25ðC (59ðF and 77ðF). A device with a hot or cold battery may not wo rk temporarily, even when the battery is fully charged. Battery performance is particularly limi ted in temperat ures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local re gulations. Please recycle when possible. Do not dispose as household waste. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 5 Wednesd ay, November 29, 2006 2 :00 PM
Battery information 106 â Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements l ogo on the packaging, and inspect the hologram label using the following steps: Successful completion of t he four steps is not a total assurance of the authenticity of the battery. If you have an y reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia servic e point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be veri fied, return the battery to the plac e of purchase. Authenticate hologram 1. W hen looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678 919876543210. Turn the battery so that t he numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 6 Wednesd ay, November 29, 2006 2 :00 PM
Battery information 107 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/ batterycheck. To create a text message enter the 20-digit code, for example, 1234567891987 6543210, and send to 44 7786 200276. National and international operator charges will apply. You should receive a mes sage indicating whether the code can be authenticated. What if your battery is not authentic? If you cannot confirm that y our Nokia ba ttery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer ma y be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 7 Wednesd ay, November 29, 2006 2 :00 PM
Care and main tenance 108 Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. ⢠Keep the d evice dry. Precipitat ion, humidity and all types of liquids or moisture can contain minerals that will corrod e electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. ⢠Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. ⢠Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage bat teries, and warp or melt certain plastics. ⢠Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form insi de the device and damage electronic circuit boards. ⢠Do not attempt to open the device othe r than as instructed in this guide. ⢠Do not drop, knock, or shake the devi ce. Rough handling can break internal circuit boards and fine mechanics. ⢠Do not use harsh che micals, cleaning so lvents , or strong detergents to clean the device. ⢠Do not paint the device. Paint can clog the moving parts and prevent proper operation. ⢠Use a soft, clean, dry cloth to clean any lens es (such as camera, proximity sensor, and light sensor lenses). ⢠Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachme nts could damage the device and may violate regulations governing radio devices. ⢠Use chargers indoors. ⢠Always create a backu p of data you want to keep (such as contact s and calendar notes) before sending yo ur device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not work ing properly, take it to the nearest authorized service facility for service. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 8 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 109 Additional safety information Your device and its enhancemen ts may cont ain small parts. Keep them out of the reach of small children. â Operating environment Remember to foll ow any special regulati ons in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operat ing positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or w hen positioned at lea st 1.5 centimeters (5/8 inch) from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should po sition the device the above-stated distance from your body. To transmit data f iles or messages, this device requires a quality co nnection to the network . In some cases, transmission of data files or messages may be delayed until such a conne ction is available. Ensure the above separation distance instructions ar e followed until the transmission is completed. Parts of the device are magneti c. Metallic materials may be attracted to th e device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. â Medical devices Operation of any radio transmitting eq uipment, including wireless phones, may interfere with the functionality of in adequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from ex te rnal RF energy or if you have any questions. Switch off your device in he alth care facilit ies when any regulations posted in these areas instruct you to do so . Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be mainta ined between a wireless phone and a pacemaker to avoid potential interfe rence with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Pers ons with pacemakers should do the following : RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 9 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 110 ⢠Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker ⢠Not carry the device in a b reast pocket ⢠Hold the device to t he ear opposite the pacemaker t o minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital w ireless devices may inte rfere with some hearing aids. If interference occurs, consult your service provider. â Vehicles RF signals may affect improperly insta lled or inadequately shielded electronic systems in motor vehicles such as electr onic fuel injection sy stems, electronic antiskid (antilock) braking systems, el ectr onic speed control systems, an air bag systems. For more information, check with the manuf actur er or it s repres entati ve of your vehicle or any equi pment that has been added. Only qualified personnel sh ould service the de vice, or install the device in a vehicle. Faulty installation or servic e may be dangerous and may invalidate any warranty that may apply to the device. Ch eck regularly that all wireless device equipment in your vehicle is mounted an d operat ing properly. Do not store or carry flammable liquids, gases, or explosi ve materials in the same compartment as the device, its parts, or enhancements . For vehicles equipped with an air bag, remember that air bags inflate with grea t force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in- vehicle wireles s equipment is improperly installe d and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the ai rcraft, disrupt the wireless telephone network, and may be illegal. â Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Pot entially explosive atmospheres include areas where you would normally be advi sed to turn off your vehicle engine. Sparks in such areas could cause an explos ion or fire resulting in bodily injury or even death. Switch off the device at re fueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 0 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 111 depots, storage, and d istribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearl y marked. They include belo w deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (s uch as propane or butane), and area s where the air contains ch emicals or particles such as grain, dust, or metal powders. â Emergency calls Important: Wirele ss phones, including t his device, operate usi ng radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in t he device. 2. Press the end key as many times as n eeded to clear the display and ready the device for calls. 3. Enter the official emergency number for your p resent location. Emergency numbers vary by location. 4. Press the call key. If certain features are in use, you may firs t need to turn tho se features off before you can make an emergency call. Consult th is guide or your servi ce provider for more information. When making an emergency ca ll, give all the necessary information as accurate ly as possible. Your wireless device may be the only means of co mmunication at the scene of an accident. Do not end the ca ll until given permission to d o so. â Certificatio n information (SAR) This mobile device meets guidelin es for exposure to radio waves Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were deve loped by the independent scientific organisation ICNIRP and include safe ty margins designed to assure the protection of all persons, regardless of age and he alth. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 1 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 112 The exposure guidelines for mobile devices employ a uni t of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) av eraged over 10 grams of t issue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highes t certified power level in all tested frequency bands. The actual SAR level of an operat ing devi ce can be below the maximum value because the device is designed to use only the power required to reach the network. That amount chan ges depending on a number of factors such as how close you are to a network base station. The highest SAR valu e under the ICNIRP guidelines for use of the device at the ear is 1.15 W/kg. Use of device acces sories and enhancemen ts may result in different SAR values. SAR values may vary depending on nation al reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.noki a.com. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 2 Wednesd ay, November 29, 2006 2 :00 PM
Index 113 Index A access codes 9 active standby 20 , 59 alarm clock 87 antenna 16 B batter y charge 13 strength indicator 19 bluetooth 60 bookmarks 96 brows er 94 busine ss card s 51 C calculator 89 calendar 88 call answer 25 end 24 log 53 make 24 optio ns 26 reject 25 voice mail 44 waiting 25 camera lens 18 use 73 contacts add 49 copy 50 delete 50 delete details 50 edit 50 memory in use 51 my numbers 52 search 49 service numbers 52 D dialing 24 downloads content and applications 11 settings 97 E e-mail application 40 emergency calls 111 enhancements 104 I instant messaging 36 K keyguard 22 keys and parts 18 M maintenance 108 media player 74 memory card format 72 installation 14 slot 18 menu 27 messages audio 35 flash 35 info 44 multimedia 31 SIM 31 templates 35 text 28 voice 43 music player 75 my shortcuts 58 N network services 7 Nokia PC Suite 102 RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 3 Wednesd ay, November 29, 2006 2 :00 PM
Index 114 notes 89 O operator logo 57 operator menu 71 P phone software updates 70 plug and play service 15 profiles 55 PTT. See push to talk push to talk callback requests 83 channel call 81 channels 84 connect 80 discon nect 80 group call 81 make and receive calls 81 one-to-one call 82 settin gs 85 R radio 76 S safety certification information (SAR) 111 emergency calls 111 explosive environments 110 hearing aids 110 medical devices 109 pacemaker s 109 vehicles 110 service commands 44 inbox 97 settings call 65 configuration 67 enhancement 67 message 45 modem 62 phone 66 restore factory 69 security 68 time and date 58 tones 56 shared memory 8 SIM card 12 standby mode 19 standby mode shortcuts 21 stereo widening 79 summary after call 65 synchronization 63 T text entry 29 themes 55 to-do list 89 V voice commands 59 W wallpaper 56 wrist strap 17 RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 4 Wednesd ay, November 29, 2006 2 :00 PM
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that t his RM-198 product is in compliance with the essential requi remen ts and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. The crossed-out wheeled bin means th at within the European Union the product must be take n to sepa rate collection at the product end- of-life. This applies to your devi ce but also to any e nhancements marked with this symbol. Do not di spose of these products as unsorted municipal waste. For more informatio n, see product Eco-Declaration or countr y spec ific inf o rmation at www.nokia.com. Copyright é 2006 Nokia. All rights reserved. Nokia, Nokia Connecting People, Pop-Port, PC Suite, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Nokia tune is a sound mark of Nokia Corporation. US Patent No 5818437 and other pendin g patents. T9 text input software Copyright é 1999-2006. T egic Communica tions, Inc. All rig hts reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for per sonal and noncommercial use in connection with inform ation which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <h ttp://www.mpegla.com>. 0434 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 2 Wednesday, No vember 29, 2006 2:00 PM
Nokia operates a policy of continuous devel opment. Nokia reserves the right to make changes and improvements to any of the produ cts described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is ". Except as required by applicable law, no warranties of any kind, either express or imp lied, including, but not limited to, the implied warranties of merchantability and fitness for a part icular purpose, are made in relation to the accuracy, reliability or contents of this documen t. Nokia reserves the right to revise this document or withdraw it at an y time without prior notice. The availability of particular pr oducts may vary by region. Please check with the N okia dealer nearest to you. EXPORT CONTR OLS This device may contain co mm odities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited. 9251038/Issue 1 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 3 Wednesday, No vember 29, 2006 2:00 PM
4 Contents For your safety.......................... 6 General information ................. 9 Access codes ............. ..................... .......... 9 Copyright protection ........................ .. 10 Configuration settings service ........ 10 Download content and applications 11 Nokia support and contact information .................... ..................... .. 11 1. Get started ........................ . 12 SIM card and battery installation .. 12 Charge the battery....... ..................... .. 13 Memory card installation ............... .. 14 Switch the phone on and off ......... .. 15 Open the fold ..... ........................... ....... 15 Normal operating position ............... 16 Wrist strap ..... ........................... ............ 17 2. Your phone ......................... 18 Keys and parts.... ...................... ............ 18 Standby mode .......................... ............ 19 Indicators and icons .................... ....... 21 Keypad lock (keyguard) ......... ............ 22 3. Call functions. .................... 24 Make a call .... ..................... .................. 24 Speed dialing . ..................... .................. 24 Enhanced voice dia ling............... ....... 24 Answer or reject a call ................ ....... 25 Options during a call ........................ .. 26 4. Phone menus........... ........... 27 Menu views ......................... .................. 27 Access a menu funct ion ........ ............ 27 5. Messaging .......................... 28 Text messages ............................... ....... 28 SIM messages ..................... .................. 31 Multimedia messages ................. ....... 31 Nokia Xpress audio messaging ........ 35 Instant messaging .................... ........... 36 E-mail application ......................... ..... 40 Voice messages ......... ........................... 43 Info messages ................. ..................... 44 Service commands ......... ..................... 44 Delete messages ....................... ........... 44 Message settings. ........................... ..... 45 6. Contacts ................... ........... 49 Search ......... ........................... ................ 49 Save names and phone numbers .... 49 Save numbers, items, or an image . 49 Copy a contact..... ........................... ..... 50 Edit contact details . ...................... ..... 50 Delete contacts or de tails................. 50 Business cards ...... ..................... ........... 51 Settings ....... ...................... ..................... 51 Groups ......... ........................... ................ 51 Speed dialing ........ ........................... ..... 51 Service and my numbers ................... 52 7. Call log ..................... ........... 53 Positioning information .................... 53 8. Settings ............................... 55 Profiles ........................ ........................... 55 Themes ........ ........................... ................ 55 Tones............ ...................... ..................... 56 Display .................... ..................... ........... 56 Time and date ........... ...................... ..... 58 My shortcuts ................... ..................... 58 Connectivity .............. ........................... 60 Call .......... ..................... ........................... 65 Phone................ ...................... ................ 66 Enhancements ..... ........................... ..... 67 Configuration .................. ..................... 67 Security .................. ........................... ..... 68 Restore factory setting s ............... ..... 69 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 4 Wednesday, No vember 29, 2006 2:00 PM
5 Phone software updates ......... ........... 70 9. Operator menu ................... 71 10. Gallery .............................. 72 Format memory card .......................... 72 11. Media ............................... 73 Camera ................... ..................... ........... 73 Media player .............................. ........... 74 Music player .................... ...................... 75 Radio . ...................... .......................... ...... 76 Recorder . .......................... ...................... 78 Equalizer................. ..................... ........... 79 Stereo widening ........................ ........... 79 12. Push to talk ..................... 80 Connect and disconnect .................... 80 Make and receive a PTT call ............. 81 Callback requests ........... ...................... 83 Add a one-to-one contact ..... ........... 84 PTT channels ... ........................... ........... 84 PTT settings ..... ...................... ................ 85 13. Organizer.......................... 87 Alarm clock...................... ...................... 87 Calendar ................. .......................... ...... 88 To-do list ................ .......................... ...... 89 Notes ............ ..................... ...................... 89 Calculator ........ ...................... ................ 89 Timer ................. ...................... ................ 90 Stopwatch ....... ........................... ........... 90 14. Applications ..................... 91 Games ............................... ...................... 91 Collection .... ........................... ................ 91 15. Web..................... .............. 93 Technology background ...... ............... 93 Service provider .................... ............... 93 Access service ................... .................... 93 Browse ..................... ...................... ......... 94 Security settings ......... ..................... .... 96 Bookmarks ......... ........................... ......... 96 Download settings ............... ............... 97 Service inbox ......... ........................... .... 97 Cache memory............. ......................... 98 Browser security .............. .................... 98 16. SIM services .................. 101 17. Computer connectivity . 102 USB data storage ........................ ...... 102 Nokia PC Suite.. ........................... ...... 102 EGPRS, GPRS, HSCSD, and CSD .... 102 Data communication applications 103 Bluetooth ................ ........................... . 103 18. Enhancements .............. . 104 19. Battery infor mation ...... 105 Charging and discharging .. ............ 105 Nokia battery auth entication guidelines........... ..................... ............ 106 Care and maintenance ........ 108 Additional safety information ..... ..................... 109 Index .................................... . 113 RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 5 Wednesday, No vember 29, 2006 2:00 PM
For your safety 6 For your safety Read these simple guidelines. Not follow ing them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wi reless phone use is pr ohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always kee p your hands free to op erate the vehicle while driving. Your first co nsideration while driving should be road safety. INTERFERENCE All wireless phones may be suscepti ble to interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any restrictions . Switch the phone off near medical equipment. SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless de vices can cause interference in aircraft. SWITCH OFF WHEN REFUELING Do not use the phone at a refueling point. Do not use near fuel or chemicals. SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the phone where blasting is in progress. USE SENSIBLY Use only in the nor mal posi tion as explained in the product documenta tion. Do no t touch the ante nna unneces sarily. QUALIFIED SERVICE Only qualified personnel may in stall or repair this product. ENHANCEMENTS AND BATTERIE S Use only approved enhancements and batterie s. Do not connect incompatible products. RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 6 Wednesday, No vember 29, 2006 2:00 PM
For your safety 7 WATER-RESI STANCE Your phone is not water-resi stant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information st ored in your phone. CONNECTI NG TO OTHER DEVICES When connecting to any other device, read its user gui de for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on an d in service. Press the end key as many times as needed to clear th e display and return to the start screen. Enter the emergency number , then press the call key. Give your location. Do not end the call until given permission to do so. â About your device The wireless device described in this guid e is approved for use on the EGSM 850, 900, 1800, and 1900 networks. Contact your service provider for more information about networks. When using the features in this device , obey all laws and respect privacy and legitimate rights of others, including copyrights. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Warning: To use any features in this de vice, other than the a larm clock, the device must be switched on. Do not switch the device on when wireless device use may caus e interference or danger. â Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explai n what charges will apply. Some networks may have limitations that affect how yo u can use network services. For instance, some networks may not support all langua ge-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, th ey will not appear on your device menu. Your RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 7 Wednesday, No vember 29, 2006 2:00 PM
For your safety 8 device may also hav e been specially configured. This configurat ion may include changes in menu names, m enu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device , such as multimedia messaging s ervice (MMS), browsing, e-mail application, instant messagi ng, remote synchronization, and content dow nloadi ng using the browser or MMS, require network support for these technologies. â Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, i nstant messages, e-mail, cal endar, to-do notes, and Java TM games and applications. Use of one or more of these features may reduce the memory available for the re maining features sharing memory. For example, sa ving many Java applicatio ns may use all of th e available memory. Your devi ce may disp lay a message that th e memory is ful l when you try to use a shared memory feature. In this case, d elete some of the information or entries stored in the shared memory features before continuing. Some of the features , such as text messages may have a certain amount of memory specially allotted to them in ad dition to the memory shared with other featu res. â Enhancements, batt eries, and chargers Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 charger. This device uses BL-5C batteries. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular m odel. The use of any other types may invalidate any approval or wa rranty, and may be dangerous. For availability of approved enhancemen ts, please check with your de aler. A few practical rules about a ccessories and enhancements. ⢠Keep al l access ories a nd enhancements out of the reach of small children. ⢠When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. ⢠Check regularly that enhancements in stalled in a vehicle are mounted and are operating properly. ⢠Installation of any complex car enhanc ements must be made by quali fied personnel only. RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 8 Wednesday, No vember 29, 2006 2:00 PM
General information 9 General information Congratulations on your purchase of this Nokia mobile phone. Some of its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. â Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see âÂÂSecurity,â p. 68. If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for five minutes, and enter the code again. PIN codes The personal identification numbe r (PIN) code and the universal personal identification number (UPIN) code (four to eight digits) help to protect your SIM card against unauthorized use. See âÂÂSecurity,â p. 68. The PIN code is usually supplied with the SIM card. To set the phone to request the PIN code, see âÂÂSecurity,â p. 68. The PIN2 code (four to eight digits) may be supplied with the SIM card and is required for some functions. The module PIN is required to access the information in the security module. See âÂÂSecurity module,â p. 98. The module PIN is supplied with the SIM card if the SIM card has a security module in it. The signing PIN is required for th e digital signature. See âÂÂDigital signature,â p. 100. The signing PIN is supplied with the SIM card if the SIM card has a security module in it. RM-198_UG_en1_issue1_correcti ons_20061108.fm Pa ge 9 Wednesday, No vember 29, 2006 2:00 PM
General information 10 PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (eight digits) is required to change a blocked PIN code and UPIN code, respec tively. The P UK2 code is requ ired to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your service provider for the codes. Barring password The barring password (four digits) is required when using Call barring service . See âÂÂSecurity,â p. 68. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider for assistance. â Copyright protection Copyright protections may pr event some images, music (including ringing tones), and other content from being copied , modified, transferred or forw arded. â Configuration settings service To use some of the network services , such as mobile Internet services, MMS, or remote Internet server synchronization, your phone needs the correct configuration settings. You ma y be able to receive the settings directly as a configuration message. After receiving the settings, you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability of the settings, co ntact your service provider. When you ha ve received a configuration message, Configuration sett. received is displayed. To save the settings, select Show > Save . If the phone requests Enter settings' PIN: , en ter the PIN code for the settings, and select OK . To receive the PIN code, contact th e service provider who supplies the settings. If no settings are saved yet, these setti ngs are saved a nd set as RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 Wednesday, November 29 , 2006 2:00 PM
General information 11 default configuration settings. Otherwise, the phone asks, Activate saved configuration settings? To discard the receiv ed settings, select Show > Discard . To edit the settings, see âÂÂConfiguration,â p. 67. â Download content and applications You may be able to download content, such as themes, tones, and video clips, to the phone (network service). Select the download function (for example, in the Gallery m e n u ) . T o a c c e s s t h e downlo ad function, see the respective menu descriptions. For av ailability of different services, pricing, and tariffs, contact your service provider. Important: Use only services that you trus t and that offer adequate security and protection against harmful software. â Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest additional information, downloa ds, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contac t customer service, check the list of local Nokia Care contact cente rs at www.nokia.com/customerservice. For maintenance services, ch eck your nearest Nokia Care s ervices location at www.nokia.com/repair. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 Wednesday, November 29 , 2006 2:00 PM
Get started 12 1. Get started â SIM card and battery installation Always switch the device off, and disconnect the charger before removing the batter y. Keep all SIM cards out of the reach of small children. For availability and information on usin g SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. The SIM card and its contacts can ea sily be damaged by scratches or bending, so be careful when handlin g, inserting, or removing the card. To install the SIM card: 1. Press firmly and slide the top of the back cover to release it; then remove the back cover by lifting it from the phone. 2. After you have removed the back cover, insert your fingernail under the battery, and lift it as shown. 3. Place a fingernail in the middle of the metal SIM card holder. Then, unlatch and swing the SIM card holder open. 4. Insert the SIM card into the holder as shown, beveled co rner first, with the gold-colored contacts on the SIM card face up (away from the phone). 5. Swing the SIM card holder closed. The gold-colored contacts on the SIM card meet the gold-colored contac ts on the inside of the phone. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 12 Wednesday, November 29 , 2006 2:00 PM
Get started 13 Gently press the SIM card holder into the phone until it clicks into place. 6. Replace the battery, by positioning it (with the label side facing up), so the gold-colored contacts match up with those on the phone. Slide the battery in until it snaps into place. 7. Slide the back cover until it locks into place. â Charge the batter y 1. Connect the charger to a standard wall outlet. 2. Insert the charger plug into the round jack in the bottom of the phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. 3. Disconnect the charger from the phone when the battery is fully charged. You can use the phone while the charger is connected. The charging time depends on the charger and the battery used. For example, charging a BL-5C battery with the AC -3 charger takes approximately 2 hours and 20 minutes while the phone is in the standby mode. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 13 Wednesday, November 29 , 2006 2:00 PM
Get started 14 â Memory card installation Use only compatible microS D cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and th e device and corrupt data stored on the card.. You can use a memory card to extend the memory of the Gallery . See âÂÂGallery,â p. 72. You can insert or change the memory card without turning the phone off. Important: Do not remove the memory card in the middle of an operation when the card is being a ccessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To insert a memory card, use a fingernail as a lever, place it in the recessed area of the memory card holder and swing the holder open (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted and that the gold-colored contacts on the card are facing upwards. Cl ose the memory card holder (3). You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in the Gallery . To remove the memory card, use a finger nail as a lever. Place it in the recessed area of the memory card holder and swing the holder open. Push gently with a finger nail against the card to loosen it from the holder. Then pull the card out. Close the memory card holder. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 14 Wednesday, November 29 , 2006 2:00 PM
Get started 15 To format the memory card, see âÂÂFormat memory card,â p. 72. â Switch the phone on and off Press and hold the end key until the phone switches on or off. If the phone asks for a PIN, enter the code, and select OK . Plug and play service When you turn on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network servic e). Confirm or reject the query. See Connect to service provider support in âÂÂConfiguration,â p. 67 and âÂÂConfiguration settings service,â p. 10. â Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 15 Wednesday, November 29 , 2006 2:00 PM
Get started 16 â Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna . Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the devi ce is s witched on. Contact with the antenna affects call quality and ma y cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating t h e device optimizes the antenna performance and the battery life. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 16 Wednesday, November 29 , 2006 2:00 PM
Get started 17 â Wrist strap Remove the back cover from the phone and thread a strap as shown in the picture. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 17 Wednesday, November 29 , 2006 2:00 PM
Your phon e 18 2. Y our phone â Keys and parts ⢠Earpiece (1) ⢠Main display (2) ⢠Left, middle, and right selection keys (3) ⢠Four-way navigation key (4) ⢠Call key (5) ⢠End key ends calls (short keypress) and turns phone on and off (long keypress) (6) â¢K e y p a d ( 7 ) ⢠Camera lens (8) ⢠Mini display (9) ⢠Memory card holder (10) ⢠Loudspeaker (11) ⢠Microphone (12) ⢠Pop-Port connector TM (13) ⢠Charger connector (14) ⢠Camera release key (15) ⢠Volume is activated by volume down/up key (short keypress ), voice dialing is activated by RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 18 Wednesday, November 29 , 2006 2:00 PM
Your phone 19 volume down key (long keypress) and Push to talk (PTT) is activated by volume up key (long keypress) (16) â Standby mode When you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone. ⢠Network signal strength (1) ⢠Battery strength indicator (2) ⢠Clock (3) â if the time is set to appear on the display. See âÂÂTime and date,â in âÂÂSettings,â p. 58. ⢠The name of the service provider or the operator logo (4) ⢠Calendar (5) â the date is displaye d if it is set to appear on the display and the active standby is not set. See âÂÂAct ive standby mode,â p. 20 and âÂÂTime and date,â p. 58. ⢠Active standby (6). See âÂÂActive standby mode,â on p. 20. ⢠The left selection key (7) is Go to or a shortcut to another function. See âÂÂLeft selection key,â p. 58. ⢠The middle selection key (8) mode is Menu . ⢠The right selection key (9) may be Names to access the list of contacts in the Contacts menu, an operator spec ific name to access an operator specific Web site, or a shortcut to a function that you selected. See âÂÂRight selection key,â p. 59. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 19 Wednesday, November 29 , 2006 2:00 PM
Your phon e 20 Active standby mode In the active standby mode, the phone can display separate content item windows, such as general indicators and operator logo (1), shortcuts (2), audio functions (3), and the calendar (4). To select whether the active standby is shown, see Active standby in âÂÂStandby mode settings,â p. 56. The active standby is in passive mode when the middle selection key (5) is Menu ; you can only view content. To activate the navigation mode and scroll through the content, use the navigation key. To change the ke y for accessing the navigation mode, see Active standby key in âÂÂStandby mode settings,â p. 56. When the arrow indicators are shown, you ca n scroll the item left and right. To personalize and organize the active standby conte nt, select Options and select a corresponding option. See âÂÂStandby mode settings,â p. 56. To exit the navigation mode, select Exit . If no keys are pressed afte r a certain period of time, the phone au tomatically returns to the passive mode. Content items in navigation mode Shortcut bar â To select a shortcut, scroll to the function you want and select it. To change or organize th e shortcuts when in the navigation mode, select Options > Personalise . Radio and Music â To turn on the radio or the music player, scroll to and select it. To change a track in th e music player, scroll down or up. To start the radio channel search, scroll and hold left or right. Calendar â To view todayâÂÂs notes, select the one you want. To view the notes for the previous or next days, scroll left or right. My note â To enter a note, select the content window , write your note, and save it. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 20 Wednesday, November 29 , 2006 2:00 PM
Your phone 21 Countdown timer â To start the coun tdown timer, select the content item. T he rem ainin g time wi th a no te is s hown. Gener al indi cat ors â To show standby indicators, such as date, cell info display, info messages, PTT default group name, and closed user group index. The date is shown if the calendar is not selected as active st andby content. Standby mode shortc uts To access the list of dialed numbers, press the call key once. See âÂÂMake a call,â p. 24. To call your voice mailbox (network se rvice) when you have saved your voice mailbox number in th e phone, press and hold 1 . To connect to a browser service, press and hold 0 . To set shortcut functions for the navigation key, see Navigation key in âÂÂMy shortcuts,â p. 58. To make a call by pressing a nu mber key with an assigned phone number, see âÂÂSpeed dialing,â p. 24. To toggle between the General profile and the Silent profile, press and hold # . â Indicators and icons Your phone has two types of ide ntifiers: indicators and icons. Indicators See âÂÂStandby mode,â p. 19 for information on indicators. Icons Icons are graphical representations of a specific item or situation. The following list describes each icon. You have unread messages in the Inbox folder. You have unsent, canceled, or failed messages in the Outbox folder. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 21 Wednesday, November 29 , 2006 2:00 PM
Your phon e 22 The phone registere d a missed call. You have received one or several instant messages, and you are connected to the instant messaging service. The keypad is locked. The alarm clock is set to On . The phone does not ring for an incoming call or text message. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to the GPRS or EGPRS network. / A GPRS or EGPRS connection is established. / The GPRS or EGPRS connection is suspended (on hold), for example, if there is an incoming or outgoing call during an EGPRS or GPRS dial-up connection. A Bluetooth connection is active. If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number. The loudspeaker is activated, or the music stand is connected to the phone. Calls are limited to a closed user group. The timed profile is selected. â Keyp ad lock (keyguard) The keyguard disables your keypad to prevent accidental keypresses. ⢠To lock th e keypad, se lect Menu , and press * within 3.5 seconds. ⢠To unlock the keypad, select Unlock , and press * within 1.5 seconds. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 22 Wednesday, November 29 , 2006 2:00 PM
Your phone 23 ⢠To enable automatic keyguard, select Menu > Settings > Phone > Automatic keyguard > On . Set the delay in minutes and seconds in which the keypad locks. If the Security keyguard is set to On , enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked. When the keyguard is on, calls still may be possible to the official emergency number programmed into yo ur device. Enter the e mergency number and press the call key. For information about Security keyguard , see âÂÂPhone,â p. 66. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 23 Wednesday, November 29 , 2006 2:00 PM
Call functions 24 3. Call functions â Make a call 1. Enter the phone number, including the area code. To delete an incorrect character, select Clear . For international calls, press * twice for the international prefix (the character replaces the international access code); and then enter the country code, the area code with out the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key, or select Options > End call . â Speed dialing Assign a phone number to one of the speed dialing keys, 2 to 9. Call the number by one of the following ways: ⢠Press a speed dialing key, and then press the call key. â¢I f Speed dialling is set to On , press and hold a speed dialing key until the call is started. See Speed dialling in âÂÂCall,â p. 65. â Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. A voice c ommand is added automatically to all entries in the contact list of the phone. Make a voice dialing call If an application is sending or re ceiving data using a packet data connection, end the application before you use voice dialing. Voice commands are language-dependent. To set the language, see V oice recognition language in âÂÂPhone,â p. 66. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 24 Wednesday, November 29 , 2006 2:00 PM
Call functions 25 Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and h old the right selection key. A short tone is played, and Speak now is displayed. If you are using a compatible headse t with the headset key, press and hold the headset key to start the voice dialing. 2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. Th e phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and sele ct to dial the entry. Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in âÂÂMy shortcuts,â p. 58. â Answer or reject a call ⢠Open the fold, or press the call key to answer the call. To mute the ringing tone, select Silence , if the fold is open or if the fold is closed, press the volume up/down key. ⢠To reject an incoming call when the fold is open, press the end key. If Divert if busy is activated in your voic e mailbox, the call is forwarded to your voice mail. If not, the call is rejected. If a compatible headset supplied with the headset key is connected to the phone, press the headset key to answer and end a call. Call waiting Call waiting is a network service. To answer the waiting call during an active call, press the ca ll key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see âÂÂCall,â p. 65. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 25 Wednesday, November 29 , 2006 2:00 PM
Call functions 26 â Options during a call Many of the options that you can us e during a call are network services. For availability, contact your service provider. To increase or decrease the volume du ring a call, press the volume up or down key on the side of the phone. Select Options during a call and the following options may be available. Send DTMF â to send tone strings Swap â to switch between the active call and the call on hold Tran sf er â to connect a call on hold to an active call and disconnect yourself Conference â to make a conference call that allows up to five persons to take part in a conference call Private call â to discuss privately in a conference call Do not hold the device near your ea r when the loudspeaker is in use, because the volume may be extremely loud. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 26 Wednesday, November 29 , 2006 2:00 PM
Phone menus 27 4. Phone menus Phone features are grouped accordin g to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and personalize phone features. Scroll to access these menus and submenus. Some menus may not be available, de pending on your network. For more information, contact your service provider. â Menu views Your phone may have two types of menu views: List and Grid . In the List interface, images introduce every menu. Scroll to navigate through the menus. As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab mov es up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure. In the Grid interface, multiple menu icons appear on a single display. Use the four-way navigation key to scroll through the icons. The name of the menu appears at the top of the display and the icon for the selected menu is outlined. To change the menu view, sele ct Menu > Options > Main menu view > List or Grid . â Access a menu function 1. Select Menu and the menu you want. 2. If the menu contains submenus, select the one that you want. 3. If the selected menu contains further submenus, select the one that you want 4. To return to the previous menu level, select Back . To exit the menu, select Exit . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 27 Wednesday, November 29 , 2006 2:00 PM
Messaging 28 5. Messaging You can use mobile messages to keep in touch with friends, family, and business associ ates by using the short message service (SMS), which is a network service. Not a ll messaging features are available in all wirele ss networks. Contact your service provider for availability and subscription information. When sending messages, your phone may display the words Message sent . This is an indication that the me ssage has been sent by your device to the message center number programme d into your device. This is not an indication that the message has been received at the intended destination. For more details about me ssaging services, check with your service provider. â Text messages Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accord ingly. Characters that use accents or other marks, and characters from some la nguage options like Chinese, take up more space limiting the number of charac ters that can be sent i n a single message. A message length indicator appears at the top of the phone display. This indicator allows you to see how many characters remain in the message as you are entering text. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of two messages. You can use predefined templates to help you write text messages. Before you can send any text or e- mail messages, you need to configure the message settings. See âÂÂMessage settings,â p. 45. To check SMS e-mail servic e availability and to subscribe to the service, contact your service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 28 Wednesday, November 29 , 2006 2:00 PM
Messaging 29 Text entry To enter text while writing messages, use traditional or predictive text input. When using traditional te xt input, press a number key, 1 to 9 , repeatedly until the character you want is displayed. In predictive text input you can enter a letter with a single keypress. When you write text, appears at the top left of the display, indicating predictive text input, and is displayed, indicating traditional text input. , , or is displayed next to the text input indicator, indicating the charac ter case. To change the character case, press # . indicates number mode. To change from the letter to number mode, press and hold # , and select Number mode . Settings To set the writing language to a la nguage other than that selected, select Options > Writing language . Predictive text input is only available for the languages on the list. To set the predictive text input option, select Options > Prediction on , or to set traditional text input option, select Options > Prediction off . To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options . Predictive text input Predictive text input allows you to write text quickly by using the phone keypad and a built-in dictionary. 1. Start writing a word, using the keys, 2 to 9 , and press each key only once for one letter. The word changes after each keystroke. 2. When you finish writing the word and it is correct, press 0 . 3. If a displayed word is not correct, press * repeatedly, or select Options > Matches . When the word that you want is displayed, select Use . 4. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell . The phone displays the entered letters. Enter the word (traditional text input is used), and select Save . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 29 Wednesday, November 29 , 2006 2:00 PM
Messaging 30 Traditional text input Press a number key, 1 to 9 , repeatedly until the ch aracter you want is displayed. Not all characters available under a number key are printed on the key. The characte rs available depend on the selected writing language. See âÂÂSettings,â p. 29. If the next letter you want is located on the same key as the present one, wait until the cursor is displayed, or scroll in any direction, and enter the letter. To access the most common punctuat ion marks and special characters, press 1 . To insert a space, pr ess 0 . If you want more characters, press * . Write and send 1. Select Menu > Messaging > Create message > Text message and enter the recipientâÂÂs phone number in the To: field. 2. To retrieve a phone number from Contacts , select Add > Contact . To send the message to multiple recipie nts, add the contacts you want one by one. 3. To send the message to pe rsons in a group, select Contact group and the group you want. To retrieve th e contacts to which you recently sent messages, sel ect Add > Recently used . 4. Scroll down and enter a mess age. See âÂÂTex t entry,â p. 29. 5. To insert a template to the text message, select Options > Use template and the template you want to insert. 6. To see how the message will look to the recipient, select Options > Preview . 7. To send the message, sele ct Send . Read and reply When you receive mess ages, either 1 message received or N messages received is displayed, where N is the number of new messages. 1. To view a new message, select Show . To view it later, select Exit . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 30 Wednesday, November 29 , 2006 2:00 PM
Messaging 31 To read the message later, select Menu > Messaging > Inbox . If more than one message has been receiv ed, select the message that y ou want to read. indicates an unread message in Inbox . 2. While reading a message, select Options , and delete or forward the message, edit the message as a te xt message or an SMS e-mail or move it to another folder, or view or extract message details. You can also copy text from the beginning of the message to your phone calendar as a reminder note. 3. To reply to a message, select Reply > Text message , Multimedia , Flash message , or Audio message . T o s e n d a t e x t m e s s a g e t o a n e-mail address, enter the e-mail address in the To: field. 4. Scroll down and enter a message in the Message: field. See âÂÂText entry,â p. 29. If you want to change the message type for your reply message, select Options > Change msg. type . 5. To send the message, select Send . â SIM messages SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages ar e saved to the phone memory. To read SIM messages, select Menu > Messaging > Options > SIM messages . â Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The a ppearance of a message may vary depending on the receiving device. A multimedia message can contain text , sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it . Some networks allow text messages that include an Internet address wher e you can view the multimedia message. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 31 Wednesday, November 29 , 2006 2:00 PM
Messaging 32 You cannot receive multimedia messages during a call or an active browsing session over GSM data . Because delivery of multimedia messages can fail for var ious reasons, do not rely solely upon them for essential communications. Write and send a multimedia message The wireless network may limit the size of mult imedia messages. If the inserted picture exceeds this li mit, the device may make it smaller so that it can be sent by MMS. To set the settings for multimedia messaging, see âÂÂM ultimedia,â p. 46. To check availability and to subscribe to the multimedia messaging service, contact your service provider. 1. Select Menu > Messaging > Create message > Multimedia . 2. Enter a message. Se e âÂÂText entry,â p. 29. Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. 3. To in sert a sl ide in t he messa ge, sel ect New ; or select Options > Insert > Slide . 4. To view the message before sending it, select Options > Preview . 5. Scroll down and select Send . See âÂÂMessage sending,â p. 33. 6. Enter the recipientâÂÂs phone number in the To: field. To retrieve a phone number from Contacts , select Add > Contact . To send the message to multiple recipients, add the contacts you want one by one. To send the message to pe rsons in a group, select Cont act group and the group you want. To retrieve the contacts to which you recently sent messages, select Add > Recently used . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 32 Wednesday, November 29 , 2006 2:00 PM
Messaging 33 Message sending When you finish writing your messag e, to send the message, select Send , or press the call key. The ph one saves the message in the Outbox folder, and sending starts. If you select Save sent messages > Ye s , the sent message is saved in the Sent items folder. See âÂÂGeneral settings,â p. 45. When the phone is sending the me ssage, the animated is shown. Actual receipt of a me ssage depends on a numbe r of factors. For more details about messaging services, check with your service provider. It takes more time to send a multime dia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occu rs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending . Read and reply Important: Exercise caution when ope ning messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. When you receive multime dia messages, either Multimedia message received or N messages received is displayed, where N is the number of new messages. 1. To read the message, select Sh ow . To view it la ter, se lect Exi t . To read the message later, select Menu > Messaging > Inbox . In the list of messages, indicates an unread message. Select the message that you want to view. 2. To view the whole message if the received message contains a presentation, select Play . To view the files in the presentation or the attachments, select Options > Obje cts or Attachments . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 33 Wednesday, November 29 , 2006 2:00 PM
Messaging 34 3. To reply to the message, select Options > Reply > Text message , Multimedia , Flash message , or Audio message . Write the reply message. If you want to change the messag e type for your reply message, select Options > Change msg. type . The new message ty pe may not support all the content that you have added. 4. To send the message, sele ct Send . See âÂÂMessage sending,â p. 33. Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive msgs. is shown. To delete old messages, select OK > Yes and the folder. Scroll to the message you want, and select Delete . If you want to delete more than one message at the same time, scroll to one of the messages you wa nt to delete and select Options > Mark . Scroll to each additional message you want to delete and select Mark or if you want to delete all the messages, select Options > Mark all . When you have finished marking the mess ages you want to delete, select Options > Delete marked . Folders The phone saves received text an d multimedia messages in the Inbox folder. To set the phone to save the sent messages in the Sent items folder, see Save sent messages in âÂÂGeneral settings,â p. 45. To see any message you want to send later and have save d as a draft in the Drafts folder, select Menu > Messaging > Drafts . You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items > Saved messages or a folder you added. To add a new folder for your messages, select Option s > Add folder . To delete or rename a folder, scroll to the folder you want, and select Options > Delete folder or Rename folder . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 34 Wednesday, November 29 , 2006 2:00 PM
Messaging 35 Your phone has templates. To create a new template, save or copy a message as a template. To access the template l ist, select Menu > Messaging > Saved items > Templates . Flash messages Flash messages are text me ssages that are instantly displayed upon reception. Flash me ssages are not automatically saved. Write a flash message Select Menu > Messaging > Create message > Flash message . Enter the recipientâÂÂs phone number in the To : field. Write your message in the Message: field. The maximum length of a flas h message is 70 characters. To send the message, select Send . Receive a flash message A received flash message is indicated with Message: , followed by a few words from the beginning of the message. To read the message, select Read . To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail . â Nokia Xpress audio messaging You can use the multimedia message se rvice to create and send voice messages conveniently. Multimedia messaging service must be activated before you can use audio messages. Create an audio message 1. Select Menu > Messaging > Create message > Audio message , a nd to start recording. 2. To stop recording, select an d a message screen is displ ayed. 3. To view the available options, select Options . 4. Enter the recipientâÂÂs phone number in the To: field. To retrieve a phone number from Contacts , select Add > Contact . To send the message to multiple recipients, add the contacts you want one at a time. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 35 Wednesday, November 29 , 2006 2:00 PM
Messaging 36 To send the message to pe rsons in a group, select Cont act group and the group you want. To retrieve the contacts to which you recently sent messages, select Add > Recently used . 5. To send the message, sele ct Send . Receive an audio message When your phone receives audio messages, either 1 audio message received , or N messages received is displayed, where N is the number of new messages. To open the mess age, select Play ; or if more than one message is received, select Show > Play . To listen to the message later, select Exit . Select Options to see the available options. â Instant messaging You can take text messaging to the next level by experiencing instant messaging (IM) (network service) in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the In ternet) they are using, as long as you all use the same instant messaging service. Before you can start using instant me ssaging, you must first subscribe to your wireless service providerâÂÂs text messaging service and register with the instant messaging service you want to use. You must also obtain a user name and password be fore you can use instant messaging. See âÂÂRegister with an instant me ssaging service,â p. 37 for more information. Depending on both your IM service provider and your wireless service provider, you may not have access to a ll of the features described in this guide. To set the required settings for th e insta nt mess aging s ervic e, see Connect. settings in âÂÂAccess,â p. 37. The ic ons and texts on the display may vary, depending on the instant messaging service. While you are connected to the inst ant messaging service, you can use the other functions of the phone, and the instant messaging conversation remains active in the background. Depending on the RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 36 Wednesday, November 29 , 2006 2:00 PM
Messaging 37 network, the active instant messa ging conversation may consume the phone battery faster, and you may need to connect the phone to a charger. Register with an instant messaging service You can do this by registering over the Internet with the IM service provider you have selected to use. Du ring the registration process, you will have the opportunity to create th e user name and password of your choice. For more information about signing up for instant messaging services, contact your wi reless service pr ovider. Access To access the Instant messages menu while still offline, select Menu > Messaging > Instant messages ( Instant messages may be replaced by another term depending on the servic e provider). If more than one set of connection settings for instant messa ging service is available, select the one you want. If there is only one set defined, it is selected automatically. The following options are shown: Login â to connect to the instant messa ging service. To set the phone to automatically connect to the instant messaging service when you switch on the phone; in the login session, scroll to Automatic login: and select Change > On , or select Menu > Messaging > Instant messages , connect to the instant mess aging service, and select Options > Settings > Automatic login > On or Off . Saved convers. â to view, erase, or rename the convers ations that you saved during an in stant messaging session Connect. settings â to edit the settings needed for messaging connection Connect To connect to the instant messaging service, access the Instant messages menu, select the instant mess aging service, if needed, and RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 37 Wednesday, November 29 , 2006 2:00 PM
Messaging 38 select Login . When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Options > Logout . Sessions When connected to the instant messagin g service your status as seen by others is shown in a status line: Status: Online , My status: Busy or Status: App. off. â to change own status, select Change . Below the status line ther e are thre e fol ders containing your contacts and showing their status: Convers. , Onli ne and Offline . To expand the folder highlight it and select Expand (or press scroll right), to collapse the folder select Collapse (or press scroll left). Conversations â shows the list of new and read instant messages or invitations to instant messaging du ring the active instant messaging session. indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation. The icons and texts on the display may vary, depending on the instant messaging service you have selected. Online â shows the number of contacts that are online. Offline â shows the number of contacts that are offline. To start a conversation, expand th e Online or the Offline folder and scroll to the contact with whom you would like to chat and select Chat . To answer an invitation or to reply to a message expand the Conversations folder and scroll to the contact to whom you would like to chat and select Open . To add contacts, see âÂÂAdd IM contacts,â p. 40. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 38 Wednesday, November 29 , 2006 2:00 PM
Messaging 39 Options > Search IM users â to search for other instan t messaging users on the network by mobile phone number, alias, e-mail address, fir st name or last name. Options > Chat â to start the conversation when you have found the user that you want. Accept or reject an invitation In the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Re ad . If more than one invitation is received, scroll to the invit ation you want, an d select Open . To join the private group conversation, select Accept , and enter the s creen name you want to use as your nickname. To reject or delete the invitation, select Options > Reject or Delete . Read an instant message In the standby mode, when you are connected to the instant messaging service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed.To read it, select Read . If you receive more than one message, N new instant messages appears in the display, where N is the number of new messages. Select Read , scroll to a message, and select Open . New messages received during an active conversation are held in Instant messages > Conversations . If you receive a message from someone who is not in IM contacts , the sender ID is displayed. To save a new contact that is not in the phone memory, select Opt ions > Save contact . Participate in a conversation To participate in a conversation, write your message; and select Send , or press the call key. Select Options to view the available options. If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 39 Wednesday, November 29 , 2006 2:00 PM
Messaging 40 Write your message; and select Send , or press the call key. Your message is displayed, and the reply message is displayed below your message. Add IM contacts When connected to the IM service, in the IM main menu select Options > Add contact . Select By mobile number , Enter ID manually , Search from serv . , or Copy from server (depending on service provider). When the contact is successfully added, the phone confirms it. Scroll to a contact. To start a conversation, select Chat . Block or unblock messages When you are in a conv ersation an d want to block messages, select Options > Block contact . A confirmation query is shown, select OK to block messages from this contact. To block messages from a specific contac t in your contacts list, scroll to the contact in Conversations , Online or Offline and select Options > Block contact > OK . To unblock a contact, in the IM main menu select Options > Blocked list . Scroll to the contact you want to unblock and select Unblock > OK . Groups You can create your own private groups for an IM conversation. The private groups exist only during an IM conversation. Connect to the IM service, and from the main menu select Options > Create group . Enter the name for the grou p and the screen name that you want to use as your nickname. Mark the private group members in the contacts list, and write an invitation. â E-mail application The e-mail application uses a packet data connection (network service) to allow you to access your e-mail account from your phone when you are not in the office or at home. This e-mail applicat ion is different from RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 40 Wednesday, November 29 , 2006 2:00 PM
Messaging 41 the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system. You can write, send, and read e-mail wi th your phone. You can also save and delete the e-mail on a compatible PC. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mail messages, you must do the following: ⢠Obtain a new e-mail account or us e your current account. To check the availability of your e-mail a ccount, contact your e-mail service provider. ⢠Check your e-mail settings with your network operator or e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See âÂÂConfiguration settings service,â p. 10. You can also enter the setting s man ually. See âÂÂC onfiguration,â p. 67. To edit the e-mail settings, select Menu > Messaging > E-mail > Options > Manage accounts . This application does not support keypad tones. Settings Wizard The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New . The Manage accounts options all ow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct pr eferred access point for your operator. See âÂÂConfiguration,â p. 67. The e-mail application requires an Internet access point without a proxy. WAP access points normally in clude a proxy and do not work with the e-mail application. Write and send an e-mail You can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 41 Wednesday, November 29 , 2006 2:00 PM
Messaging 42 1. Select Menu > Messaging > E-mail > Write new e-mail . 2. If more than one e-mail account is defined, select the account from which you want to send the e-mail. 3. Enter the recipientâÂÂs e-mail address. 4. Write a subject for the e-mail. 5. Enter the e-mail messa ge. See âÂÂText entry,â p. 29. To attach a file to the e-mail, select Options > Attach file and a file from Gallery . 6. To send the e-mail message immediately, select Send > Send now . To save the e-mail in the Outbox folder to be sent later, select Send > Send later . To edit or continue writing your e-mail later, select Options > Save as draft . The e-mail is saved in Outboxes > Drafts . To send the saved e-mail from the outbox, select Menu > Messaging > E-mail > Options > Send e-mail or Send/check e-mail . Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail . If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only down loads e-mail headers at first. 2. Select Back . 3. Select Inboxes , the account name, the new message, an d Retrieve to download the complete e-mail message. To download new e-mail messages an d to send e-mail that has been saved in the Outbox folder, select Options > Send/check e-mail . Read and reply to e-mail Important: Exercise cauti on when opening messages . E-mail messages may contain malicious software or ot herwise be harmful to your device or PC. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 42 Wednesday, November 29 , 2006 2:00 PM
Messaging 43 1. Select Menu > Messaging > E-mail > Inboxes , the account name, and the desired message. 2. While reading the message, select Options to view the available options. 3. To reply to an e-mail, select Reply > Original text or Empty message . To reply to many, select Options > Reply to all . Confirm or edit the e-mail address and subject, then write your reply. 4. To send the message, select Send > Send now . E-mail folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: âÂÂAccount nameâ for incoming e-mail, Archive for archiving e-mail, Custom 1 â Custom 3 for sorting e-mail, and Junk where all spam e-mail is stored. The Outboxes folder contains the following folders: Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options to view the available options of each folder. Spam filter The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list messages are filtered to the Junk folder. Unknown and White list messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender . â V oice messages If you subscribe to voice mail (netwo rk service), your service provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 43 Wednesday, November 29 , 2006 2:00 PM
Messaging 44 both. If you receive more than on e message, your phone shows the number of messages received. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages . To enter, search for, or edit your voice mailbox number, select V oice mailbox number . If supported by the network, indi cates new voice messages. Select Listen to call your voice mailbox number. â Info messages With the Info messages network service, you can receive short text messages from your service provider. To check availability, topics, and the relevant topic numbers, co ntact your service provider. â Service comma nds Use the Service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about specific service commands. Select Menu > Messaging > Service commands . â Delete messages To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the message yo u want to delete, and select Delete . If you want to delete more than one message at the same time, scroll to one of the messages you wa nt to delete, and select Options > Mark . Scroll to each additional message you want to delete, and select Mark or if you want to delete all the messages, select Options > Mark all . When you have finished marking th e messages you want to delete, select Options > Delete marked . To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the fold er from which you want to delete the messages. Depending on the folder, the phone asks if you want to delete the messages. To delete, select Ye s . Other wise, if the folder contains unread messages or messages which are waiting to be sent, the phone RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 44 Wednesday, November 29 , 2006 2:00 PM
Messaging 45 asks whether you want to keep the m. To keep these messages, select Ye s . To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Ye s . â Message settings General settings General settings are common for text and multimedia messages. Select Menu > Messaging > Message settings > General settings and one of the following options: Save sent messages > Ye s â to set the phone to save the sent messages in the Sent items folder Overwriting in Sent items â to select if overwr iting takes place when messages are sent and th e message memory is full Font size â t o s e l e c t t h e f o n t s i z e u s e d i n m e s s a g e s Graphical smileys > Ye s â to set the phone to replace character-based smileys with graphical ones Text messages The text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages. Select Menu > Messaging > Message settings > Text messages and one of the following options: Delivery reports â to select whether the ne twork sends delivery reports about your messages (network service) Message centres > Add centre â to set the phone number and name of the message center that is requir ed for sending text messages. You receive this number from your se rvice provider. If you select SIM msg. centre , you can view the SIM me ssage center information. Message centre in use â to select the message center in use RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 45 Wednesday, November 29 , 2006 2:00 PM
Messaging 46 E-mail message centres > Add centre â to set the phone numbers and name of the e-mail center for sen ding SMS e-mails. If you select SIM e-mail cntr . , you can view the SIM e-mai l center information. E-mail centre in use â to select the SMS e-mail message center in use Message validity â to select the length of time for which the network attempts to deliver your message Messages sent via > Tex t > P agi ng , or Fax â to select the format of the messages to be sent (network service). Use packet data > Ye s â to set GPRS as the pr eferred SMS bearer Character support > Full â to select all characters in the messages to be sent as viewed. If you select Reduced , characters with accents and other marks may be converted to other ch aracters. When writing a message, you can check how the message will look to the recipient by previewing the message. See âÂÂWrite and send,â p. 30. Reply via same centre > Ye s â to allow the recipient of your message to send you a reply using your me ssage center (netw ork serv ice) Multimedia The multimedia message settings affe ct the sending, receiving, and viewing of multimedia messages and audio messages. You may receive the configuration se ttings for multimedia messaging as a configuration message. See âÂÂConfiguration settings service,â p. 10. You can also enter the settings ma nually. See âÂÂConfiguration,â p. 67. Select Menu > Messaging > Message settings > Multimedia msgs. and one of the following options: Delivery reports > Ye s â to ask the network to send delivery reports about your messages (network service) Image size (multimedia) â to define the default image size used in multimedia messages Default slide timing â to define the default time between slides in multimedia messages Allow multimedia reception > Yes or No â to receive or block the multimedia message. If you select In home network , you cannot receive RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 46 Wednesday, November 29 , 2006 2:00 PM
Messaging 47 multimedia messages when outside your home network. The default setting of the multimedia me ssage service is generally In home network . Incoming multimedia messages â to allow the reception of multimedia messages automatically, manually afte r being prompted, or to reject the reception. This setting is not shown if Allow multimedia reception is set to No . Allow adverts â to receive or reject advert isements. This setting is not shown if Allow multimedia reception is set to No , or Incoming multi- media messages is set to Reject . Configuration settings > Configuration â only the configurations that support multimedia messaging are show n. Select a service provider, Default , or P ersonal config. for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings. E-mail messages The settings affect the sending, rece iving, and viewing of e-mail. You may receive the settings as a configura tion message. See âÂÂConfiguration settings service,â p. 10. You can also enter the settings manually. See âÂÂConfiguration,â p. 67. Select Menu > Messaging > Message settings > E-mail messages and from the following options: Configuration â to select the set that you want to activate Account â to select an account pr ovided by the service provider My name â to enter your name or nickname E-mail address â to enter your e-mail address Incoming server type â to select the incoming e-mail server type Login information â to enter information according to the server type Incoming mail settings â to select the maximum number of mails that shall be retrieved Outgoing mail settings (SMTP) â to enter SMTP (simple mail transfer protocol) information and setting options used when sending e-mail RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 47 Wednesday, November 29 , 2006 2:00 PM
Messaging 48 Display terminal window > Ye s â to per form manual user authentication for intranet connections RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 48 Wednesday, November 29 , 2006 2:00 PM
Contacts 49 6. Contacts In Contacts , you can store and manage contact information, such as names, phone numbers, and addresses. You can save names and numbers in the internal memory of th e phone, the SIM card memory, or in a combination of the two. Names and numbers saved in the SIM card memory, are indicated by . â Search Select Menu > Contacts > Names and scroll through the list of contacts or enter the first letter of the name you are trying to find. â Save names and phone numbers Names and numbers are saved in the used memory. Select Men u > Contacts > Names > Options > Add new contact and enter the last name, first name, and the phone number. â Save numbers, it ems , or an image In the phone memory for contacts, you can save different types of phone numbers and short text items per na me. You can also assign a ringing tone to a contact. The first number you save is automa tically set as the default number, and it is indicated with a frame around the number type indicator (for example, ). When you select a na me, the default number is used unless you select another number. 1. Make sure that the memory in use is either Phon e or Phone and SIM . 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail . 3. To add a number, select Number and one of the number types. 4. To add another detail, select a text type, an image from the Gallery , or a new image. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 49 Wednesday, November 29 , 2006 2:00 PM
Contacts 50 5. To change the number type, scroll to the number you want, and select Options > Change type . To set the selected number as the default number, select Set as default . 6. Enter the number or text item; to save it, select Save . 7. To return to standby mode, select Back > Exit . â Copy a contact Search for the contact you want to copy, and select Options > Copy contact . You can copy names and phone numbers from the phone contact memory to the SIM card memor y, or vice versa. The SIM card memory can save names with one phone number attached to them. â Edit contact details 1. Search for the contact yo u want to edit, select Details ; and scroll to the name, number, text item, or image you want. 2. To edit a name, number, or text item, or to change image, select Options > Edit . You cannot edit an ID when it is on the IM contacts or the Subscribed names list. â Delete contacts or details To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone mem. or From SIM card . Confirm with the security code. To delete a contact, search for the contact you want, and select Options > Delete contact . To delete a number, text item, or an image attached to the contact, search for the contact, and select Details . Scroll to the desired detail, and select Options > Delete > Delete number , Delete detail , or Delete image . Deleting an image from contac ts does not delete it from the Gallery . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 50 Wednesday, November 29 , 2006 2:00 PM
Contacts 51 â Business cards You can send and receive a personâÂÂs contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia , Via text message , or Via Bluetooth . When you have received a business card, select Sh ow > Save to save the business card in the phone memory. To discard the business card, select Exit > Ye s . â Settings Select Menu > Contacts > Settings and one of the following options: Memory in use â to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and number from both memories. In that case, when you save names and numbers, they are saved in the phone memory. Contacts view â to select how the names and numbers in Contacts are displayed Name display â to select whether the contactâÂÂs first or last name is displayed first Font size â to set the font size for the list of contacts Memory status â to view the free and used memory capacity â Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into calle r groups with a different ringing tone and a group image. â Speed dialing To assign a number to a speed dialing key, select Menu > Contacts > Speed dials , and scroll to the speed dialing number that you want. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 51 Wednesday, November 29 , 2006 2:00 PM
Contacts 52 Select Assign , or if a number has already been assigned to the key, select Options > Change . Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. To make a call using speed dia ling, see âÂÂSpeed dialing,â p. 24. â Service and my numbers Select Menu > Contacts and one of the following options: Service numbers â to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers â to view the phone numbers assigned to your SIM card. This is only shown if the numbers are included on your SIM card. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 52 Wednesday, November 29 , 2006 2:00 PM
Call log 53 7. Call log The phone registers the ph one numbers of identified missed, received, and dialed calls, an d the approximate length of your calls. The phone registers missed and re ceived calls only if the network supports these functions, and the phone is turned on and within the networkâÂÂs service area. To view the information on your calls, select Menu > Log > Missed calls , Received calls , or Dialled numbers . To view your recent missed and received calls and the dialed numbers chronologically, select Call log . To view the contacts to whom you most recently sent messages, select Message recipients . To view the approximate information on your recent communications, select Menu > Log > Call duration , Packet data counter , or P acket data conn. timer . To view how many text and multime dia messages you have sent and received, select Menu > Log > Message log . Note: The actual invoice for calls and services from your service provider may vary, depending on ne twork features, rounding off for billing, taxes, and so forth. Some timers, including the life timer, may be reset during service or software upgrades. â P ositioning information The network may send you a location request. You can ensure that the network will deliver location information of your phone only if you approve it (network service). Contac t your service provider to subscribe and to agree upon the delivery of location information. Some networks allow you to request the position of the phone (network service). To accept or reject the location request, select Accept or Reject . If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your service provider. The RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 53 Wednesday, November 29 , 2006 2:00 PM
Call log 54 phone displays 1 missed position request . To view the missed location request, se lect Show . To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > P osition log > Open folder or Delete all . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 54 Wednesday, November 29 , 2006 2:00 PM
Settings 55 8. Settings Use this menu to set or ch ange your profiles, themes, personal shortcuts, time and date settings, call settings, connectivity settings, phone settings, main dis play settings, mini display settings, tone settings, enhancement settings, configuration settings, security settings, and to restore factory settings. â Profiles Your phone has various setting groups , called profiles, for which you can personalize the phone tones for different events and environments. Select Menu > Settings > Profiles and a profile. ⢠To activate the selected profile, select Activate . ⢠To personalize the profile, select Personalise , and select the setting you want to change: then, make the changes. ⢠To set the profile to be active until a certain time (up to 24 hours), select Timed and set the time you want the profile setting to end. When the time set for the profile expires, the previous profile (that was not timed) becomes active. â Themes You can change the look of your phon e display by activating a theme. A theme can include a wallpaper image, a ringing tone, a screen saver, and a color scheme. Themes are stored in the Gallery . Select Menu > Settings > Themes and one of the following options: Select theme â to set a theme in your phone. A list of folders in the Gallery opens. Open the Themes folder, and select a theme. Theme downloads â to open a list of links to download more themes. See âÂÂDownload settings,â p. 97. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 55 Wednesday, November 29 , 2006 2:00 PM
Settings 56 â To ne s You can change the settings of the selected active profile. Select Menu > Settings > Tone s . a nd edit the available s ettings. You can find the same settings when you personalize a profile in the Profiles menu. See âÂÂProfiles,â p. 55. To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for: . Scroll to the caller group you want or All calls , and select Mark . â Display With display settings, you can pers onalize your display view of the phone. Main display You can select display settings for the start screen (main display). Standby mode settings Select Menu > Settings > Main display and one of the following options: Wallpaper â to display a background picture (wallpaper) on the start screen. Select Wallpapers and from the following: ⢠Image or ⢠Slide set and an image or a slide from the Gallery or ⢠Open Camera. To download more graphics, select Graphic downloads . Select Active standby â to display the active standby. Select one of the following options: ⢠P ersonalise view â to change the content and to reorganize the content on the display Options > Mo ve content . ⢠Active standby key â to change the key for accessing the navigation mode. The same setting is also in the My shortcuts menu. See âÂÂEnabling active standby,â p. 59. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 56 Wednesday, November 29 , 2006 2:00 PM
Settings 57 Standby mode font colour â to select the color for the texts on the display in the standby mode Navigation key icons â to set the scroll key icons that are shown in the standby mode Fold animation â to select whether an animation is shown when you open and close the fold. The fold anima tion is only visible if it is supported by and selected from the active theme set in your phone. See âÂÂThemes,â on p. 55. Operator logo â to set your phone to display or hide the operator logo. Cell info display > On â to receive information from the network operator depending on the networ k cell used (network service). Screen saver To select a screen saver, select Menu > Settings > Main display > Screen saver > Screen savers > Image , Slide set , Open Camera , Video clip , Analogue clock or Digital clock . To download more screen savers, select Graphic downloads . To enter the time afte r which the screen saver is activated, select Time-out . To activate the screen saver, select On . Font size This feature allows you to select the font size for Messaging , Contacts and We b . Select Menu > Settings > Main display > Font size and one of the following: Messaging â to select the font size you want to use for messages. Select either Extra small font , Normal f ont or Large font . Contacts â to select the font size you want to display your contactsâ names. Select either Normal font or Large font . Web â to select the font size you want to display for mobile Internet pages. Select either Extra small font , Small font or Large font . Mini display You can select display settings for the mini display on the front of your phone. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 57 Wednesday, November 29 , 2006 2:00 PM
Settings 58 Screen saver Select Menu > Settings > Mini display > Screen saver > Analogue clock or Digital clock . To enter the time after which the screen sa ver is activated, select Time-out . To activate the screen saver, select On . â Time and date Select Menu > Settings > Time and date and one of the following options: Time â to set the phone to show or hide the clock in the standby mode, adjust the time, and select the time zone and the time format. Date â to set the phone to show or hide the date in the standby mode, set the date, and select the date format and date separato r. Auto-update of date & time (network service) â to set the phone to automatically update the time and date to the appropriate time zone. â My shortcuts You can set your most frequently used functions to be quickly accessed through the My shortcuts feature. Left selection key To select a function from the list fo r the left selection key, select Menu > Settings > My shortcuts > Left selection key . See also âÂÂStandby mode,â p. 19. To activate a function in the standby mode if the left selection key is Go to , select Go to and the function you want on your personal shortcut list. Select Options and from the following options: Select options â to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark . Organise â to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move . Scroll to where you want to move the function, and select OK . Repeat this RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 58 Wednesday, November 29 , 2006 2:00 PM
Settings 59 process, if you want to move an other function. When you have completed rearranging the f unctions you want, select Done > Ye s . Right selection key To set a specific function (from a pr edefined list) to the right selection key, select Menu > Settings > My shortcuts > Right selection key . This function can be used only if it is supported by your service provider. Navigation key This key allows you to scroll up, down, left, and right. To assign other phone functions (from a predefined lis t) to the navigation key, select Menu > Settings > My shortcuts > Navigation key . Scroll to the key you want, select Change and a function from the list. To remove a shortcut function from the key, select (empty) . To reassign a function for the key, select Assign . Enabling active standby This function allows you to select how the active standby mode is activated. Select Menu > Settings > My shortcuts > Ac ti ve st a nd by key > Navigation key up , Navigat. key down , or Nav . key up/down . Voice commands You can call contacts and carry out phone functions by saying voice commands. Voice commands are la nguage-dependent. To set the language, see V oi ce recognition language in âÂÂPhone,â p. 66. To select the phone functions to ac tivate with a voice command, select Menu > Settings > My shortcuts > V oice commands and a folder. Scroll to a function you want. indicates that the voice tag is activated. To deactivate the voice command, select Options > Remove . To activate the voice tag, select Add . To play the activated voice command, select Playback . To use voice commands, see âÂÂEnhanced voice dialing,â p. 24. To manage the voice commands, scro ll to a phone function, and select from the following options: RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 59 Wednesday, November 29 , 2006 2:00 PM
Settings 60 Edit or Remove â to change or deactivate the voice command of the selected function Remove all â to deactivate voice commands to all functions in the voice commands list. â Connectivity You can connect the phone to compa tible devices, using Bluetooth wireless technology or USB data cable (CA-53) connection. You can also define the settings for EGPRS or GPRS dial-up connections. Bluetooth wireless technology This device is compliant w ith Blue tooth Specification 2.0 supporting the following profiles: hands-free, headset, network access, object push profile, file transfer profile, dial-up networking profile , SIM access profile, serial port profile, service discovery application profile, pe rsonal area network profile, advanced audio distribution profile and audio vi deo remote control profile. To ensure interoperability between o ther devices supporting Bluetoo th technology, use Nokia approved enhancements for this mo del. Check wi th the manufacturers of other devices to determine t heir compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local author ities or service provide r. Features that use Blueto oth technology, or allow s uch features to run in the background while using other features, in crease the demand on battery power and reduce the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (33 feet). Since devices using Bluetooth technology communicate us ing radio waves, your phone and the other devices do not need to be in direct line of sight, although the connection can be subject to interf erence from obstructions, such as walls or from other electronic devices. To set up a Bluetooth connection, do the following: 1. Select Menu > Settings > Connectivity > Bluetooth . 2. To activate or deactivate the Bluetooth function, select Bluetooth > On or Off . indicates an active Bluetooth connec tion. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 60 Wednesday, November 29 , 2006 2:00 PM
Settings 61 3. To search for compatible Bl uetooth audio devices, select Search for audio enhancements and the dev ice that you want to c onnect to the phone. To search for any Bluetooth device in r ange, select P aired devices . Select New to list any Bluetooth device in range. Scroll to a device, and select Pa i r . 4. Enter the Bluetooth passcode of th e device to associate (pair) the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer. Settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name . Operating the phone in hidden mode is a safer way to avoid malicious software. Do not accept Bluetooth connectivity from sourc es you do not tru st. Turn off the Bluetooth functionality as an other alternative. This will not affect other functions of the phone. Connection Select Menu > Settings > Connectivi ty > Bluetooth . To check which Bluetooth connection is currently active, select A ctive devices . To view a list of Bluetooth devices that are curre ntly paired with the phone, select P aired devices . Select Options to access available options, depending on the status of the device and the Bluetooth connection. Packet data General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP) based network. GPRS is a data bearer that enables wireless access to data networks such as the Internet. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 61 Wednesday, November 29 , 2006 2:00 PM
Settings 62 Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability of EGPRS or GPRS and data transfer speed, contact your network operator or service provider. The applications that may use EGPRS or GPRS are MMS, video streaming, browsing sessions, e-ma il, remote SyncML, Java application downloading, and the PC dial-up. When you ha ve selecte d GPRS as a data bearer, the phone uses EGPRS instead of GPRS, if this is available in the network. You cannot select between EGPRS and GPRS, but for some applicat ions you may be able to select GPRS or GSM data (circuit switched data, CSD). To define how to use the service, select Menu > Settings > Connectivity > P acket data > P acket data connection and one of the following options: When needed â to set the packet data registration and connection to established when an application using packet data needs it and closed when you end the application. Always online â to set the phone to automatically register to an packet data network when you switch the phone on. or indicates that the GPRS or EGPRS service is available. If you receive a call or a text message, or make a call during a GPRS or EGPRS connection, or indicates that the GPRS or EGPRS connection is suspended (on hold). Packet data settings You can connect the phone using Blue tooth wireless technology or USB data cable connection to a compati ble PC and use the phone as a modem to enable EGPRS or GPRS connectivity from the PC. To define the settings for EGPRS or GPRS connections from your PC, select Menu > Settings > Connectivity > Packet data > P acket data settings > A ctive access point , and activate the access point you want to use. Select Edit active access point > Alias for access point , enter a name to change the access poin t settings, and select OK . Select Packet data access point , enter the access point na me (APN) to establish a connection to an EGPRS or GPRS network, and select OK . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 62 Wednesday, November 29 , 2006 2:00 PM
Settings 63 You can also set the EGPRS or GPRS dial-up service settings (access point name) on your PC, by using th e One Touch Access software. See âÂÂNokia PC Suite,â p. 102. If you have set the settings both on your PC and on your phone, the PC settings are used. Data transfer and synch ronization Synchronize your data from calendar, notes, and contacts with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service). Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. To synchronize with a remote Internet server is not possible without a SIM card. To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another c ompatible device, the partner is automatically added to the list, us ing the contact data from the other device. Server sync and PC sync settings are the or iginal items in the list. To add a new partner to the list , such as a new device, select Menu > Settings > Connectivity > Data transfer > Options > Add contact > Phone sync or Phone copy , and enter the settings according to the transfer type. To edit the copy and synchronize settings, select a contact from the partner list, and select Options > Edit . To delete a selected partner, select Options > Delete > OK . You cannot delete Server sync and Phone sync . Data transfer with a compatible device For synchronization, Bluetooth wirele ss technology is used. The other device is in the standby mode. To start a data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the list other than Server sync and PC sync . Based on the settings, the selected data is copied or synchronized. The other device also must be activated to receive data. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 63 Wednesday, November 29 , 2006 2:00 PM
Settings 64 Synchronize from a com patible PC To synchronize data from calendar, notes, and contacts from a compatible PC, use Bluetooth wireless technology or a USB data cable (CA-53). You also need the correct ve rsion of Nokia PC Suite software for your phone installed on the PC . See âÂÂComputer connectivity,â p. 102 for information about Nokia PC Suite. Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC by starting the synchronization from the PC. Synchronize from a server To use a remote Internet server, you have to su bscribe to a synchronization service. For more in formation and the settings required for this service, contact your service provider. You may receive the settings as a configuration messag e. See âÂÂConfiguration settings service,â p. 10 and âÂÂConfiguration,â p. 67. If you have saved data on the remote Internet server, you can synchronize your phone by starting the synchronization from your phone. Select Menu > Settings > Connectivity > Data transfer > Server sync . Depending on the settings, select Initialising sync or Initialising copy . If the contacts or calendar are fu ll, synchronizing may take up to 30 minutes to complete, when synchronizing for the first time, or after an interrupted synchronization. USB data cable You can use the USB data cable to transfer data between the memory card inserted in the phone and a c ompatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the memory card for da ta transfer or picture printing, connect the data cable; when the phone displays USB data cable connected. Select mode. , select OK and one of the following options: Nokia mode â to use the cable for Nokia PC Suite RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 64 Wednesday, November 29 , 2006 2:00 PM
Settings 65 Printing & media â to print pictures directly from the phone by using a compatible printer. Data storage â to activate the memory card for data transfer To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode , Printing , or Data storage . â Call Select Menu > Settings > Call and one of following options: Call divert â to forward your incoming calls (network service). Call divert and call barring cannot be active at the same time. See Call barring service in âÂÂSecurity,â p. 68. Anykey answer > On â to answer an incoming call by briefly pressing any key, except the left and right sele ction keys, volume key, camera key, or the end key. Answer when fold is opened > On â to set your phone to answer a call when you open the fold. If the setting is off, you must press the call key after you open the fold. Automatic redial > On â to set your phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. Speed dialling > On and the names and phone numbers assigned to the speed dialing keys, 2 to 9. To dial, press and hold the corresponding number key. Call waiting > Activate â to set the network to notify you of an incoming call while you have a call in progress (network service). See âÂÂCall waiting,â p. 25. Summary after call > On â to briefly display th e approximate duration of the call after each call. Send my caller ID > Ye s â to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 65 Wednesday, November 29 , 2006 2:00 PM
Settings 66 â Phone Select Menu > Settings > Phone and one of the f ollowing options: Language settings > Phone language â to set the display language of your phone. If you select Automatic , the phone selects the language according to the information on the SIM card. ⢠To select the USIM card language, select SIM language . ⢠To set a language for th e voice playback, select V oice recognition lang uage . See âÂÂMake a voice dialing call,â p. 24 and V oice commands in âÂÂMy shortcuts,â p. 58. Memory status â to view the free memory and the used memory for each function in the list Security keyguard â to set the phone to ask for the security code when you unlock the keyguard. Enter th e security code, and select On . When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Automatic keyguard â to set the keypad to lock automatically. Choose On and the time-out to activate the keyguard, or Off to set the automatic keyguard off. Flight query â to set the phone to ask if Flight mode should be used each time the phone is turned on. In Flight mode , all radio connections are turned off. Flight mode should be used in areas sensitive to radio emissions. Welcome note â to create the welcome note you would like to be shown briefly when the phone is turned on Phone updates â to view the current phone software version, to download new phone software and, to install downloaded phone software. See âÂÂPhone so ftware updates,â p. 70. Operator selection > Automatic â to set the phone automatically to select one of the cellular networks available in your area. With Manual , you can select a network that has a roaming agreement with your service provider. Confirm SIM service actions . This option is shown only if supported by your SIM card. See âÂÂS IM services,â p. 101. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 66 Wednesday, November 29 , 2006 2:00 PM
Settings 67 Help text activation â to select whether the phone shows help texts Start-up tone â to select whether the phone plays a start-up tone when the phone is turned on Switch off tone â to select whether the phone plays a switch off tone when the phone is turned off. This menu is only visible if the tone exists in Themes or is part of the powering dow n fu nctionality of your service provider. Fold close handling â to select whether closing the fold causes the phone to go to stand-by mode or to keep all running applications open. â Enhancements This menu is shown only if the phon e is or has been connected to a compatible mobile enhancement, other than the charger. Select Menu > Settings > Enhancements . You can select an enhancement menu if the corresponding enhancement is or has been connected to the phone. Depending on the enhancement, select from one of the following options: Default profile â to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer â to set the phone to answer an incoming call automatically after five seconds. If Incoming call alert is set to Beep once or Off , automatic answer is of f. Lights â to set the lights permanently On . Select Automatic to set the lights on for 15 seconds after a keypress Ignition detector > On â to automatically switch off the phone approximately 20 seconds after you switch off the car ignition, when the phone is connected to the full car kit Text phone > Use text phone > Ye s â to use text phone settings instea d of headset settings â Configuration You can configure your phone with settings that are required for certain services to function correctly. Th e services are multimedia messaging, RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 67 Wednesday, November 29 , 2006 2:00 PM
Settings 68 instant messaging, synchronization, e-mail application, streaming, push to talk, and browser. Your service provider may also send you these settings as a configuration message. To save the configuration settings re ceived as a configuration message, see âÂÂConfiguration settings service,â p. 10. Select Menu > Settings > Configuration and one of the following options: Default configuration settings â to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider supports. To set the configuration se ttings of the service provider as default settings, select Options > Set as default . To delete configuration settings, select Delete . Activate default in all applications â to activate the default configuration settings for supported applications Preferred access point â to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and pa cket data access point or GSM dial- up number. Connect to service provider su pport â to download the configuration settings from your service provider, if this is supported by your service provider P ersonal configuration settings â to add new personal accounts for various services manually, and to acti vate or delete them. To add a new personal account if you ha ve not added any, select Add new ; otherwise, select Options > A dd new . Select the service type, and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate . â Security When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 68 Wednesday, November 29 , 2006 2:00 PM
Settings 69 Select Menu > Settings > Security and one of the following options: PIN code request â to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. Call barring service â to restrict incoming calls to and outgoing calls from your phone (network service). A password is required. Fixed dialling â to restrict your outgoing calls to selected phone numbers, if this function is supported by your SIM card. Closed user group â to specify a group of people whom you can call and who can call you (network service). Security level > Phone â the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when th e SIM cardâÂÂs memory is selected and you want to change the memory in use. Access codes â to set the PIN code or UPIN code in use, or to change the security code, PIN code, UPIN code, PIN2 code, and call barring password. Code in use â to select whether the PIN code or UPIN code should be active. Authority certificates or User certificates â to view the list of the authority or user certificates downloaded into your phone. See âÂÂCertificates,â p. 99. Security module settings â to view Security module details , activate Module PIN request , or change the module PIN and signing PIN. See also âÂÂAccess codes,â p. 9. â Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett. and enter the security c ode. Data that you have entered or downl oaded is not dele ted. For example, names and numbers in Contacts are not affected. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 69 Wednesday, November 29 , 2006 2:00 PM
Settings 70 â Phone software updates You may initiate phone software updates from the Phone updates menu. Also, your service provider may initiate the updates by sending them over the air directly to your device. This function is known as firmware over the air (FOTA). Warning: If you install a software update, you cannot use the device, even to make eme rge ncy calls, until the update is completed and the device is restar t e d . B e s u r e t o b a c k u p d a t a before accepting a FOT A update. Download Select Menu > Settings > Phone > Phone updates to request available phone software updates from yo ur service provider. Select Current software details to display the current software version. Select Download phone software to download and install a phone software update (if an update is available). Follow the instructions on the display. Install Select Install so ftware update to start the installation, if you cancelled the installation after the download. The software update may take several minutes. Note: If there are problems with the download or installation, contact your service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 70 Wednesday, November 29 , 2006 2:00 PM
Operator menu 71 9. Operator menu Your service provider may have pr ogrammed an operator-specific menu into your phone. If this menu exists in your phone, its functions depend entirely upon the service provider. Contact your service provider for more information. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 71 Wednesday, November 29 , 2006 2:00 PM
Gallery 72 1 0. Gallery In this menu, you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any conten t and activation key before acquiring them, as they may be subject to a fee. The files stored in the Gallery use the memory capacity of the phone. You can use a compatible memory card to extend the memory capacity to store images, themes, graphics, ri nging tones, video clips, and sound clips in the Gallery . To manage the files and folders, do the following: 1. Select Menu > Gallery . A list of fol ders is shown. If a memory card is inserted in the phone, the folder Memory card , (unformat.) , or the name of the memory card is shown. 2. Scroll to the folder you want. To view a list of files in the folder, select Open . For the available options, select Options . 3. Scroll to the file you want to view, and select Open . For the available options, select Options . â Format memory card To format a new memory card, select Menu > Gallery . Scroll to the memory card folder, and select Options > Format mem. card . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 72 Wednesday, November 29 , 2006 2:00 PM
Media 73 11 . M e d i a â Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GPP format. The camera lens is on the front of the phone. The color display works as a viewfinder. Take a photo 1. Select Menu > Media > Camera > Capture , or press the camera key and select Capture . The phone saves the photo in Gallery > Images , unle ss you set the phone to use the memory card to save photos. 2. To take another photo, select Back . 3. To zoom in or out, press the four-way navigation key up or down. 4. To take up to five photos in quick succession, select Options > Img. sequence on > Sequen. To take another photo, select Options > New image . The higher the resolution, the fewer photos you can take sequentially. 5. To send the photo as a multimedia message, select Send . 6. To set a timer to delay capturing a photo for 10 seconds, select Options > Self-timer on > Start . A beep sounds while the self-timer is running, and beeps faster when the camera is about to capture the photo. After the timeout, the camera takes the photo and saves the photo in Gallery > Images . To take a photo when the lighting is dim, the camera automatically adjusts a longer exposure time so the photo quality is better. This Nokia device supports an image capture resolution up to 640 x 480 pixels. The image resolution in th ese materials may appear different. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 73 Wednesday, November 29 , 2006 2:00 PM
Media 74 Record a video clip Select Menu > Media > Camera > Options > Video > Record . To pause recording, select Pa u s e ; to resume recording, select Continue . To stop recording, select Stop . The phone saves the recording in Gallery > Video clips . To view the options, select Options . Camera settings Select Menu > Media > Camera > Options > Settings and edit the available settings. Camera effects Select Menu > Med ia > Camera > O ptions > Effects and one of the available options. â Media player With the media player you can view, play, and download files, such as images, audio, video and animated images. You can also view compatible streaming videos from a ne twork server (network service). Select Menu > Media > Media player > Open gallery , Bookmarks , Go to address , or Media downloads . Set for streaming service You may receive the configuration setti ngs required for the streaming as a configuration message from the netw ork operator or service provider. See âÂÂConfiguration settings servic e,â p. 10. To enter the settings manually, see âÂÂConfiguration,â p. 67. Select Menu > Media > Media player > Streaming sett. and one of the following options: Configuration â Only the configurations that support streaming are displayed. Select a service provider, Default , or Pe rsonal config. Account â Select a streaming service account contained in the active configuration settings. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 74 Wednesday, November 29 , 2006 2:00 PM
Media 75 â Music player Your phone includes a music player for listening to music tracks, recordings, or MP3, MP4, WMA (W indows Media Audio) , AAC, AAC , or eAAC sound files that you have tr ansferred to the phone with the Nokia Music Manager application. Music files are automatically detected and added to the default track list. Play music tracks 1. Select Menu > Media > Music player . The details of the first track on the default track list are shown. 2. To play a track, scroll to the track, and select . 3. To skip to the beginning of the next track, select . To skip to the beginning of the previous track, select twice. 4. To rewind the current track, select and hold . To fast forward the current track, select and hold . Release the key at the position you want. 5. To pause the playing, select . Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Settings In the Music player menu, the following options may be available: Show tracks â to view all the tracks availa ble on the track list. To play a track, scroll to the track you want, and select Play . Music library â to browse your music library according to followi ng criteria: All tracks , Artists , Albums , Genres , Composers or Track lists . To update the contents of your music library, select Update library . Play options > Random > On â to pl ay the tracks in the track list in random order. Select Repeat > Current track or All tracks to play the current track or the en tire track list repeatedly. Media equaliser â to open the list of media equalizer sets. See âÂÂEqualizer,â p. 79. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 75 Wednesday, November 29 , 2006 2:00 PM
Media 76 Add to Favourites â to add the current song to the Favo u ri te s track list. Play via Bluetooth â to connect and play music through a bluetooth enabled audio accessory using bluetooth connection. Use tone â to use the current song as a ring tone for example. You are presented a list of possible options for the tone. Send â to send the selected file using MMS or a bluetooth connection Web page â to connect to a browser service related to the curren t track. This function is only available when the address of the service is included in the track. Music downloads â to download music through web. Memory status â to view the free and used memory capacity â Radio The FM radio depends on an antenna other than the wireless device antenna. A compatible head set or enhancement needs to be at tached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous ex posure to high volume may damage your hearing. Select Menu > Media > Radio . To use the graphical keys , , , or on the p hone display, scroll left or right to the key you want and select it. Save channels 1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, press or . 2. To save the channel to a memory lo cation 1 to 9, press and hold the corresponding number key. 3. To save the channel in the me mory location from 10 to 20, press 1 or 2 , and press and hold the number key (0 to 9 ) you want. 4. Enter the name of the channel, and select OK . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 76 Wednesday, November 29 , 2006 2:00 PM
Media 77 Listen 1. Select Menu > Media > Radio . 2. To scroll to the channel you want, select or , or p ress the headset key. 3. To select a radio channel location , briefly press the corresponding number keys. 4. Select Options and one of the following options: Switch off â to turn off the radio. Save station â to save a new channel by entering the channelâÂÂs name Visual Radio â to set whether the Visual Radio application is used (network service). To check the availability and costs, contact your network operator or service provide r. Some radio channels may send text or graphical information that you can view using the Visual Radio application. Loudspeaker or Headset â to listen to the radio using the loudspeaker (limited to FM radio) or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. Mono output or Stereo output â to listen to the radio in monophonic sound or in stereo. Stations â to select the list of saved ch annels. To delete or rename a channel or edit the visual service ID, scroll to the channel you want, and select Options > Delete statio n or Rename or Visual service ID . Search all stations â to start automatic search and save function for all available radio channels. The sear ch picks up only the strongest available radio channels. Set frequency â to enter the frequency of the radio channel you want. Station directory â to activate the station directory (network service) to seek available radio stations and save them for later use. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 77 Wednesday, November 29 , 2006 2:00 PM
Media 78 Enable visual serv . â to set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual serv . > Automatically . You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted. When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio. â Recorder You can record pieces of sp eech, sound, or an active call. This is useful when recording a name and phone number for writing them down later. Record sound 1. Select Menu > Media > Re corder . 2. To start recording, select . To st art recording d uring a call, select Options > Record . While recording a call, all parties to the call hear a faint beeping sound. When recording a call, hold the phone in the normal position near to your ear. 3. To stop recording, select . The recording is saved in Gallery > Recordings . 4. To listen to the latest recording, select Options > Play last recorded . 5. To send the last recording us ing bluetooth or as a multimedia message, select Options > Send last recorded . List of recordings 1. Select Menu > Media > Re corder > Options > Recordings list . The list of folders in the Gallery is shown. 2. Open Recordings to see the list with recordings. 3. Select Options to select options for files in the Gallery . See â Gallery,â p. 72. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 78 Wednesday, November 29 , 2006 2:00 PM
Media 79 Define a storage folder To use a folder other than Recordings as the default folder in the Gallery , select Menu > Media > Recor der > Options > Select memory and a folder from the list. â Equalizer You can control the sound quality when using the music player by amplifying or attenuating frequency bands. 1. Select Menu > Media > Equaliser . 2. To activate a set, scroll to one of the equalizer sets, and select Activate . 3. To view, edit, or rename a selected set, select Options > View , Edit , or Rename . Not all sets can be edited or renamed. â Stereo widening This function can only be used if your Nokia mobile phone is connected to a compatible stereo headset. To enhance the sound that is availa ble in stereo with a wider stereo effect, select Menu > Media > Stereo widening > On . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 79 Wednesday, November 29 , 2006 2:00 PM
Push to talk 80 12. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network se rvice). PTT provides direct voice communication. To connect, press the volume up key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call i s connected, the people you are calling do not have to answer the phone. The participants should confirm the reception of any communication where appropriate, as there is no other confirmation wh ether the recipients have heard the call. To check availability and costs, and to subscribe to the service, contact your service provider. Roaming serv ices may be more limited than for normal calls. Before you can use the PTT service, you must define the required PTT service settings. Se e âÂÂPTT settings,â p. 85. While you are connected to the PTT service, you can use the other functions of the phone. The PTT service is not connected to traditional voice communication; therefore many of the services available for traditional voice calls (for example, voice mailbox) are not available for PTT communication. â Connect and disconnect To connect to the PTT service, select Menu > Push to talk > Switch PTT on . indicates the PTT connection. indicates that the service is temporarily unavailable. The phone aut omatically tries to reconnect to the service until you disconnect from th e PTT service. If you have added channels to the phone, you are automatically joined to the active channels. To disconnect from the PTT service, select Switch PTT off . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 80 Wednesday, November 29 , 2006 2:00 PM
Push to talk 81 â Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, use the phone normally by holding it to your ear. Warning : Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one ca lls. One-to-one calls are calls you make to only one person. Press and hold the volume up key the entire time you are talking, and hold the phone in front of you so that you can see the display. When you are finished, release the volume up key. Talking is allowed on a first come, first served basis. When someon e stops talking, the first person to press the key used for PT T can talk next. To check the login status of your contacts, select Men u > Push to talk > Contacts list . This service depends on your service provider and is only available for subscribed contacts. indicates the contact is available. indicates the contact is not logged into the PTT service. indicates the contact is unknown. indicates the contact does not want to be disturbed. You cannot call the contact, but you can send a callback request. To subscribe a contact, select Options > Subscribe contact ; or if one or more contacts are ma rked, select Subscribe marked . Make a channel or a group call To make a call to the default channel, press the volume up key. A tone sounds, indicating that the access is granted, and the phone displays your nickname and channel na me. See âÂÂPTT cha nnels,â p. 84. To make a call to a nondefault channel, select Channel list in the PTT menu, scroll to the channel you want, and press the volume up key. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 81 Wednesday, November 29 , 2006 2:00 PM
Push to talk 82 To make a group call from Contacts , the recipients must be connected to the PTT service. Select Menu > Contacts > Group s , scroll to the group you want, and press the volume up key. Make a one-to-one call To start a one-to-one call from the lis t of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the volume up key. You can also select the contact from Contacts . To start a one-to-one call from the list of PTT channels, select Channel list , and scroll to the channel you want. Select Members , scroll to t he contact you want, and press the volume up key. To start a one-to-one call from the list of callback requests you have received, select Callback inbox . Scroll to the contact you want, and press the volume up key. Make a PTT call to multiple recipients You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and must accept the call to participate. Select Menu > Push to talk > Contacts list , and mar k the contacts you want. To make the call, press the volume up key. The contacts who accept the call are shown. Receive a PTT call A short tone notifies you of an incoming PTT call. Information such as the channel name or the nickname (n etwork service) of the caller is displayed. If you have set the phone to first noti fy you of one-to-one calls, accept or reject the call. If you press the volume up key to try to respond to a call while another member is talking, you hear a tone, and Queuing is displayed as long as you press the volume up key. Press and hold the volume up key, and wait for the other person to finish; then you can talk. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 82 Wednesday, November 29 , 2006 2:00 PM
Push to talk 83 â Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. Send a callback request You can send a callback request in the following ways: ⢠To send a callback request from the contacts list in the Push to talk menu, select Contacts list . Scroll to a contact , and select Options > Send PTT callback . ⢠To send a callback request from Contacts , search for the contact you want, select Details , scroll to the PTT address, and select Options > Send PTT callback . ⢠To send a callback request from the channel list in the Push to talk menu, select Channel list , and scroll to the channel you want. Select Members , scroll to the contact you want, and select Options > Send PTT callback . ⢠To send a callback request from the callback request list in the Push to talk menu, select Callback inbox . Scroll to a contact, and select Options > Send PTT callback . Respond to a callback request When you receive a callback request, Callback request received is shown in the standby mode. Select View . The list of contacts who have sent you callback requests is shown. ⢠To make a one-to-one call, press the volume up key. ⢠To send a call request back to the s ender, select Options > Send PTT callback . ⢠To delete the request, select Options > Delete callback . ⢠To view the sender's PTT address, select View . ⢠To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 83 Wednesday, November 29 , 2006 2:00 PM
Push to talk 84 â Add a one-to-one cont act You can save the names of persons to whom you often make one-to-one calls in the following ways: ⢠To add a PTT address to a name in Contacts , search for the desired contact, and select Details > Options > Add detail > PTT address . ⢠To add a contact to the P TT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact . ⢠To add a contact from the channel li st, conne ct to the PTT service, select Channel list , and scroll to the channel you want. Select Members , scroll to the member whose co ntact information you want to save, and select Options . To add a new contact, select Save as . To add a PTT address to a name in Contacts , select A dd to contact . â PTT channels When you call a channel, all members joined to the channel hear the call simultaneously. There are three ty pes of PTT channels: Provisioned channel â A permanent channel created by the service provider. Public channel â Every channel member can invite other persons. Private channel â Only persons who receive an invitation from the channel creator can join in. Add a channel To add a public or priv ate channel, select Menu > Push to talk > Add channel , and edit the settings in the form fields: Channel status: â Select Ac t ive or Inactive . Chnl. nickname: â Enter your nickname for the channel. Chnl. security: â Select Public channel or Private channel . To send an invitation to the group, select Ye s when the phone requests it. You can send the invitation using SMS. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 84 Wednesday, November 29 , 2006 2:00 PM
Push to talk 85 To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit add. manually . Enter the channel address provided by your service provider. Receive an invitation When you receive a text message invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View . 2. To add the channel to your phone, select Save . 3. To set the status for the channel, select Acti ve or Inactive . 4. To reject the invitation, select View > Discard > Ye s . â PTT settings There are two kinds of PTT settings: settings for connecting to the service and settings for use. You may receive the settings for connecting to the service from your network operator or service provide r. See âÂÂConfiguration settings service,â p. 10. You can enter the settings manually. See âÂÂConfiguration,â p. 67. To select the settings for connecting to the service, select Menu > Push to talk > Config. settings and one of the followi ng options: Configuration â to select a service provider, Default , or Personal config. for PTT service. Only the configurations that support the PTT service are shown. Account â to select a PTT service account in the active configuration settings. You can also select from other available options. To edit the PTT settings for us e, select Menu > Push to talk > PTT settings , and one of the following options: 1 to 1 calls > On â to set the phone to allow the reception of one-to- one calls. To make but not rece ive one-to-one calls, select Off . The RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 85 Wednesday, November 29 , 2006 2:00 PM
Push to talk 86 service provider may offer some services that override thes e settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify . PTT key default function > Open contact list , Open channel list , Call contact/group , or Call PTT channel Show my login status > Ye s â to enable the sending of the login status PTT status in startup > Ye s or Ask first â to set the phone to automatically connect to the PTT service when you switch on the phone Push to talk when abroad â to switch the PTT service on or off when the phone is used outside of the home network Send my PTT address > No â to hide your PTT address f rom calls RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 86 Wednesday, November 29 , 2006 2:00 PM
Organizer 87 13. Organizer Your Nokia mobile phone has many useful features for organizing your everyday life. Th e following features are found in Organiser : alarm clock, calendar, to-do list, notes, calculator, countdown timer, and stopwatch. â Alarm clock The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is turned off if there is enough power in the battery. To set the alarm, select Menu > Organiser > Alarm clock > Al arm time , and enter the alarm time. To change the alarm time when the alarm time is set, select On . To set the phone to alert you on selected days of the week, select Repeat alarm . To select the alarm tone or set a ra dio channel as the alarm tone, select Menu > Organiser > Alarm clock > Alarm tone . If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last channel you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default alarm tone replaces the radio. To set a snooze time-out, select Snooze time-out , and the time you want. Alert tone and message The phone sounds an alert tone and flashes Alarm! and the current time on the display, even if the phone is switched off. To stop the alarm, select Stop . If you let the phone continue to sound the alarm for a minute or select Snooze , the alarm stops for the selected snooze time-out and then resumes. If the alarm time is reached while the device is switched off, the de vice switches itself on and starts sounding the al arm tone. If you select Stop , the device asks whether you want to activa te the device for calls. Select No to switch off the RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 87 Wednesday, November 29 , 2006 2:00 PM
Organize r 88 device or Ye s to make and receive calls. Do not select Ye s when wireless phone use may cause interference or danger. â Calendar The calendar helps you keep track of reminders, calls that you need to make, meetings, and birthdays. Select Menu > Organiser > Cal endar . The current day is indicated by a fr ame in the month vi ew. If there are any notes set for the day, the day is in bold type. To view the day notes, select View . To view a week, se lect Options > Week vi e w . To delete all notes in the calendar, select the month or week view and Options > Delete all notes . Other options for the calendar day view are make a note; delete, edit, or move a note; copy a note to another day; send a note with Bluetooth wireless technology; or send a note as a text message or multimedia message to the calendar of another compatible phone. In Settin gs , you can set the date and time settings. In the Auto-delete notes option, you can set the phone to delete old note s automatically after a specified time. Make a note Select Men u > Organiser > Calendar , the date you want, and Options > Make a note and one of the following note types: Meeting , Call , Birthday , Memo or Reminder . Note alarm The phone beeps, and displays the note. If a call note appears, to call the displayed number, press the call key. To stop the alarm and to view the note, select View . To stop the alarm for 10 minutes, select Snooze . To stop the alarm without viewing the note, select Exit . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 88 Wednesday, November 29 , 2006 2:00 PM
Organizer 89 â To-do list You can save a note for a task that yo u have to do, select a priority level for the note, and mark it as done when you have completed it. You can sort the notes by priority or by date. To-do notes 1. Select Menu > Orga niser > To-do list . 2. If no note is added, select Add note; otherwise, select Options > Add . 3. Write the note, select the priority, set the deadline and the alarm type for the note, and select Save . 4. To view a note, scroll to it, and select View . â Notes Use Notes to write and send notes to compatible devices by using SMS or MMS. 1. Select Menu > Organi ser > Notes . 2. To make a note if one is not added, select Add note ; otherwise, select Options > Make a note . 3. Write the note, and select Save . 4. To view a note, scroll to it, and select View . â Calculator The calculator in your phone provides basic arithmetic and trigonometric functions, calculates th e square and the square root, the inverse of a number, and converts currency values. Note: This calculator has limite d accura cy and is designed for simple calculations. Select Menu > Org aniser > Calculator . Press # for a decimal point. Scroll to the desired operation or function, or select it from the Options . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 89 Wednesday, November 29 , 2006 2:00 PM
Organize r 90 To save the exchange rate, select Options > Exchange rate . To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign . â Timer 1. Select Menu > Organiser > Timer > Normal timer ; enter the alarm time in hours, minutes, and seconds; and select OK . You can write your own note text, which will display when the time expires. 2. To start the timer, select Start . 3. To change the countdown time, select Change time . 4. To stop the timer, select Stop timer . If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text (if it is set) or Countdown time up . Stop the alarm by pressing any ke y. If no key is pressed, the alarm automatically stops within 60 seconds. To stop the alarm and to delete the note text, select Exit . To restart the countdown timer, select Restart . â Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the ot her functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 90 Wednesday, November 29 , 2006 2:00 PM
Applications 91 14. Applications â Games Your phone software includes some games. Launch Select Menu > Applications > Games , scroll to the game you want, and select Open . For options related to a game, see âÂÂOther application options,â p. 91. Downloads Select Menu > Applications > Options > Downloads > Game downloads . The list of available bookmarks is shown. Important: Only install and use applications and other software from sources that offer adequate securi ty and protection against harmful software. Settings To set sounds, lights, and shakes for the game, select Menu > Applications > Options > App. settings . â Collection Your phone software includes some Java applications, such as a world clock. Launch an application Select Menu > Applications > Collection ; scroll to an application; and select Open , or press the call key. Other application op tions Delete â to delete the application or application set from the phone RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 91 Wednesday, November 29 , 2006 2:00 PM
Applications 92 Details â to give additional information about the application Update version â to check if a new ver sion of the application is available for download from the Web (network service) App. access â to restrict the application from accessing the network. Different categories are shown. Se lect in each category one of the available permissions. Web page â to provide further information or additional data for the application from an Internet page (netwo rk service). It is only shown if an Internet addres s has been provided with the application. Download applications Important: Only install and use applications and other software from sources that offer adequate securi ty and protection against harmful software. Your phone supports J2ME⢠Java ap plications. Make sure that the application is compatible with your phone before downloading it (network service). You can download new Java appl ications in different ways: ⢠Select Menu > Applications > Options > Downloads > App. downloads , and the list of available bookmarks is shown. For the availability of different serv ices, pricing, an d tariffs, contact your service provider. ⢠Use the game download func tion. See âÂÂDownloads,â p. 91. ⢠Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone. Your device may have some bookmarks load ed for site s not affiliated with Nokia. Nokia does not warrant or endorse these si tes. If you choose to access them, you should ta ke the sa me precau tions, fo r securi ty or con tent, a s you woul d with any Internet site. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 92 Wednesday, November 29 , 2006 2:00 PM
Web 93 15. W eb Your phone has a built-in browser you can use to connect to selected services on the mobile Internet. Many wireless mobile Internet access features are netw ork-dependent, and some features may not be available. Contact your service provider for more information. â Techno logy background A technology called wireless applic ation protocol (WAP) is to mobile devices what the world wide web (WWW) is to personal computers. Most WAP sites are made up of te xt and hyperlinks. Some pages even contain low-resolution graphi cs, or require data input. You may not be able to view all the details of the mobile Internet pages, as page appearance may va ry due to screen size. â Service provider Because mobile Internet content is de signed to be viewed from your phone, your service provider is now your mobile Internet service provider as well. It is likely that your service provider has created a home page and set up your WAP browser to go to this page when you log on to the mobile Internet. Once at your serv ice providerâÂÂs home page, you may find links to a number of other sites. â Access service Set up service You may receive the configuration se ttings required for browsing as a configuration message from the network operator or service provider that offers the service that you want to use. See âÂÂConfiguration settings service,â p. 10. You can also ente r all the configuration settings manually. See âÂÂConfiguration,â p. 67. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 93 Wednesday, November 29 , 2006 2:00 PM
Web 94 Activate the settings Ensure that the Web settings of the service you want to use are activated. 1. Select Menu > We b > Settings > Configuration settings > Configuration . Only the configurations that support the browsing service are shown. 2. Select a service provider or P ersonal config. for browsing. 3. Select Account and a browsing service account contained in the active configuration settings. 4. If you want to perform manual user authentication for intranet connections, select Display terminal window > Ye s . Connect to a service There are several ways to conn ect to a service. ⢠To open the serviceâÂÂs home page, select Menu > We b > Home ; or in the standby mode, press and hold 0 . ⢠To select a bookmark, select Menu > Web > Bookmarks . ⢠To select the last viewed we b site, select Me nu > Web > Last web address . ⢠To enter the address of the servic e, select Menu > Web > Go t o address , enter the address of the service, and select OK . â Browse It should not be necessary to manually configure the browser on your phone. Normally this is done by yo ur service provide r once you have subscribed to the feature. Contact your service provider if you have problems using the browser. After you make a connection to the se rvice, yo u can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 94 Wednesday, November 29 , 2006 2:00 PM
Web 95 If EGPRS or GPRS is selected as the data bearer, either or is shown in the top left of the display du ring browsing. If you receive a call or a text message, or make a call during an EGPRS or GPRS connection, or is shown in the top right of the display to indicate that the EGPRS or GPRS connection is susp ended (on hold). After a call, the phone tries to reconnect the EGPRS or GPRS connection. Phone keys ⢠To browse through the page, press the scroll key in any direction. ⢠To select a highlighted item, press the call key. ⢠To enter letters and nu mbers, press the ke ys, 0 to 9 . ⢠To enter special characters, press * . Options Beside the options available on your device, your service provider may offer other options. Direct calling The browser supports functions that you can access while browsing. You can make a phone call or save a na me and a phone number from a page. Appearance settings While browsing, select Options > Other options > App ear . settings ; or in the standby mode, select Menu > Web > Settin gs > Appearance settings and one of the following options: Text wrapping > On â to s et the text to continue on th e next line in the display. If you select Off , the text is abbreviated. Font size â to set the font size for mobile Internet pages. Show images > No â to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures. Alerts > Alert for unsecure connection > Ye s â to set the phone to alert when a encrypted connection changes to an unencrypted one during browsing. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 95 Wednesday, November 29 , 2006 2:00 PM
Web 96 Alerts > Alert for unsecure it ems > Ye s â to set the phone to alert when a encrypted page contains an uns ecure item. These a lerts do not guarantee a secure connection. For more information, see âÂÂBrowser security,â p. 98. Character encoding > Content encoding â to select the encoding for the browser page content Character encoding > Unicode (UTF-8) web addresses > On â to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a web page cr eated in a foreign language. Screen size > Full or Small â to set the screen layout JavaScript > Enable â to enable Java Script⢠â Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See âÂÂCache memory,â p. 98. While browsing, select Options > Other options > Security > Cookie settings ; or in the standby mode, select Menu > We b > Settings > Security settings > Cookies . To allow or prevent the phone receiving cookies, select Allow or Reject . Scripts over secure connection You can select whether to allow th e running of scripts from a secure page. The phone supports WML scripts. While browsing, select Options > Other options > Security > WMLScript sett. ; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection . To allow the scripts, se lect Allow . â Bookmarks You can save page a ddresses as bookmarks in the phone memory. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 96 Wednesday, November 29 , 2006 2:00 PM
Web 97 1. While browsing, select Options > Bookmarks ; or in the standby mode, select Menu > Web > Bookmarks . 2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or move the bookmark to a folder. Your device may have some bookmarks load ed for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precau tions, for security or content, as you would with any Internet site. Receive When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. The rece ived bookmark is saved automatically to Bookmarks . To view it, select Show > Bookmarks . â Download settings To automatically save all downloaded files in the Gallery , select Menu > Web > Settings > Downloading settings > Automatic saving > On . â Service inbox The phone is able to receive service messages (p ushed messages) sent by your service provider (network provider). Servic e mess ages are notifications (for example, news headlines). These messages may contain a text message or an add ress of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show . If you select Exit , the message is moved to the Service inbox . To access the Service inbox later, select Menu > We b > Ser vice inbox . Settings Select Menu > We b > Settings > Service inbox settings . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 97 Wednesday, November 29 , 2006 2:00 PM
Web 98 To set whether you want to re ceive service message, select Se rvice messages > On or Off . To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On . To view the list of the approved content authors, select Trusted channels . To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On . If you select Off , the phone activates the browser only after you select Retrieve when the phone has received a service message. â Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The inform ation or services you have accessed is stored in the cache. To empty the cache, while browsing, select Options > Other options > Clear the cache . To empty the cache, while in the standby mode, select Menu > We b > Clear the cache . â Browser security Security features may be required for some services, such as online banking or shopping. For such connections, you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificat es are saved in the security module by the service provider. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 98 Wednesday, November 29 , 2006 2:00 PM
Web 99 Select Menu > Settings > Security > Security module settings and one of the following options: Security module details â to show the security module title, manufacturer, and serial number Module PIN request â to set the phone to ask for the module PIN when using services provided by the se curity module. Enter the code, and select On . To disable the module PIN request, select Off . Change module PIN â to change the module PIN, if allowed by the security module. Enter the current module PIN code, then the new code twice. Change signing PIN â to change the signing PIN code for the digital signature. Select the signing PIN you want to change. Enter the current PIN code, then the new code twice. See also âÂÂAccess codes,â p. 9. Certificates Important: Even if the use of certificat es makes the risks involved in remote connections and software in stallation considerably smaller, they must be used correctly in orde r to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificat es have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct . Before changing any certificate sett ings, you must make sure that you really trust the owne r of the certific ate and that the certificat e really belongs to the listed owner. There are three kinds of certifi cat es: serve r certificates, au thority certificates, and user certificates. You may receive th ese certificates from your service provider. Authority certificates and user certificates may also be saved in the securi ty module by the service provider. To view the list of the authority or user certificates downlo aded into your phone, select Menu > Settings > Security > Authority certif icates or User certificates . RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 99 Wednesday, November 29 , 2006 2:00 PM
Web 100 The security indicator is displaye d during a connection, if the data transmission between the phone and the content server is encrypted. The security icon does not indicate th at the data transmission betw een the gateway and the content server (or place where the requested re source is stored) is secure. The service provider secure s the data transmission between the gateway and the content server. Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, such as the title of the book you want to buy and its price. The text to sign is displayed, which may include the amount and date. Check that the header text is Read and that the digital signature icon is shown. If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign . The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN (see âÂÂAccess codes,â p. 9), and select OK . The digital signature icon disappears, and the servic e may display a confirmation of your purchase. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 0 Wednesd ay, November 29, 2006 2 :00 PM
SIM services 101 16. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates, and informatio n on using SIM services, contact your service provider. To access these services , it may be ne cessary to send me ssages or make a phone call for which you may be charged. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 1 Wednesd ay, November 29, 2006 2 :00 PM
Computer connectivity 102 17. Computer connectivity You can send and receive e-mail, an d access the Inte rnet when y our phone is connected to a compatible PC through Bluetooth or USB data cable (CA-53) connection. You can use your phone with a variety of PC connectivity and data communications applications. â USB data storage You can use the USB data cable to transfer data between the memory card inserted in the phone and a c ompatible PC. See âÂÂUSB data cable,â p. 64. After transferring data, ensure that it is safe to unplug the USB data cable from the PC. â Nokia PC Suite Nokia PC Suite software is available for your phone. Nokia PC Suite is a collection of powerful tools that you can use to manage your phone features and data. Each component is a separate program that includes online helps. Nokia PC Suite softwa re, installation instructions, and other documentation is provided free of charge and can be downloaded from the software downloads of the Nokia web site: www.nokia.com/pcsuite . â EGPRS, GPRS, HSCSD, and CSD You can use the enhanced GPRS (EGP RS), general packet radio service (GPRS), high-speed circuit switched da ta (HSCSD), circuit switched data (CSD), and GSM data services with your phone. For availability and subscription to da ta services, contact your service provider. The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data tr ansfer. See âÂÂPacket data settings,â p. 62. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 2 Wednesd ay, November 29, 2006 2 :00 PM
Computer connectivity 103 â Data communicati on applications For information on using a data c ommunication application, refer to the documentation provided with it. Making or answering phone calls du ring a computer connection is not recommended, as it might disrupt the operation. â Bluetooth Use Bluetooth technology to connect your compatible laptop to the Internet. Your phone must have activated a service provider that supports Internet access and your PC has to support Bluetooth PAN (Personal Area Network). After conne cting to the network access point (NAP) service of the phone and pairing with your PC your phone automatically opens a packet data co nnection to the Internet. PC Suite software installation is not necessary when using the NAP service of the phone. See âÂÂBluetooth wireless technology,â p. 60. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 3 Wednesd ay, November 29, 2006 2 :00 PM
Enhanc ements 104 18. Enhancements If you want to enhance phone functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 4 Wednesd ay, November 29, 2006 2 :00 PM
Battery information 105 19. Battery information â Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or th ree complete charge and discharge cycles. The battery can be charged and di scharged hundreds of times, but it will eventually wear out. When the talk and standby times are not iceably shorter than normal, replace the battery. Us e only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. If a replacement battery is being used for the first time or if the b attery has not been used for a prolonged period, it ma y be necessary to connect th e charger then disconnect and reconnect it to begin charging the bat tery. Unplug the charger from the electrical plug and the devi ce when not in use. Do not leave a fully charged battery connecte d to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the disp lay or before any calls can be made. Use the battery only for its intended pu rpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accide ntal short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive ( ) and negative (-) terminals of the battery. (The se look like metal strips on the battery.) This might happe n, for examp le, when you carry a spare battery in your pocket or purse. Short-circuiti ng the terminals may damage t he battery or the connecting object. Leaving the battery in hot or cold places , such as in a closed car in summer or winter conditions, will reduce t he capacity and lifetime of the battery. Always try to keep the battery between 15ðC and 25ðC (59ðF and 77ðF). A device with a hot or cold battery may not wo rk temporarily, even when the battery is fully charged. Battery performance is particularly limi ted in temperat ures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local re gulations. Please recycle when possible. Do not dispose as household waste. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 5 Wednesd ay, November 29, 2006 2 :00 PM
Battery information 106 â Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements l ogo on the packaging, and inspect the hologram label using the following steps: Successful completion of t he four steps is not a total assurance of the authenticity of the battery. If you have an y reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia servic e point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be veri fied, return the battery to the plac e of purchase. Authenticate hologram 1. W hen looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678 919876543210. Turn the battery so that t he numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 6 Wednesd ay, November 29, 2006 2 :00 PM
Battery information 107 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/ batterycheck. To create a text message enter the 20-digit code, for example, 1234567891987 6543210, and send to 44 7786 200276. National and international operator charges will apply. You should receive a mes sage indicating whether the code can be authenticated. What if your battery is not authentic? If you cannot confirm that y our Nokia ba ttery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer ma y be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 7 Wednesd ay, November 29, 2006 2 :00 PM
Care and main tenance 108 Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. ⢠Keep the d evice dry. Precipitat ion, humidity and all types of liquids or moisture can contain minerals that will corrod e electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. ⢠Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. ⢠Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage bat teries, and warp or melt certain plastics. ⢠Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form insi de the device and damage electronic circuit boards. ⢠Do not attempt to open the device othe r than as instructed in this guide. ⢠Do not drop, knock, or shake the devi ce. Rough handling can break internal circuit boards and fine mechanics. ⢠Do not use harsh che micals, cleaning so lvents , or strong detergents to clean the device. ⢠Do not paint the device. Paint can clog the moving parts and prevent proper operation. ⢠Use a soft, clean, dry cloth to clean any lens es (such as camera, proximity sensor, and light sensor lenses). ⢠Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachme nts could damage the device and may violate regulations governing radio devices. ⢠Use chargers indoors. ⢠Always create a backu p of data you want to keep (such as contact s and calendar notes) before sending yo ur device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not work ing properly, take it to the nearest authorized service facility for service. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 8 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 109 Additional safety information Your device and its enhancemen ts may cont ain small parts. Keep them out of the reach of small children. â Operating environment Remember to foll ow any special regulati ons in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operat ing positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or w hen positioned at lea st 1.5 centimeters (5/8 inch) from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should po sition the device the above-stated distance from your body. To transmit data f iles or messages, this device requires a quality co nnection to the network . In some cases, transmission of data files or messages may be delayed until such a conne ction is available. Ensure the above separation distance instructions ar e followed until the transmission is completed. Parts of the device are magneti c. Metallic materials may be attracted to th e device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. â Medical devices Operation of any radio transmitting eq uipment, including wireless phones, may interfere with the functionality of in adequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from ex te rnal RF energy or if you have any questions. Switch off your device in he alth care facilit ies when any regulations posted in these areas instruct you to do so . Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be mainta ined between a wireless phone and a pacemaker to avoid potential interfe rence with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Pers ons with pacemakers should do the following : RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 10 9 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 110 ⢠Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker ⢠Not carry the device in a b reast pocket ⢠Hold the device to t he ear opposite the pacemaker t o minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital w ireless devices may inte rfere with some hearing aids. If interference occurs, consult your service provider. â Vehicles RF signals may affect improperly insta lled or inadequately shielded electronic systems in motor vehicles such as electr onic fuel injection sy stems, electronic antiskid (antilock) braking systems, el ectr onic speed control systems, an air bag systems. For more information, check with the manuf actur er or it s repres entati ve of your vehicle or any equi pment that has been added. Only qualified personnel sh ould service the de vice, or install the device in a vehicle. Faulty installation or servic e may be dangerous and may invalidate any warranty that may apply to the device. Ch eck regularly that all wireless device equipment in your vehicle is mounted an d operat ing properly. Do not store or carry flammable liquids, gases, or explosi ve materials in the same compartment as the device, its parts, or enhancements . For vehicles equipped with an air bag, remember that air bags inflate with grea t force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in- vehicle wireles s equipment is improperly installe d and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the ai rcraft, disrupt the wireless telephone network, and may be illegal. â Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Pot entially explosive atmospheres include areas where you would normally be advi sed to turn off your vehicle engine. Sparks in such areas could cause an explos ion or fire resulting in bodily injury or even death. Switch off the device at re fueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 0 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 111 depots, storage, and d istribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearl y marked. They include belo w deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (s uch as propane or butane), and area s where the air contains ch emicals or particles such as grain, dust, or metal powders. â Emergency calls Important: Wirele ss phones, including t his device, operate usi ng radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in t he device. 2. Press the end key as many times as n eeded to clear the display and ready the device for calls. 3. Enter the official emergency number for your p resent location. Emergency numbers vary by location. 4. Press the call key. If certain features are in use, you may firs t need to turn tho se features off before you can make an emergency call. Consult th is guide or your servi ce provider for more information. When making an emergency ca ll, give all the necessary information as accurate ly as possible. Your wireless device may be the only means of co mmunication at the scene of an accident. Do not end the ca ll until given permission to d o so. â Certificatio n information (SAR) This mobile device meets guidelin es for exposure to radio waves Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were deve loped by the independent scientific organisation ICNIRP and include safe ty margins designed to assure the protection of all persons, regardless of age and he alth. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 1 Wednesd ay, November 29, 2006 2 :00 PM
Additional safety information 112 The exposure guidelines for mobile devices employ a uni t of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) av eraged over 10 grams of t issue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highes t certified power level in all tested frequency bands. The actual SAR level of an operat ing devi ce can be below the maximum value because the device is designed to use only the power required to reach the network. That amount chan ges depending on a number of factors such as how close you are to a network base station. The highest SAR valu e under the ICNIRP guidelines for use of the device at the ear is 1.15 W/kg. Use of device acces sories and enhancemen ts may result in different SAR values. SAR values may vary depending on nation al reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.noki a.com. RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 2 Wednesd ay, November 29, 2006 2 :00 PM
Index 113 Index A access codes 9 active standby 20 , 59 alarm clock 87 antenna 16 B batter y charge 13 strength indicator 19 bluetooth 60 bookmarks 96 brows er 94 busine ss card s 51 C calculator 89 calendar 88 call answer 25 end 24 log 53 make 24 optio ns 26 reject 25 voice mail 44 waiting 25 camera lens 18 use 73 contacts add 49 copy 50 delete 50 delete details 50 edit 50 memory in use 51 my numbers 52 search 49 service numbers 52 D dialing 24 downloads content and applications 11 settings 97 E e-mail application 40 emergency calls 111 enhancements 104 I instant messaging 36 K keyguard 22 keys and parts 18 M maintenance 108 media player 74 memory card format 72 installation 14 slot 18 menu 27 messages audio 35 flash 35 info 44 multimedia 31 SIM 31 templates 35 text 28 voice 43 music player 75 my shortcuts 58 N network services 7 Nokia PC Suite 102 RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 3 Wednesd ay, November 29, 2006 2 :00 PM
Index 114 notes 89 O operator logo 57 operator menu 71 P phone software updates 70 plug and play service 15 profiles 55 PTT. See push to talk push to talk callback requests 83 channel call 81 channels 84 connect 80 discon nect 80 group call 81 make and receive calls 81 one-to-one call 82 settin gs 85 R radio 76 S safety certification information (SAR) 111 emergency calls 111 explosive environments 110 hearing aids 110 medical devices 109 pacemaker s 109 vehicles 110 service commands 44 inbox 97 settings call 65 configuration 67 enhancement 67 message 45 modem 62 phone 66 restore factory 69 security 68 time and date 58 tones 56 shared memory 8 SIM card 12 standby mode 19 standby mode shortcuts 21 stereo widening 79 summary after call 65 synchronization 63 T text entry 29 themes 55 to-do list 89 V voice commands 59 W wallpaper 56 wrist strap 17 RM-198_UG_en1_issue1_correcti ons_20061108.fm Page 11 4 Wednesd ay, November 29, 2006 2 :00 PM