Pioneer Plasma Display Panel Cleaning Tips

H OW TO C LEAN Y OUR P LASMA D ISPLAY P ANEL Regular cleaning will extend the life and performance of your Pioneer plasma display panel. The recommended way to clean the display screen and vents is described below. Note: Always unplug the panel before beginning to clean the unit. Wipe the Display Screen (never use harsh chemicals) Vacuum the Back Vents (your vent locations m ay vary) C LEANING THE D ISPLAY S CREEN The display screen surface scratches easily. Aft er dusting, gently wipe the screen using the provided cleaning cloth or a piece of soft flannel or cotton. Do NOT use a tissue, pa per towel, rough-textured cloth, or a wet cloth. Rough textures can scratch the screen and water can seep under the frame edge. Also avoid rubbing or pushing on the screen. C LEANING THE V ENTS Blocked or clogged panel vents can cause the internal temperature to increase. High temperatures can damage the plasma’s components, resulting in a malfunction or fire. Use a vacuum cleaner to remove any dust build-up from the vents. The best practice is to clean the vents once a month or more often, as needed. Set the vacuum cleaner to its weakest setting to avoid damaging the panel then lightly brush across the vents. Note: For cleaning the pla sm a chassis, do not use so lvents such as ben ze ne or thinner. Wipe with a soft cloth. For additional assistance or cleaning questions, please contact your Pioneer Service Representative.